journal article·2012-11

Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel

Jeffrey D. Farren, Allen H. Hunter, John N. Dupont, David N. Seidman, Charles V. Robino, Ernst Kozeschnik

Publisher page

Abstract

NUCu-140 is a copper-precipitation-strengthened steel that exhibits excellent mechanical properties with a relatively simple chemical composition and processing schedule. As a result, NUCu-140 is a candidate material for use in many naval and structural applications. Before NUCu-140 can be implemented as a replacement for currently used materials, the weldability of this material must be determined under a wide range of welding conditions. This research represents an initial step toward understanding the microstructural and mechanical property evolution that occurs during fusion welding of NUCu-140. Microhardness traverses and tensile testing using digital image correlation show local softening in the heat-affected zone (HAZ). Microstructural characterization using light optical microscopy (LOM) revealed very few differences in the softened regions compared with the base metal. Local-electrode atom-probe (LEAP) tomography demonstrates that local softening occurs as a result of dissolution of the Cu-rich precipitates. MatCalc kinetic simulations (Vienna, Austria) were combined with welding heat-flow calculations to model the precipitate evolution within the HAZ. Reasonably good agreement was obtained between the measured and calculated precipitate radii, number density, and volume fraction of the Cu-rich precipitates in the weld. These results were used with a precipitate-strengthening model to understand strength variations within the HAZ.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. D. Isheim and D.N. Seidman: Surf. Interface Anal., 2004, vol. 36, pp. 569–74.10.1002/sia.1703 ↗
2. D. Isheim, M.S. Gagliano, M.E. Fine, and D.N. Seidman: Acta Mater., 2006, vol. 54, pp. 841–49.10.1016/j.actamat.2005.10.023 ↗
3. R.P. Kolli and D.N. Seidman: Microsc. Microanal., 2007, vol. 13, pp. 272–84.10.1017/S1431927607070675 ↗
4. M.S. Gagliano and M.E. Fine: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2323–29.10.1007/s11661-006-0212-x ↗
5. D. Isheim, R.P. Kolli, M.E. Fine, and D.N. Seidman: Scripta Mater., 2006, vol. 55, pp. 35–40.10.1016/j.scriptamat.2006.02.040 ↗
6. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073–88.10.1016/j.actamat.2007.12.044 ↗
7. R.P. Kolli, R.M. Wojes, S. Zaucha, and D.N. Seidman: Int. J. Mater. Res., 2008, vol. 99, pp. 513–27.10.3139/146.101662 ↗
8. R.P. Kolli and D.N. Seidman: Int. J. Mater. Res., 2011, vol. 9, pp. 1115–24.10.3139/146.110571 ↗
9. M.E. Fine, R. Ramanathan, S. Vaynman, and S.P. Bhat: Int. Symp. on Low Carbon Steels for the 90s, 1993, pp. 511–14.
10. H.R. Castner and C.L. Null: Welding Res., Miami, FL, 1998, pp. 223–31.
11. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman, and M.E. Fine: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 363–73.10.1007/s11661-007-9417-x ↗
