Correlation of Thermally Induced Pores with Microstructural Features Using High Energy X-rays
Source abstract
Abstract
Combined application of a near-field High Energy Diffraction Microscopy measurement of crystal lattice orientation fields and a tomographic measurement of pore distributions in a sintered nickel-based superalloy sample allows pore locations to be correlated with microstructural features. Measurements were carried out at the Advanced Photon Source beamline 1-ID using an X-ray energy of 65 keV for each of the measurement modes. The nickel superalloy sample was prepared in such a way as to generate significant thermally induced porosity. A three-dimensionally resolved orientation map is directly overlaid with the tomographically determined pore map through a careful registration procedure. The data are shown to reliably reproduce the expected correlations between specific microstructural features (triple lines and quadruple nodes) and pore positions. With the statistics afforded by the 3D data set, we conclude that within statistical limits, pore formation does not depend on the relative orientations of the grains. The experimental procedures and analysis tools illustrated are being applied to a variety of materials problems in which local heterogeneities can affect materials properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. H.F. Poulsen, Three-Dimensional X-Ray Diffraction Microscopy: Mapping Polycrystals and Their Dynamics (Springer, Berlin, 2004)10.1007/b97884 ↗
2. W. Ludwig, S. Schmidt, E.M. Lauridsen, H.F. Poulsen, J. Appl. Crystallogr. 41, 302–09 (2008)10.1107/S0021889808001684 ↗
3. U. Lienert, S.F. Li, C.M. Hefferan, J. Lind, R.M. Suter, J.V. Bernier, N.R. Barton, M.C. Brandes, M.J. Mills, M.P. Miller, B. Jakobsen, W. Pantleon, JOM 63, 70–77 (2011)10.1007/s11837-011-0116-0 ↗
4. S.F. Li, R.M. Suter, J. Appl. Crystallogr. 46, 512–24 (2013)10.1107/S0021889813005268 ↗
5. H. Toda, Microscopy 63, i3i4 (2014)
6. H. Simons, A. King, W. Ludwig, C. Detlefs, W. Pantleon, S. Schmidt, F. Stöhr, I. Snigireva, A. Snigirev, and H.F. Poulsen: Nat. Comm., 2015, vol. 6, art. 609810.1038/ncomms7098 ↗
7. C.M. Hefferan, J. Lind, S.F. Li, U. Lienert, A.D. Rollett, R.M. Suter, Acta Mater. 60, 43114318 (2012)10.1016/j.actamat.2012.04.020 ↗
8. I.M. McKenna, S.O. Poulsen, E.M. Lauridsen, W. Ludwig, P.W. Voorhees, Acta Mater. 78, 125134 (2014)10.1016/j.actamat.2014.06.028 ↗
9. B. Lin, Y. Jin, C.M. Hefferan, S.F. Li, J. Lind, R.M. Suter, M. Bernacki, N. Bozzolo, A.D. Rollett, G.S. Rohrer, Acta Mater. 99, 6368 (2015)10.1016/j.actamat.2015.07.041 ↗
10. S.F. Li, J. Lind, C.M. Hefferan, R. Pokharel, U. Lienert, A.D. Rollett, R.M. Suter, J. Appl. Crystallogr. 45, 1098–108 (2012)10.1107/S0021889812039519 ↗
11. T.R. Bieler, L. Wang, A.J. Beaudoin, P. Kenesei, U. Lienert, Metall. Mater. Trans. A 45A, 109122 (2014)10.1007/s11661-013-2082-3 ↗
12. J.C. Schuren, P.A. Shade, J.V. Bernier, S.F. Li, B. Blank, J. Lind, P. Kenesei, U. Lienert, R.M. Suter, T.J. Turner, D.M. Dimiduk, J. Almer, Curr. Opin. Solid State Mater. Sci. 19, 235–44 (2014)10.1016/j.cossms.2014.11.003 ↗
13. H. Abdolvand, M. Majkut, J. Oddershede, J.P. Wright, M.R. Daymond, Acta Mater. 93, 246–55 (2015)10.1016/j.actamat.2015.04.020 ↗
14. J. Lind, S.F. Li, R. Pokharel, U. Lienert, A.D. Rollett, R.M. Suter, Acta Mater. 76, 213–20 (2014)10.1016/j.actamat.2014.04.050 ↗
15. R. Pokharel, J. Lind, A.K. Kanjarla, R.A. Lebensohn, S.F. Li, P. Kenesei, R.M. Suter, A.D. Rollett, Annu. Rev. Condens. Matter Phys. 5, 317346 (2014)10.1146/annurev-conmatphys-031113-133846 ↗
16. R. Pokharel, J. Lind, S.F. Li, P. Kenesei, R.A. Lebensohn, R.M. Suter, A.D. Rollett, Int. J. Plast. 67, 217234 (2015)10.1016/j.ijplas.2014.10.013 ↗
