journal article·2016-10

Evolutions of Microstructure and Properties During Cold Rolling of 19Cr Duplex Stainless Steel

Qingxuan Ran, Wanjian Xu, Zhaoyu Wu, Jun Li, Yulai Xu, Xueshan Xiao, Jincheng Hu, Laizhu Jiang

Publisher page

Abstract

Evolutions of microstructure, mechanical, and corrosion properties of 19Cr (Fe-18.9Cr-10.1Mn-0.3Ni-0.261N-0.030C-0.5Si) duplex stainless steel have been investigated during cold rolling at room temperature. Dislocation slip dominated deformation mode of ferrite phase. However, deformation mechanism of austenite phase was different with the increasing cold-rolling reductions. Dislocation slip and strengthening effect of twin boundaries caused pile-up phenomenon at the initial deformation stage. When the amount of cold-rolling reduction attained greater than 50 pct, induced α′-martensite appeared in deformed austenite phase. Hardness of austenite phase was higher than that of the deformed ferrite because of its higher strengthening effect during cold-rolling process. Cold-rolling deformation caused deterioration of the pitting corrosion resistance in 3.5 wt pct NaCl aqueous solution. Pitting corrosion always initiated in the ferrite phase and the phase boundary in the solution-treated alloy. Additional pitting holes appeared in deformed austenite phase because of the decrease in corrosion resistance caused by dislocation accumulation and induced α′-martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. [1] A. Momeni, K. Dehghani and X.X. Zhang: J. Mater. Sci., 2012, vol. 47, pp. 2966-7410.1007/s10853-011-6130-3 ↗
2. Q.X. Ran, J. Li, Y.L. Xu, X.S. Xiao, H.F. Yu and L.Z. Jiang: Mater. Des., 2013, vol. 46, pp. 758-6510.1016/j.matdes.2012.11.017 ↗
3. [3] G. Lothongkum, P. Wongpanya, S. Morito, T. Furuhara and T. Maki: Corros. Sci., 2006, vol. 48, pp. 137-5310.1016/j.corsci.2004.11.017 ↗
4. J. Li, Z.X. Zhang, H. Chen, X.S. Xiao, J.L. Zhao and L.Z. Jiang. Metall. Mater. Trans. A., 2012, vol. 43A, pp. 428-3610.1007/s11661-011-0916-4 ↗
5. [5] N. Pettersson, R.F.A. Pettersson and S. Wessman: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 1062-7210.1007/s11661-014-2718-y ↗
6. [6] A. Eghlimi, M. Shamanian, M. Eskandarian, A. Zabolian and J. Szpunar: Mater. Charect., 2015, vol. 106, pp. 27-3510.1016/j.matchar.2015.05.017 ↗
7. [7] I. Calliari, K. Brunelli, M. Zanellato, E. Ramous and R. Bertelli: J. Mater. Sci., 2009, vol. 44, pp. 3764-910.1007/s10853-009-3505-9 ↗
8. [8] J. Pilhagen and R. SandstrmÖm: Mater. Sci. Eng. A., 2014, vol. 602, pp. 49-5710.1016/j.msea.2014.01.093 ↗
9. [9] R.N. Gunn: Duplex stainless steels, Abington Publishing, Cambridge England, 1997, pp. 110.1533/9781845698775 ↗
10. [10] L.H. Zhang, W. Zhang, Y.M. Jiang, B. Deng, D.M. Sun and J. Li: Electrochem. Acta., 2009, vol. 54, pp. 5387-9210.1016/j.electacta.2009.04.023 ↗
11. [11] A.I. Filho, J.M.D.A. Rollo, R.V. Silva and G. Martinez: Mater. Lett., 2005, vol. 59, pp. 1192-410.1016/j.matlet.2004.12.026 ↗
12. [12] J.Y. Choi, S.W. Hwang and K.T. Park: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 597-60110.1007/s11661-012-1579-5 ↗
13. [13] C. Herrera, D. Ponge and D. Raabe: Acta. Mater., 2011, vol. 59, pp. 4653-6410.1016/j.actamat.2011.04.011 ↗
14. [14] J.Y. Choi, J.H. Ji, S.W. Hwang and K.T. Park: Mater. Sci. Eng. A., 2012, vol. 534, pp. 673-8010.1016/j.msea.2011.12.025 ↗
15. [15] W. Zhang and J.C. Hu: Mater. Charact., 2013, vol. 79, pp. 37-4210.1016/j.matchar.2013.02.003 ↗
16. [16] Q.X. Ran, W. Peng, Y.L. Xu, J. Li, X.S. Xiao, H.F. Yu and L.Z. Jiang: Corros. Sci., 2015, vol. 90, pp. 535-4310.1016/j.corsci.2014.10.046 ↗
