journal article·2017-09

Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

Tadachika Chiba, Hassan Shirazi, Goro Miyamoto, Tadashi Furuhara

Publisher page

Abstract

A novel method for grain refinement of martensite structures was proposed, in which transformation strain is accumulated by cyclic displacive forward and reverse transformations. This method can refine martensite structures in an Fe-18Ni alloy because a high density of austenite dislocations is introduced by a displacive reverse transformation in addition to an inheritance of dislocations in body-centered cubic martensite into austenite during cyclic transformation. The addition of a small amount of carbon accelerates structure refinement significantly, which results in the formation of ultra-fine-grained structures after ten cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. G. Kurdjumov and G. Sachs: Ztsch. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
2. S. Matsuda, T. Inoue, H. Mimura, and Y. Okamura: Toward Improved Ductility and Toughness, Climax Molybdenum Development Co. Ltd., Kyoto, 1971, pp. 45–66.
3. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
4. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
5. T. Maki, K. Tsuzaki, and I. Tamura: Trans. ISIJ, 1980, vol. 20, pp. 207–14.10.2355/isijinternational1966.20.207 ↗
6. T. Furuhara, K. Kikumoto, H. Saito, T. Sekine, T. Ogawa, S. Morito, and T. Maki: ISIJ Int., 2008, vol. 48, pp. 1038–45.10.2355/isijinternational.48.1038 ↗
7. R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 65–78.10.1007/BF02662639 ↗
8. I. Tamura, K. Tsuzaki, and T. Maki: J. Phys. Coll., 1982, vol. 43, pp. 551–56.
9. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 1139–48.10.1016/j.actamat.2011.11.018 ↗
10. T. Chiba, G. Miyamoto, and T. Furuhara: ISIJ Int., 2013, vol. 53, pp. 915–19.10.2355/isijinternational.53.915 ↗
11. I. Tamura, H. Yoshimura, M. Ibaraki, and M. Tagaya: Trans. JIM, 1964, vol. 5, pp. 47–52.10.2320/matertrans1960.5.47 ↗
12. S. Matsuda and Y. Okamura: Trans. ISIJ, 1974, vol. 14, pp. 363–68.10.2355/isijinternational1966.14.363 ↗
13. N. Nakada, T. Tsuchiyama, S. Takaki, and S. Hashizume: ISIJ Int., 2007, vol. 47, pp. 1527–32.10.2355/isijinternational.47.1527 ↗
14. L. Liu, Z.G. Yang, C. Zhang, and W.B. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7204–09.10.1016/j.msea.2010.07.083 ↗
15. H. Shirazi: Ph.D. Thesis, Tohoku University, 2013.
16. N. Nakada, R. Fukagawa, T. Tsuchiyama, S. Takaki, D. Ponge, and D. Raabe: ISIJ Int., 2013, vol. 53, pp. 1286–88.10.2355/isijinternational.53.1286 ↗
17. Y. Imai, A. Izumi, and S. Hanada: J. Jpn. Inst. Met. Mater., 1967, vol. 31, pp. 898–903.10.2320/jinstmet1952.31.7_898 ↗
18. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
19. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
20. G. Miyamoto, N. Takayama, and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113–16.10.1016/j.scriptamat.2009.02.053 ↗
21. T. Maki, H. Morimoto, and I. Tamura: Trans. ISIJ, 1980, vol. 20, pp. 700–06.10.2355/isijinternational1966.20.700 ↗
22. T. Sakai and M. Ohashi: Tetsu-to-Hagané, 1981, vol. 67, pp. 2000–09.10.2355/tetsutohagane1955.67.11_2000 ↗