17. D.W. Brown, L. Balogh, D. Byler, C.M. Hefferan, J. Hunter, P. Kenesei, S.F. Li, J. Lind, S. Niezgoda, R.M. Suter, Mater. Sci. Forum 777, 112–17 (2014)10.4028/www.scientific.net/MSF.777.112 ↗
18. P.A. Shade, B. Blank, J.C. Schuren, T.J. Turner, P. Kenesei, K. Goetz, R.M. Suter, J.V. Bernier, S.F. Li, J. Lind, U. Lienert, J. Almer, Rev. Sci. Instr. 86, 18 (2015)10.1063/1.4927855 ↗
19. C.T. Sims, Superalloys 1984, 399–419 (1984)
20. D.R. Chang, D.D. Krueger, and R.A. Sprague: Superalloys, 1984, pp. 245–7310.7449/1984/Superalloys_1984_245_273 ↗
21. D. Furrer, H. Fecht, JOM 51, 14–17 (1999)10.1007/s11837-999-0005-y ↗
22. A. Banik, K.A. Green, M.C. Hardy, D.P. Mourer, and T. Reay: Superalloys, 2004, pp. 571–7610.7449/2004/Superalloys_2004_571_576 ↗
23. R.L. Dreshfield, R.V. Miner Jr., Technical Memorandum 79263 (NASA, Cleveland, OH, 1980)
24. R.L. Dreshfield, JOM 39, 16–21 (1987)10.1007/BF03258034 ↗
25. E.S. Huron, R.L. Casey, M.F. Henry, and D.P. Mourer: Superalloys, 1996, pp. 667–7610.7449/1996/Superalloys_1996_667_676 ↗
26. H. Fiedler, T. Sawyer, R. Kopp, A. Leatham, JOM 39, 28–33 (1987)10.1007/BF03258605 ↗
27. H.D. Carlton, A. Haboub, G.F. Gallegos, D.Y. Parkinson, A.A. MacDowell, Mater. Sci. Eng., A 651, 406–14 (2015)10.1016/j.msea.2015.10.073 ↗
28. B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, M. Hofmann, D.J. Jarvis, Mater. & Des. 89, 559–67 (2015)10.1016/j.matdes.2015.09.115 ↗
29. E.S. Huron: US Patent 5,584,948., December 1996
30. T.M. Pollock, S. Tin, J. Propul. Power 22, 361–74 (2006)10.2514/1.18239 ↗
31. D.L. Olmsted, S.M. Foiles, E.A. Holm, Acta Mater. 57, 3694–3703 (2009)10.1016/j.actamat.2009.04.007 ↗
32. Z. Shan, E.A. Stach, J.M. Wiezorek, J.A. Knapp, D.M. Follstaedt, S.X. Mao, Science 305, 654–57 (2004)10.1126/science.1098741 ↗
33. P.R. Cantwell, M. Tang, S.J. Dillon, J. Luo, G.S. Rohrer, M.P. Harmer, Acta Mater. 62, 1–48 (2014)10.1016/j.actamat.2013.07.037 ↗
34. T.J. Garosshen, T.D. Tillman, G.P. McCarthy, Metall. Trans. A 18, 69–77 (1987)
35. M. Uchic, M. Groeber, M. Shah, P. Callahan, A. Shiveley, M. Scott, M. Chapman, and J. Spowart: 1st International Conference on 3D Materials Science, 2012, pp. 195–20210.1007/978-3-319-48762-5_30 ↗
36. P.A. Shade, D.B. Menasche, J.V. Bernier, P. Kenesei, J.S. Park, R.M. Suter, J.C. Schuren, and T.J. Turner: J. Appl. Crystallogr. 49, 700–04 (2016)10.1107/S1600576716001989 ↗
37. Y. Wang, F. De Carlo, I. Foster, and B. Tieman: SPIE Proceedings, 1999, vol. 377210.1117/12.363735 ↗
38. B.A. Dowd, G.H. Campbell, R.B. Marr, V.V. Nagarkar, S.V. Tipnis, L. Axe, and D.P. Siddons: SPIE Proceedings, 1999, vol. 3772
39. F. De Carlo, P.B. Albee, Y.S. Chu, D.C. Mancini, B. Tieman, and S.Y. Wang: SPIE Proceedings, 2002, vol. 450310.1117/12.452840 ↗
40. G.S. Rohrer, D.M. Saylor, B.S. El-Dasher, B.L. Adams, A.D. Rollett, P. Wynblatt, Z. fur Metallkunde 95, 197–214 (2004)10.3139/146.017934 ↗
41. R.M. Suter, D. Hennessy, C. Xiao, U. Lienert, Rev. Sci. Instrum. 77, 123905 (2006)10.1063/1.2400017 ↗
42. C.M. Hefferan, S.F. Li, J. Lind, U. Lienert, A.D. Rollett, P. Wynblatt, R.M. Suter, Computers. Mater. Contin. 14, 209–219 (2009)
43. J.V. Bernier, N.R. Barton, U. Lienert, M.P. Miller, J. Strain Anal. Eng. Des. 46, 527–547 (2011)10.1177/0309324711405761 ↗
44. J.K. Mackenzie, Biometrika 45, 229–40 (1958)10.1093/biomet/45.1-2.229 ↗
45. B.W. Reed, B.L. Adams, J.V. Bernier, C.M. Hefferan, A. Henrie, S.F. Li, J. Lind, R.M. Suter, M. Kumar, Acta Mater. 60, 2999–3010 (2012)10.1016/j.actamat.2012.02.005 ↗
46. F. Wilcoxon, Biom. Bull. 1, 80–83 (1945)10.2307/3001968 ↗
47. A.N. Kolmogorov, G. dell’Istituto Italiano degli Attuari 4, 83–91 (1933)
48. F. Massey Jr., J. Am. Stat. Assoc. 46, 68–78 (1951)10.1080/01621459.1951.10500769 ↗
49. N. Smirnov, Ann. Math. Stat. 19, 279–81 (1948)10.1214/aoms/1177730256 ↗
50. N. Smirnov, Moscow Univ. Math. Bull. 2, 6–50 (1939)