17. [17] J. Li, Z.H. Ma, X.S. Xiao, J.L. Zhao and L.Z. Jiang: Mater. Des., 2011, vol. 32, pp. 2199-220510.1016/j.matdes.2010.11.021 ↗
18. [18] C. Tseng, H. Liou and W. Tsai: Mater. Sci. Eng. A., 2003, vol. 344, pp. 190-20010.1016/S0921-5093(02)00404-5 ↗
19. [19] H.S. Cho and K. Lee: Mater. Charact., 2013, vol. 75, pp. 29-3410.1016/j.matchar.2012.10.006 ↗
20. [20] J.Y. Choi, J.H. Ji, S.W. Hwang and K.T. Park: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6012-910.1016/j.msea.2011.04.038 ↗
21. [21] M. Breda, L. Pezzato, M. Pizzo and I. Calliari: Corros., 2014, vol. 6, pp. 15-9
22. [22] Q.X. Ran, Q.H. Liu, Y.L. Xu, W.J. Xu, J. Li, X.S. Xiao, J.C. Hu and L.Z. Jiang: Corros. Sci., 2015, vol. 98, pp. 737-4710.1016/j.corsci.2015.06.013 ↗
23. GB/T 228-2010, Metallic materials-tensile testing at ambient temperature, China Standard Press, 2010
24. J.-O. Anderson, T. Helander, L. Hglund, P. Shi and B. Sundman: Calphad., 2002, vol. 26, pp. 273-31210.1016/S0364-5916(02)00037-8 ↗
25. Thermo-Calc Software TCFE7 Steels/Fe-alloys database version 7. Accessed 06 Oct 2014
26. [26] D. Raabe: Mater. Sci. Eng. A., 1995, vol. 197, pp. 31-710.1016/0921-5093(94)09770-4 ↗
27. [27] D. Raabe: J. Mater. Sci. Technol., 1995, vol. 11, pp. 461-810.1179/mst.1995.11.5.461 ↗
28. [28] L. Remy and A. Pineau: Mater. Sci. Eng. A., 1977, vol. 28, pp. 99-10710.1016/0025-5416(77)90093-3 ↗
29. [29] T.S. Byun: Acta. Mater., 2003, vol. 51, pp. 3063-7110.1016/S1359-6454(03)00117-4 ↗
30. [30] K.-T. Park, G. Kim, S.K. Kim, S.W. Lee, S.W. Hwang and C.S. Lee: Met. Mater. Int., 2010, vol. 16, pp. 1-610.1007/s12540-010-0001-3 ↗
31. [31] J.H. Hollomon. Trans. Metall. Soc. AIME., 1945, vol. 162, pp. 268-90
32. [32] F.J. Humphreys, P.S. Bate, P.J. Hurley. J. Microsc., 2001, vol. 201, 50-5810.1046/j.1365-2818.2001.00777.x ↗
33. [33] Z. Nishiyama: Martensitic Transformation, Academic Press Inc., New York, USA, 1971, pp. 18
34. [34] A. Zare and A. Ekrami: Mater. Sci. Eng. A., 2011, vol. 528, pp. 4422-610.1016/j.msea.2011.02.021 ↗
35. [35] I. Gutierrez-Urrutia and D. Raabe: Acta. Mater., 2012, vol. 60, pp. 5791-580210.1016/j.actamat.2012.07.018 ↗
36. [36] E. Cakmak, S.C. Vogel and H. Choo: Mater. Sci. Eng. A., 2014, vol. 589, pp. 235-4110.1016/j.msea.2013.09.093 ↗
37. [37] Z.A. Iofa, V.V. Batrakov and Y.A. Nikiforova: Corros. Sci., 1968, vol. 8, pp. 573-8210.1016/S0010-938X(68)80093-9 ↗
38. [38] L. Peguet, B. Malki and B. Baroux: Corros. Sci., 2009, vol. 51, pp. 493-810.1016/j.corsci.2008.12.026 ↗
39. [39] B.I. Kolodii: Mater. Sci., 2000, vol. 36, pp. 884-9110.1023/A:1011343022972 ↗
40. [40] P.J. Manganon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577-8610.1007/BF02642003 ↗
41. R. Merello, F.J. Botana, J. Botella, M.V. Matres and M. Marcos: Corros. Sci., 2003, vol. 45, pp. 909-2110.1016/S0010-938X(02)00154-3 ↗
42. [42] H. Baba, T. Kodama and Y. Katada: Corros. Sci. 2002, vol. 44, pp. 2393-240710.1016/S0010-938X(02)00040-9 ↗
43. [43] D.W. Jiang, C.S. Ge, X.J. Zhao, J. Li, L.L. Shi and X.S. Xiao: J. Iron. Steel. Res. Int., 2012, vol. 19, pp. 50-610.1016/S1006-706X(12)60059-4 ↗
44. [44] P.C. Maxwell, A. Goldberg and J.C. Shyne: Metal. Trans. 1974, vol. 5, pp. 1305-2410.1007/BF02646613 ↗
45. [45] B.R. Kumar, R. Singh, B. Mahato, P.K. De, N.R. Bandyopadhyay and D.K. Bhattacharya: Mater. Charact., 2005, vol. 54, pp. 141-710.1016/j.matchar.2004.11.004 ↗
46. [46] S.M. Alvarez, A. Bautista and F. Velasco: Corros. Sci. 2013, vol. 69, pp. 130-810.1016/j.corsci.2012.11.033 ↗