12. R.C. Glenn and E. Hornbogen: Trans. TMS-AIME, 1960, vol. 218, pp. 1064–70.
13. E. Hornbogen: Acta Metall., 1962, vol. 10, pp. 525–33.10.1016/0001-6160(62)90197-9 ↗
14. E. Hornbogen: Acta Metall., 1962, vol. 10, pp. 1187–89.10.1016/0001-6160(62)90174-8 ↗
15. G.M. Worrall, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107–14.10.1016/0022-3115(87)90525-3 ↗
16. G.M. Speich and R.A. Oriani: Trans. TMS-AIME, 1965, vol. 233, pp. 623–31.
17. P.J. Othen, M.L. Jenkins, and G.W. Smith: Philos. Mag. A, 1994, vol. 70, pp. 1–24.10.1080/01418619408242533 ↗
18. S. Lozano-Perez, M.L. Jenkins, and J.M. Titchmarsh: Philos. Mag. Lett., 2006, vol. 86, pp. 367–74.10.1080/09500830600815365 ↗
19. H.R. Habibi-Bajguirani and M.L. Jenkins: Philos. Mag. Lett., 1996, vol. 73, pp. 155–62.10.1080/095008396180786 ↗
20. P.J. Othen, M.L. Jenkins, G.W. Smith, and W.J. Phythian: Philos. Mag. A, 1991, vol. 64, pp. 383–91.
21. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2363–69.10.1007/BF02669376 ↗
22. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2371–78.10.1007/BF02669377 ↗
23. A. Cerezo, C.R.M. Grovenor, M.G. Hetherington, W. Sha, B.A. Shollock, and G.D.W. Smith: Mater. Charact., 1990, vol. 25, pp. 143–56.10.1016/1044-5803(90)90026-G ↗
24. S.K. Lahiri, D. Chandra, L.H. Schwartz, and M.E. Fine: Trans. TMS-AIME, 1969, vol. 245, pp. 1865–68.
25. M.A. Sokolov, S. Spooner, G.R. Odette, B.D. Wirth, and G.E. Lucas: 18th International Symposium in Effects of Radiation on Materials, M. Hamilton, ed., West Conshohocken, PA, 1999, pp. 333–45.10.1520/STP13873S ↗
26. J.T. Buswell, E.A. Little, and R.N. Sinclair: Nucl. Energ., 1998, vol. 37, pp. 387–97.
27. F. Maury, N. Lorenzelli, and C.H. Denovion: J. Nucl. Mater., 1991, vol. 37, pp. 217–20.10.1016/0022-3115(91)90491-O ↗
28. K. Osamura, H. Okuda, K. Asano, M. Furusaka, K. Kishida, and F. Kurosawa: J. de Phys. IV, 1993, vol. 3 (C8), pp. 317–20.
29. K. Osamura, H. Okuda, M. Takashima, K. Asano, and M. Furusaka: Mater. Trans., 1993, vol. 34, pp. 305–11.10.2320/matertrans1989.34.305 ↗
30. K. Osamura, H. Okuda, S. Ochiai, M. Takashima, K. Asano, M. Furusaka, K. Kishida, and F. Kurosawa: ISIJ Int., 1994, vol. 34, pp. 359–65.10.2355/isijinternational.34.359 ↗
31. F. Maury, N. Lorenzelli, C.H. Denovion, and P. Lagarde: Scripta Metall. Mater., 1991, vol. 25, pp. 1839–44.10.1016/0956-716X(91)90314-Q ↗
32. S. Pizzini, K.J. Roberts, W.J. Phythian, C.A. English, and G.N. Greaves: Philos. Mag. Lett., 1990, vol. 61, pp. 223–29.10.1080/09500839008202362 ↗
33. W.J. Phythian, A.J.E. Foreman, C.A. English, J.T. Buswell, M.G. Hetherington, K.J. Roberts, and S. Pizzini: 15th International Symposium in Effects of Radiation Materials, 1992, pp. 131–50.
34. A.B. Edwards, K.J. Roberts, S. Pizzini, and W.J. Phythian: Philos. Mag. A, 1999, vol. 79, pp. 1295–1319.10.1080/01418619908210362 ↗
35. P. Asoka-Kumar, B.D. Wirth, P.A. Sterne, R.H. Howell, and G.R. Odette: Philos. Mag. Lett., 2002, vol. 82, pp. 609–15.10.1080/0950083021000019958 ↗
