journal article·2014-04

Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study

Elena Bernardo, Raquel de Oro, Mónica Campos, José Manuel Torralba

Publisher page

Abstract

The possibility of tailoring the characteristics of a liquid metal is an important asset in a wide number of processing techniques. For most of these processes, the nature and degree of the interaction between liquid and solid phases are usually a focus of interest since they determine liquid properties such as wettability and infiltration capacity. Particularly, within the powder metallurgy (PM) technology, it is considered one of the key aspects to obtain high performance steels through liquid phase sintering. In this work, it is proved how thermodynamic and kinetics software is a powerful tool to study the liquid/solid interactions. The assessment of different liquid phase promoters for transient liquid phase sintering is addressed through the use of ThermoCalc and DICTRA calculations. Besides melting temperatures, particular attention is given to the solubility phenomena between the phases and the kinetics of these processes. Experimental validation of thermodynamic results is carried out by wetting and infiltration experiments at high temperatures. Compositions presenting different liquid/solid solubility are evaluated and directly correlated to the behavior of the liquid during a real sintering process. Therefore, this work opens the possibility to optimize liquid phase compositions and predict the liquid behavior from the design step, which is considered of high technological value for the PM industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. H. Borgstrom and L. Nyborg: Journal of Iron and Steel Research International, 2007. 14: p. 70-76.10.1016/S1006-706X(08)60054-0 ↗
2. F. Castro, M. Sarasola, S. Sainz, and T. Gomez-Acebo: Prog. Powder Metall., 2007, vol. 534-536, pp. 705-708.
3. H. Danninger and C. Gierl: Materials Chemistry and Physics, 2001. 67(1-3): p. 49-55.10.1016/S0254-0584(00)00419-3 ↗
4. R.M. German, P. Suri and S.J. Park: Journal of Materials Science, 2009. 44(1): p. 1-39.10.1007/s10853-008-3008-0 ↗
5. B.A. James: Powder Metallurgy, 1985. 28(3): p. 121-130.10.1179/pom.1985.28.3.121 ↗
6. S.J. Jamil and G.A. Chadwick: Powder Metallurgy, 1985. 28(2): p. 65-71.10.1179/pom.1985.28.2.65 ↗
7. R. Oro, M. Campos, J.M. Torralba and C. Capdevila: Powder Metallurgy, 2012. 55(4): p. 294-301.10.1179/1743290112Y.0000000016 ↗
8. A.P. Savitskii: Science of Sintering, 2005. 37(1): p. 3-17.10.2298/SOS0501003S ↗
9. P.E. Zovas: Journal of Metals, 1983. 35(1): p. 28-33.
10. W.J. Huppmann and W.A. Kaysser: Journal of Metals, 1982. 35(12): p. A64.
11. J.X. Liu and R.M. German: Metall. Mater. Trans. A, 2001. 32A(12): pp. 3125-3131.10.1007/s11661-001-0187-6 ↗
12. W.J. Huppmann, H. Riegger and G. Petzow: Science of Sintering, 1978. 10(1): p. 45-52.
13. N.Dautzenberg and H.J. Dorweiler: Powder Metallurgy International, 1985. 17(6): p. 279-282.
14. H. Danninger: Powder Metallurgy International, 1987. 19(1): p. 19-23.
15. Danninger, H., Homogenization and pore formation during sintering with transient liquid-phase. Powder Metallurgy International, 1988. 20(1): p. 21-25.
16. E. Bernardo, R. Oro, M.Campos, R. Frykholm, O. Litström, and J.M. Torralba: in Euro PM2012, EPMA, Basel, Switzerland, 6–19 September, 2012, CD, ISBN: 978-1-1899072-31-11.
17. T. Gomez-Acebo, M. Sarasola and F. Castro: Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 2003. 27(3): p. 325-334.10.1016/j.calphad.2003.12.001 ↗
18. S. Mocarski, D.W. Hall, R.A. Chernenkoff, D.A. Yeager and C. O.McHugh: Powder Metallurgy, 1996. 39(2): p. 130-137.10.1179/pom.1996.39.2.130 ↗
19. R. Oro, M. Campos and J.M. Torralba: Powder Metallurgy, 2012. 55(3): p. 180-190.10.1179/1743290111Y.0000000007 ↗
20. A. Veiga and F. Castro: in Powder Metallurgy World Congress & Exhibition, EPMA, Yokohama, Japan, 14–18 October, 2012, CD, ISBN:978-4-9900214-9-8
21. Z. Xiu, A. Salwen, X. Qin, F. He and X. Sun: Powder Metallurgy, 2003. 46(2): p. 171-174.10.1179/003258903225005411 ↗
22. N. Eustathopoulus, M.G. Nicolas, and B. Drevet, Wettability at High Temperatures, Pergamon Materials Series, vol. 3, Pergamon, New York, 1999.
23. O. Kozlova, R. Voytovych, M.F. Devismes, and N. Eustathopoulos: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2008. 495(1-2): p. 96-101.10.1016/j.msea.2007.10.101 ↗
24. G.W. Liu, F. Valenza, M.L. Muolo, G.J. Qiao and A. Passerone: Journal of Materials Science, 2009. 44(22): p. 5990-5997.10.1007/s10853-009-3858-0 ↗
25. L. Yin, B.T. Murray, S. Su, Y. Sun, Y. Efraim, H. Taitelbaum, and T.J. Singler: J. Phys, 2009, vol. 21 (46), p. 464130.10.1088/0953-8984/21/46/464130 ↗
26. P. Protsenko, O. Kozova, R. Voytovych and N. Eustathopoulos: Journal of Materials Science, 2008. 43(16): p. 5669-5671.10.1007/s10853-008-2814-8 ↗
27. R. Oro, E. Bernardo, M. Campos, and J.M. Torralba: in EuroPM 2011, EPMA, Barcelona, Spain, 9–12 October, 2011, CD, ISBN: 978-1-899072-23-1.
28. F. Castro,M. Sarasola, F. Baumgaertner, M. Dougan, S. Mitchell, K. Lipp, H.J. Bender, C. Coffin, and J. Dunkley: in EuroPM 2005, EPMA, Praghe, Czech Republic, 2–5 October 2005, ISBN: 11899072-18-7.