In-Situ Response of WC-Ni Composites under Compressive Load
Source abstract
Abstract
The in-situ strain response of WC-Ni cemented carbides (5, 10, and 20 wt pct Ni) to uniaxial compressive load was measured using neutron diffraction. Strain was measured in both phases parallel and transverse to the loading axis of cylindrical samples. Plasticity is observed in the Ni binder from the lowest levels of applied load. The plasticity occurs locally in the Ni phase, on the scale of the microstructure, and leads to continuous curvature of the WC-Ni stress-strain curves and significant toughness of the material. The plasticity results from the interaction of the thermal residual microstresses created during sample production with the applied macrostress. It also leads to anisotropic relaxation of the initial residual stress and the creation of a residual stress state with cylindrical symmetry in the material. This process was observed over three load-unload cycles. Analysis enables phase-specific stress strain curves to be constructed. Finally, strain distributions were observed through peak breadth responses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. G.S. Upadhyaya: Cemented Tungsten Carbides: Production, Properties, and Testing, Noyes Publications, Westwood, NJ, 1998
2. H.E. Exner, J. Gurland: Powder Metall., 1970, vol. 13, pp. 13–3110.1179/pom.1970.13.25.002 ↗
3. J.L. Chermant, F. Osterstock: J. Mater. Sci., 1976, vol. 11, pp. 1939–5710.1007/BF00708272 ↗
4. H.E. Exner: Int. Met. Rev., 1979, vol. 24, pp. 149–7310.1179/095066079790136363 ↗
5. L.S. Sigl, H.E. Exner: Metall. Trans. A, 1987, vol. 18A, pp. 1299–30810.1007/BF02647199 ↗
6. B. Roebuck, E.A. Almond: Int. Met. Rev., 1988, vol. 33, pp. 90–11010.1179/imr.1988.33.1.90 ↗
7. J. Gurland: Int. Met. Rev., 1988, vol. 33, pp. 151–6610.1179/imr.1988.33.1.151 ↗
8. L.S. Sigl, F.F. Fischmeister: Acta Metall., 1988, vol. 36, pp. 887–9710.1016/0001-6160(88)90143-5 ↗
9. K.S. Ravichandran: Acta Metall. Mater., 1994, vol. 42, pp. 143–5010.1016/0956-7151(94)90057-4 ↗
10. V. Livescu, B. Clausen, J.W. Paggett, A.D. Krawitz, E.F. Drake, M.A.M. Bourke: Mater. Sci. Eng., 2005, vol. A399, pp. 134–4010.1016/j.msea.2005.02.024 ↗
11. A.D. Krawitz, D.G. Reichel, R.L. Hitterman: Mater. Sci. Eng., 1989, vol. A119, pp. 127–3410.1016/0921-5093(89)90531-5 ↗
12. A.D. Krawitz, M.L. Crapenhoft, D.G. Reichel, R. Warren: Mater. Sci. Eng., 1988, vols. A105–A106, pp. 275–8110.1016/0025-5416(88)90507-1 ↗
13. A.D. Krawitz, R. Roberts, and J. Faber: in Science of Hard Materials, Institute of Physics Conf. Series No. 75, Adam Hilger Ltd., 1984, pp. 577–89
14. K. Seol, A.D. Krawitz, J.W. Richardson, C.M. Weisbrook: Mater. Sci. Eng., 2005, vol. A398, pp. 15–2110.1016/j.msea.2005.01.041 ↗
15. C.M. Weisbrook, A.D. Krawitz: Mater. Sci. Eng., 1996, vol. A209, pp. 318–2810.1016/0921-5093(95)10107-1 ↗
16. M.A.M. Bourke, D. Dunand, E. Ustundag: Appl. Phys. A (Mater. Sci. Process.), 2002, vol. A74, p. S170710.1007/s003390201747 ↗
17. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, part 2, pp. 65–7110.1107/S0021889869006558 ↗
18. D.A. Witte, A.D. Krawitz, R.A. Winholtz, R.R. Berliner, M. Popovici: J. Neutron Res., 1998, vol. 6, pp. 217–3210.1080/10238169808200037 ↗
19. K. Seol, A.D. Krawitz: Mater. Sci. Eng., 1990, vol. A127, pp. 1–510.1016/0921-5093(90)90183-4 ↗
20. I.C. Noyan, J.B. Cohen: Residual Stress; Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987
21. A.D. Krawitz: Introduction to Diffraction in Materials Science and Engineering, John Wiley and Sons, New York, NY, 2001
22. T. Gnäupel-Herold, P.C. Brand, H.J. Prask: J. Appl. Cryst., 1998, vol. 31, pp. 929–3510.1107/S002188989800898X ↗
23. G. Simmons, H. Wang: Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, 2nd ed., MIT Press, Cambridge, MA, 1971
24. D.L. Coats, A.D. Krawitz: Mater. Sci. Eng., 2003, vol. A359, pp. 338–4210.1016/S0921-5093(03)00379-4 ↗
25. T. Christman, A. Needleman, S. Suresh: Acta Metall., 1989, vol. 37, pp. 3029–5010.1016/0001-6160(89)90339-8 ↗
26. D.C. Drucker: J. Mater., 1966, vol. 1, p. 873.10.1136/bmj.1.5492.873 ↗
27. R.P. Felgar, J.D. Lubahn: Proc. ASTM, 1957, vol. 57, pp. 770–88
28. B.O. Jaensson: Mater. Sci. Eng., 1972, vol. 9, pp. 339–4610.1016/0025-5416(72)90052-3 ↗
29. E.F. Drake, A.D. Krawitz: Metall. Trans. A, 1981, vol. 12A, pp. 505–1310.1007/BF02648549 ↗
30. D.H. Carter, M.A.M. Bourke: Acta Metall., 2000, vol. 48, pp. 2885–2900
31. A.D. Krawitz, R.A. Winholtz, C.M. Weisbrook: Mater. Sci. Eng., 1996, vol. A206, pp. 176–8210.1016/0921-5093(95)10018-0 ↗
32. K. Cho, J. Gurland: Metall. Trans. A, 1988, vol. 19A, pp. 2027–4010.1007/BF02645206 ↗