journal article·2013-03

Environmental Crack Growth Behavior Affected by Thickness/Geometry Constraint

Daniel Kujawski

Publisher page

Abstract

This article gives a short review on the effects of thickness/constraint and environment on crack growth behavior under cyclic and static loadings. Fatigue crack growth data taken from the literature, corresponding to different environments, ranging from vacuum to air and NaCl solution for a number of alloys and different specimens geometries are presented and analyzed. Reported results indicate that for relatively inert material/environment systems, there is a weak thickness/constraint effect on fatigue crack growth behavior. On the other hand, for corrosive material/environment systems, there is a significant thickness/constraint effect on crack growth rate behavior under both cyclic and static loadings. Some implications related to crack growth modeling are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, 1998.
2. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie and B. Karihaloo, Editors-in-Chief, J. Petit and P. Scott, Volume Editors, vol. 6, Elsevier Science, New York, 2004, pp. 849–64.
3. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 2005, 3rd ed., CRC Taylor & Francis.10.1201/9781420058215 ↗
4. J.C. Newman Jr.: Progress in Aerospace Sciences, 1998, vol. 34, pp. 347–90.10.1016/S0376-0421(98)00006-2 ↗
5. J.C. Newman Jr.: NASA TM 104159, February 1992.
6. S.G. Larsson and A.J. Carlsson: J. Mech. Phys. Solids, 1973, vol. 21, pp. 263–77.10.1016/0022-5096(73)90024-0 ↗
7. J.R. Rice: J. Mech. Phys. Solids, 1974, vol. 22, pp 17–26.10.1016/0022-5096(74)90010-6 ↗
8. B.A Bilby, G.E. Cardiew, M.R. Goldthorpe, and I.C. Howard: in Size Effects in Fracture, Mechanical Engineering Publications Limited, London, 1986, pp. 37–46.
9. C. Bertegon and J. W. Hancock: J. Appl. Mech., 1991, vol. 113, pp. 104–10.10.1115/1.2897135 ↗
10. G. Harlin and J.R. Willis: Proc. R. Soc London, 1988, vol. A415, pp. 197–226.
11. P.S. Leevers and J.C. Randon: Int. J. Fract., 1983, vol. 19, pp. 311–25.10.1007/BF00012486 ↗
12. N.P.O’Dowd and C.F. Shih: J. Mech. Phys. Solids., 1991, vol. 39, pp. 989–1015.10.1016/0022-5096(91)90049-T ↗
13. J. Tong: Eng. Fract. Mech., 2002, vol. 69, pp. 1325–37.10.1016/S0013-7944(02)00002-4 ↗
14. R.S. Vecchio, J.S. Crompton, and R.W. Hertzberg: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10, pp. 333–42.10.1111/j.1460-2695.1987.tb00211.x ↗
15. P. Hutar, S. Seitl, and Z. Knesl: Computat. Mater. Sci., 2006, vol. 37, pp. 51–57.10.1016/j.commatsci.2005.12.025 ↗
16. S. Taira and K. Tanaka: Eng, Fract. Mech., 1979, vol. 11, pp. 231–49.10.1016/0013-7944(79)90001-8 ↗
17. Y. Hirose and K. Tanaka: Soc. Mater. Sci, Jpn, 1980, vol. 29, pp. 58–64.
18. C.M. Carman and J.M. Katlin: Trans. ASME, 1966, vol. 88D, pp. 792–800.10.1115/1.3645962 ↗
19. A.R. Jack and A.T. Price: Acta Metall., 1972, vol. 20, pp. 857–66.10.1016/0001-6160(72)90078-8 ↗
20. N.E. Frost and K. Denton: J. Mech. Eng. Sci., 1961, vol. 3, pp. 295–98.10.1243/JMES_JOUR_1961_003_039_02 ↗
21. K. Endo, K. Komai, and I. Yamamoto: Bull. JSME, 1981, vol. 24, pp. 1326–32.10.1299/jsme1958.24.1326 ↗
22. J.R. Griffiths and C.E. Richards: Mater. Sci. Eng., 1973, vol. 11, pp. 305–10.10.1016/0025-5416(73)90120-1 ↗
23. H.R. Shercliff and N. A. Fleck: Fatigue Fract. Engng. Mater. Struct., 1990, vol. 13, pp. 287–96.10.1111/j.1460-2695.1990.tb00600.x ↗
24. A.J. Brothers, S. Yukawa: J. Basic Eng., 1967, vol. 89D, pp. 19–27.10.1115/1.3609552 ↗
25. I. Varfolomeev, M. Luke, and M. Burdack: Eng. Fract. Mech., 2011, vol. 78, pp. 742–53.10.1016/j.engfracmech.2010.11.011 ↗
26. K.N. Smith, P. Watson, and T. H. Topper: J. Mater., 1970, vol. 5, pp. 767–78.
27. S.J. Hudak, J.H. Feiger, and J.A. Patton: Proc. of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering, June 6–11, 2010, pp. 141–50.10.1115/OMAE2010-20705 ↗
28. B. Holper, H.Mayer, A.K. Vasudevan, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 397–411.10.1016/S0142-1123(02)00163-9 ↗
29. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 405–414.10.1007/s11661-010-0471-4 ↗
30. E.U. Lee, G.Glinka, A.K. Vasudevan, N. Iyyer, and N.D. Than: Int. J. Fatigue, 2009, vol. 31, pp. 1858–64.10.1016/j.ijfatigue.2008.11.013 ↗
31. K. Sadananda and A.K. Vasudevan: in Fracture Mechanics, ASTM STP 1220, Erdogan F, ed. 1993, vol. 25, pp. 484–501.
32. S. Stoychev and D. Kujawski: Int. J. Fatigue, 2005, vol. 27, pp. 1425–31.10.1016/j.ijfatigue.2005.06.038 ↗
33. S. Mikheevsky and G. Glinka: Int. J. Fatigue, 2009, vol. 31, pp. 1828–36.10.1016/j.ijfatigue.2009.02.035 ↗
34. D. Kujawski and K. Sadananda: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 377–82.10.1007/s11661-010-0373-5 ↗
35. M. Creager and P.C. Paris: Int. J. Fract., 1967, vol. 3, pp. 247–52.10.1007/BF00182890 ↗
36. H. Neuber: J. Appl. Mech., 1961, vol. 28, pp. 544–50.10.1115/1.3641780 ↗
37. R.M. McMeeking and D.M. Parks: ASTM STP 668, American Society for Testing and Materials, Philadelphia, 1979, pp. 175–94.