36. K. Verheyen, M. Jardin, and A. Almazouzi: J. Nucl. Mater., 2006, vol. 351, pp. 209–15.10.1016/j.jnucmat.2006.02.011 ↗
37. J.J. Blackstock and G.J. Ackland: Philos. Mag. A, 2001, vol. 81, pp. 2127–48.10.1080/01418610108217139 ↗
38. T. Harry and D.J. Bacon: Acta Mater., 2002, vol. 50, pp. 195–208.10.1016/S1359-6454(01)00331-7 ↗
39. T. Harry and D.J. Bacon: Acta Mater., 2002, vol. 50, pp. 209–22.10.1016/S1359-6454(01)00332-9 ↗
40. J.Z. Liu, A.V.D. Walle, G. Ghosh, and M.D. Asta: Phys. Rev. B: Condens. Matter Mater. Phys., 2005, vol. 72, pp. 1–16.10.1103/PhysRevB.72.144109 ↗
41. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim, and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5596–5609.10.1016/j.actamat.2010.06.031 ↗
42. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, Elsevier, Atlanta, GA, 2006, pp. 287–306.10.1016/B978-075068084-4/50015-7 ↗
43. O.C. Hellman and D.N. Seidman: Mater. Sci. Eng. A, 2002, vol. 327, pp. 24–28.10.1016/S0921-5093(01)01885-8 ↗
44. O.C. Hellman, J.A. Vandenbroucke, J. Rusing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
45. S.S. Babu: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 267–78.10.1016/j.cossms.2004.10.001 ↗
46. S.S. Babu and H. Bhadeshia: Mater. Sci. Eng. A, 1992, vol. A156, pp. 1–9.10.1016/0921-5093(92)90410-3 ↗
47. S.S. Babu and H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, pp. 1005–20.10.1179/026708390790189605 ↗
48. S.S. Babu and S.A. David: ISIJ Int., 2002, vol. 42, pp. 1344–53.10.2355/isijinternational.42.1344 ↗
49. Sandia National Laboratories: Adv. Mater. Process., 2004, vol. 162, pp. 18–19.
50. P.W. Fuerschbach and G R. Eisler: 6th Int. Trends in Welding Res. Conf. Proc., Phoenix, AZ, 2002, pp. 15–19.
51. J.N. Dupont and A.R. Marder: Weld. J., 1995, vol. 74, pp. 406–16.
52. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, Elsevier, Atlanta, GA, 2006, pp. 155–65.10.1016/B978-075068084-4/50009-1 ↗
53. I. Holzer and E. Kozeschnik: Mater. Sci. Forum, 2010, vols. 638–642, pp. 2579–84.10.4028/www.scientific.net/MSF.638-642.2579 ↗
54. E. Kozeschnik, J. Svoboda, P. Fratzl, and F.D. Fischer: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2004, vol. 385, pp. 157–65.10.1016/j.msea.2004.06.016 ↗
55. E. Kozeschnik: Scripta Mater., 2008, vol. 59, pp. 1018–21.10.1016/j.scriptamat.2008.07.008 ↗
56. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2004, vol. 385, pp. 166–74.10.1016/j.msea.2004.06.018 ↗
57. M. Perez, F. Perrard, V. Massardier, X. Klaber, A. Deschamps, H. DeMonestrol, P. Pareige, and G. Covarel: Philos. Mag., 2005, vol. 85, pp. 2197–2210.10.1080/14786430500079645 ↗
58. M.D. Mulholland and D.N. Seidman: Acta Mater., 2011, vol. 59, pp. 1881–97.10.1016/j.actamat.2010.11.054 ↗
59. M.D. Mulholland and D.N. Seidman: Microsc. Microanal., 2011, vol. 17, no. 6, pp. 950–62.10.1017/S1431927611011895 ↗
60. M.E. Fine, J.Z. Liu, and M.D. Asta: Mater. Sci. Eng. A, 2007, vol. 463, pp. 271–74.10.1016/j.msea.2006.07.164 ↗
61. K.C. Russell and L.M. Brown: Acta Metall., 1972, vol. 20, pp. 969–74.10.1016/0001-6160(72)90091-0 ↗