journal article·2014-03

Acceleration or Suppression of α-Phase Precipitation Using Isothermal ω Phase in Ti-20 at.pct Nb Alloy

Sengo Kobayashi, Tomohiro Takeichi, Kiyomichi Nakai, Tatsuaki Sakamoto

Publisher page

Abstract

Homogeneous precipitation of a fine α phase in the β matrix of Ti alloys is a promising method for obtaining a highly strengthened Ti-based alloy. Isothermal ω particles are known to be the nucleation sites for fine α-phase precipitation, but an understanding of the kinetics of α-phase formation on isothermal ω particles is still lacking. This study aimed to reveal the effect of isothermal ω particles on α-phase precipitation onset time. Two-step isothermal aging of a Ti-20 at.pct Nb alloy after solid solution treatment at 1273 K (1000 °C) was carried out. The first step of the aging at 633 K (360 °C) involved the formation of isothermal ω particles in the β matrix. This was followed by a second aging step at 673 K, 723 K, and 773 K (400 °C, 450 °C, and 500 °C) for α-phase precipitation. Suppression of α-phase nucleation on the isothermal ω particles occurred at 673 K (400 °C), whereas acceleration of α-phase nucleation on the isothermal ω particles was observed at 723 K and 773 K (450 °C and 500 °C). Thermodynamic stability of the isothermal ω particles and solute partitioning were controlling factors for the α-phase precipitation kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. E.W. Collings: Physical Metallurgy of Titanium Alloys, 1984, ASM International, Metals Park, OH, pp. 111-62.
2. R.R. Boyer and R.D. Briggs: J. Mater. Eng. Perform., 2005, vol. 14, pp. 681-85.10.1361/105994905X75448 ↗
3. S.L. Nyakan, J.C. Fanning, and R.R. Boyer: J. Mater. Eng. Perform., 2005, vol. 14, pp. 799-811.10.1361/105994905X75646 ↗
4. M. Niinomi: Sci. Technol. Adv. Mater., 2003, vol. 4, pp. 445-54.10.1016/j.stam.2003.09.002 ↗
5. N. Niwa, A. Arai, H. Takatori, and K. Ito: ISIJ Int., 1991, vol. 31, pp. 856-62.10.2355/isijinternational.31.856 ↗
6. M. Okada and T. Nishikawa: J. Jpn. Inst. Metals, 1986, vol. 50, pp. 555-62.10.2320/jinstmet1952.50.6_555 ↗
7. T. Furuhara: Metals Mater., 2000, vol. 6, pp. 221-24.10.1007/BF03028215 ↗
8. M. Gunji, K. Kitano, N. Niwa, and K. Ito: Tetsu-to-Hagane, 1986, vol. 72, pp. 610-16.10.2355/tetsutohagane1955.72.6_610 ↗
9. T. Inaba, K. Ameyama, and M. Tokizane: ISIJ Int., 1991, vol. 31, pp. 792-98.10.2355/isijinternational.31.792 ↗
10. M. Niinomi and T. Kobayashi: ISIJ Int., 1991, vol. 31, pp. 848-55.10.2355/isijinternational.31.848 ↗
11. Y. Kawabe and S. Muneki: ISIJ Int., 1991, vol. 31, pp. 785-91.10.2355/isijinternational.31.785 ↗
12. E. Sukedai, H. Yagi, D. Yoshimitsu, H. Matsumoto, T. Ando, W.F. Xu, and H. Hashimoto: Ultramicroscopy, 2004, vol. 98, pp. 209-18.10.1016/j.ultramic.2003.08.014 ↗
13. H. Nishizawa, E. Sukedai, W. Liu, and H. Hashimoto: Mater. Trans. JIM, 1998, vol. 39, pp. 609-12.10.2320/matertrans1989.39.609 ↗
14. Y. Takemoto, M. Hida, and A. Sakakibara: J. Japan Inst. Metals, 1993, vol. 57, pp. 261-67.10.2320/jinstmet1952.57.3_261 ↗
15. S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, and H.L. Fraser: Acta Mater., 2009, vol. 57, pp. 2136-47.10.1016/j.actamat.2009.01.007 ↗
16. T.W. Duerig and J.C. Williams: Proceedings of the Symposium, Atlanta, GA, 1984, pp. 19–67.
17. J.A. Feeney and M.J. Blackburn: Metall. Trans., 1970, vol. 1, pp. 3309-23.10.1007/BF02642025 ↗
18. T.W. Duerig, G.T. Terlinde, and J.C. Williams: Metall. Trans. A, 1980, vol. 11A, pp. 1987-98.10.1007/BF02655118 ↗
19. F. Prima, P. Vermaut, G. Texier, D. Ansel, and T. Gloriant: Scripta Mater., 2006, vol. 54, pp. 645-48.10.1016/j.scriptamat.2005.10.024 ↗
20. T. Furuhara, T. Maki, and T. Makino: J. Mater. Proc. Technol., 2001, vol. 117, pp. 318-23.10.1016/S0924-0136(01)00790-7 ↗
21. J.L. Murray: Phase Diagrams of Binary Titanium Alloys, J.L. Murray, (ed.), ASM International, Metals Park, OH, 1987, pp. 188–94.
22. M.J. Blackburn and J.C. Williams: Trans. TMS-AIME, 1968, vol. 242, pp. 2461-69.
23. A. R. G. Brown, D. Clark, J. Eastabrook, K. S. Jepson: Nature, 1964, vol. 201, pp. 914–5.10.1038/201914a0 ↗