Fast and Reliable Ag–Sn Transient Liquid Phase Bonding by Combining Rapid Heating with Low-Power Ultrasound
Source abstract
Abstract
Abstract Ag–Sn transient liquid phase (TLP) bonding is capable of producing joints with excellent mechanical and thermal properties, and with operation temperatures at or even above the processing temperature. However, reduction of the comparatively long processing times required to achieve high-quality joints is highly desirable. To this end, the use of fast heating and low-power ultrasonic (US) pulses for accelerated Ag–Sn TLP bonding is investigated with particular focus on defect generation and avoidance. Employing rapid heating with$$20\,{\text {K s}}-1$$, the process time can indeed be strongly reduced, yielding a high average shear strength of$$(58 \pm 22)$$MPa. The large variance of the shear strength is caused by gas entrapment and pronounced lateral squeeze-out of liquid Sn, facilitated by the suppression of$${\text{Ag}}3 {\text{Sn}}$$formation upon rapid heating. Introduction of a weak US pulse leads to enhanced$${\text{Ag}}3 {\text{Sn}}$$formation and efficient removal of entrapped gas, and thus to avoidance of large-scale bond defects, which results in an enhanced shear strength of$$(104 \pm 8)$$MPa.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. S. Cheng, C.-M. Huang, and M. Pecht: Microelectron. Reliab., 2017, vol. 75, pp. 77–95.10.1016/j.microrel.2017.06.016 ↗
2. L. Bernstein: J. Electrochem. Soc., 1966, vol. 113, p. 1282.10.1149/1.2423806 ↗
3. L. Sun, M. Chen, L. Zhang, P. He, and L. Xie: J. Alloys Compd., 2020, vol. 818, p. 152825.10.1016/j.jallcom.2019.152825 ↗
4. H. Kang, A. Sharma, and J.P. Jung: Metals, 2020, vol. 10, p. 934.10.3390/met10070934 ↗
5. W. Gale and D. Butts: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 283–300.10.1179/136217104225021724 ↗
6. N. Bosco and F. Zok: Acta Mater., 2004, vol. 52, pp. 2965–72.10.1016/j.actamat.2004.02.043 ↗
7. N. Bosco and F. Zok: Acta Mater., 2005, vol. 53, pp. 2019–27.10.1016/j.actamat.2005.01.013 ↗
8. J. Li, P. Agyakwa, and C. Johnson: Acta Mater., 2010, vol. 58, pp. 3429–43.10.1016/j.actamat.2010.02.018 ↗
9. A. Lis, M.S. Park, R. Arroyave, and C. Leinenbach: J. Alloys Compd., 2014, vol. 617, pp. 763–73.10.1016/j.jallcom.2014.08.082 ↗
10. A. Lis and C. Leinenbach: J. Electron. Mater., 2015, vol. 44, pp. 4576–88.10.1007/s11664-015-3982-3 ↗
11. H. Huebner, S. Penka, B. Barchmann, M. Eigner, W. Gruber, M. Nobis, S. Janka, G. Kristen, and M. Schneegans: Microelectron. Eng., 2006, vol. 83, pp. 2155–62.10.1016/j.mee.2006.09.026 ↗
12. H. Liu, G. Salomonsen, K. Wang, K.E. Aasmundtveit, and N. Hoivik: IEEE Trans. Compon. Packag. Manuf. Technol., 2011, vol. 1, pp. 1350–58.10.1109/TCPMT.2011.2156793 ↗
13. S. Marauska, M. Claus, T. Lisec, and B. Wagner: Microsyst. Technol., 2012, vol. 19, pp. 1119–30.10.1007/s00542-012-1708-5 ↗
14. H. Xu, T. Suni, V. Vuorinen, J. Li, H. Heikkinen, P. Monnoyer, and M. Paulasto-Kröckel: Adv. Manuf., 2013, vol. 1, pp. 226–35.10.1007/s40436-013-0035-0 ↗
15. A. Rautiainen, H. Xu, E. Österlund, J. Li, V. Vuorinen, and M. Paulasto-Kröckel: J. Electron. Mater., 2015, vol. 44, pp. 4533–48.10.1007/s11664-015-3929-8 ↗
16. J.F. Li, P.A. Agyakwa, and C.M. Johnson: J. Electron. Mater., 2014, vol. 43, pp. 983–95.10.1007/s11664-013-2971-7 ↗
17. P. Natzke, U. Grossner, J. Janczak-Rusch, and L. Jeurgens: in IEEE 5th Workshop on Wide Bandgap Power Devices and Applications (WiPDA), 2017, IEEE, Albuquerque, NM, 2017, pp. 165–70.
18. A.A. Bajwa and J. Wilde: Microelectron. Reliab., 2016, vol. 60, pp. 116–25.10.1016/j.microrel.2016.02.016 ↗
19. H. Shao, A. Wu, Y. Bao, Y. Zhao, and G. Zou: Mater. Sci. Eng. A, 2017, vol. 680, pp. 221–31.10.1016/j.msea.2016.10.092 ↗
20. T. Siewert, S. Liu, D.R. Smith, and J.C. Madeni: Database for Solder Properties with Emphasis on New Lead-free Solders: Properties of Lead-Free Solders, Release 4.0, National Institute of Standards and Technology and Colorado School of Mines, 2002.
21. K.S. Siow: J. Alloys Compd., 2012, vol. 514, pp. 6–19.10.1016/j.jallcom.2011.10.092 ↗
22. S. Sohn, D. Kim, H. Kim, and N. Kang: J. Weld. Join., 2020, vol. 38, pp. 158–65.
23. K.K. Sobol: Controlling Diffusion for Rapid Formation of Interconnects, PhD Thesis, ETH Zurich, Zürich, 2014.
24. M. Feisst, J. Kustermann, A. Schumacher, I. Spies, and J. Wilde: in 2019 42nd International Spring Seminar on Electronics Technology (ISSE), 2019, pp. 1–6.10.1109/ISSE.2019.8810295 ↗
25. A.A. Bajwa, Y.Y. Qin, R. Zeiser, and J. Wilde: in CIPS 2014
26. 8th International Conference on Integrated Power Electronics Systems, VDE, Nuremberg, Germany, 2014, pp. 1-6.
27. M. Feisst, J. Yu, and J. Wilde: in 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), IEEE, 2018.
28. A. Sharif, C.L. Gan, and Z. Chen: J. Alloys Compd., 2014, vol. 587, pp. 365–68.10.1016/j.jallcom.2013.10.204 ↗
29. Q. Guo, F. Yu, H. Chen, and M. Li: J. Mater. Sci. Mater. Electron., 2017, vol. 29, pp. 3014–24.10.1007/s10854-017-8232-4 ↗
30. H. Ji, Y. Qiao, and M. Li: Scripta Mater., 2016, vol. 110, pp. 19–23.10.1016/j.scriptamat.2015.07.036 ↗
31. H. Zhao, J. Liu, Z. Li, Y. Zhao, H. Niu, X. Song, and H. Dong: Mater. Lett., 2017, vol. 186, pp. 283–88.10.1016/j.matlet.2016.10.017 ↗
32. H. Shao, A. Wu, Y. Bao, Y. Zhao, L. Liu, and G. Zou: Ultrason. Sonochem., 2017, vol. 37, pp. 561–70.10.1016/j.ultsonch.2017.02.016 ↗
33. J. Liu, H. Zhao, Z. Li, X. Song, H. Dong, Y. