Fabrication of Dense ZrO2/CNT Composites: Influence of Bead-Milling Treatment
Source abstract
Abstract
Highly concentrated zirconia-carbon nanotube (CNT) water suspensions were prepared using an advanced milling technique. The bead-milling operation parameters were optimized for this system and used to prepare zirconia-stabilized water-based suspensions with different CNT contents. The effects of different milling conditions were studied. The particle dispersion was evaluated by SEM observations on dried suspension. Green’s density and SEM observations of compacts were used to follow the colloidal dispersability of the composites. Materials of tetragonal zirconia and CNTs were prepared with a high concentration of CNTs (1, 5, and 10 wt pct CNT). The homogeneous dispersion and distribution of the fibers in the bulk material after slip casting of the suspension were examined. The samples were sintered using spark plasma sintering (SPS) at 1473 K (1200 °C) and finally, fully dense materials were obtained. The mechanical properties were evaluated using the Vickers indentation technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. T.V. Hughes and C.R. Chambers: Patent 405480, USA, 1889.
2. P. Schutzenberger, L. Schutzenberger, Russ. Acad. Sci. 111 (1890) 774-80.
3. L.V. Radushkevich, V.M. Lukyanovich, Zh. Fiz. Khim. 26 (1952) 88-95.
4. S. Iijima, Nature 354 (1991) 56-58.10.1038/354056a0 ↗
5. A. Hirvonen, R. Nowak, Y. Yamamoto, T. Sekino, K. Niihara, J. Eur. Ceram. Soc. 26 (2006) 1497-1505.10.1016/j.jeurceramsoc.2005.03.232 ↗
6. A. Duszova, J. Dusza, K. Tomasek, G. Blugan, J. Kuebler, J. Eur. Ceram. Soc. 28 (2008) 1023-27.10.1016/j.jeurceramsoc.2007.09.011 ↗
7. W.A. Curtin, B.W. Sheldon, Mater. Today 7 (2004) 44-49.10.1016/S1369-7021(04)00508-5 ↗
8. A. Duszova, J. Dusza, K. Tomasek, J. Morgiel, G. Blugan, and J. Kuebler, Scripta Mater. 58 (2008) 520-23.10.1016/j.scriptamat.2007.11.002 ↗
9. J. Tatami, T. Katashima, K. Komeya, T. Meguro, T. Wakihara, J. Am. Ceram. Soc. 88 (2005) 2889-93.10.1111/j.1551-2916.2005.00539.x ↗
10. J. Wang, H. Kou, X. Liu, Y. Pan, J. Guo, Ceram. Int. 33 (2007) 719-22.10.1016/j.ceramint.2005.12.009 ↗
11. G.D. Zhan, J.D. Kuntz, J. Wan, A.K. Mukherjee, Nat. Mater. 2 (2003) 38-42.10.1038/nmat793 ↗
12. A. Datye, K.H. Wu, G. Gomes, V. Monroy, H.T. Lin, J. Vleugels, K. Vanmeensel, Compos. Sci. Technol. 70 (2010) 2086-92.10.1016/j.compscitech.2010.08.005 ↗
13. N. Garmendia, I. Santacruz, R. Moreno, I. Obieta, J. Mater. Sci. Mater. Med. 21 (2010) 1445-51.10.1007/s10856-010-4023-7 ↗
14. M. Mazaheri, D. Mari, R. Schaller, G. Bonnefont, G. Fantozzi, J. Eur. Ceram. Soc. 31 (2011) 2691-98.10.1016/j.jeurceramsoc.2010.11.009 ↗
15. N. Garmendia, S. Grandjean, J. Chevalier, L.A. Diaz, R. Torrecillas, I. Obieta, J. Eur. Ceram. Soc. 31 (2011) 1009-1014.10.1016/j.jeurceramsoc.2010.12.029 ↗
16. M. Mazaheri, D. Mari, Z.R. Hesabi, R. Schaller, G. Fantozzi, Compos. Sci. Technol. 71 (2011) 939-45.10.1016/j.compscitech.2011.01.017 ↗
17. J. Sun, L. Gao, M. Iwasa, T. Nakayama, K. Niihara, Ceram. Int. 31 (2005) 1131-34.10.1016/j.ceramint.2004.11.010 ↗
18. J. Sun, L. Gao, W. Li, Chem. Mater. 14 (2002) 5169-72.10.1021/cm020736q ↗
19. M. Omastova, M. Mikusik, P. Fedorko, M.M. Chehimi, and J. Pionteck, Mater. Sci. Forum 636-637 (2009) 676-81.
20. A. Peigney, C. Laurent, E. Flahaut, A. Rousset, Ceram. Int. 26 (2000) 677-83.10.1016/S0272-8842(00)00004-3 ↗
21. A. Peigney, C. Laurent, A. Rousset, Key Eng. Mater. 136 (1997) 743-46.10.4028/www.scientific.net/KEM.132-136.743 ↗
22. H. Chen, H. Muthuraman, P. Stokes, J. Zou, X. Liu, J. Wang, Q. Huo, S.I. Khondaker, L. Zhai, Nanotechnology 18 (2007) 415606.10.1088/0957-4484/18/41/415606 ↗
23. M. Estili, K. Takagi, A. Kawasaki, Scripta Mater. 59 (2008) 703-05.10.1016/j.scriptamat.2008.05.042 ↗
24. R.K. Chintapalli, F. García Marro, B. Milsom, M. Reece, and M. Anglada, Mater. Sci. Eng. A 549 (2010) 50-59.10.1016/j.msea.2012.03.115 ↗
25. M. Mazaheri, D. Mari, R. Schaller, G. Fantozzi. Solid State Phenom. 184 (2011) 265-70.10.4028/www.scientific.net/SSP.184.265 ↗
26. B.-K. Jang, Y. Sakka, Mater. Lett. 63 (2009) 2545-47.10.1016/j.matlet.2009.08.060 ↗
27. B.-K. Jang, Y. Sakka, Mater. Trans. 51 (2010) 192-95.10.2320/matertrans.M2009273 ↗
28. G. Suárez, M.P. Albano, L.B. Garrido, E.F. Aglietti, Ceram. Int. 33 (2007) 925-29.10.1016/j.ceramint.2006.02.003 ↗
29. G. Suárez, Y. Sakka, T.S. Suzuki, T. Uchikoshi, E.F. Aglietti, J. Ceram. Soc. Jpn. 117 (2009) 470-74.10.2109/jcersj2.117.470 ↗
30. G. Suarez, Y. Sakka, T.S. Suzuki, T. Uchikoshi, X. Zhu, E.F. Aglietti, Sci. Technol. Adv. Mater. 10 (2009) 025004.10.1088/1468-6996/10/2/025004 ↗
31. Y. Sakka, T.S. Suzuki, T. Uchikoshi, J. Eur. Ceram. Soc. 28 (2008) 935-42.10.1016/j.jeurceramsoc.2007.09.039 ↗
32. S. Grasso, Y. Sakka, G. Maizza, Sci. Technol. Adv. Mater. 10 (2009) 053001.10.1088/1468-6996/10/5/053001 ↗
33. T.S. Suzuki, Y. Sakka, K. Nakano, K. Hiraga, J. Am. Ceram. Soc. 84 (2001) 2132–34.10.1111/j.1151-2916.2001.tb00973.x ↗
34. D.K. Shetty, I.G. Wright, P.N. Mincer, A.H. Clauser, J. Mater. Sci. 20 (1985) 873-82.10.1007/BF00555296 ↗
35. G. Suárez, Y. Sakka, T. Suzuki, T. Uchikoshi, E.F. Aglietti, Mater. Res. Bull. 44 (2009) 1802-05.10.1016/j.materresbull.2009.03.003 ↗
36. G. Suárez, H. Borodianska, Y. Sakka, E.F. Aglietti, O. Vasylkiv, J. Nanosci. Nanotechnol. 10 (2010) 6634-40.10.1166/jnn.2010.2645 ↗
37. B. Basu, J.H. Lee, D.Y. Kim, J. Am. Ceram. Soc. 87 (2004) 1771-74.10.1111/j.1551-2916.2004.01771.x ↗
38. G. Bernard-Granger, C. Guizard, Acta Mater. 55 (2007) 3493-3504.10.1016/j.actamat.2007.01.048 ↗
39. G. Bernard-Granger, C. Guizard, S. Surblic, G. Baldinozzi, and A. Addad, Acta Mater. 56 (2008) 4658-72.10.1016/j.actamat.2008.05.031 ↗
40. W. Li, L. Gao, J. Eur. Ceram. Soc. 20 (2000) 2441-45.10.1016/S0955-2219(00)00152-7 ↗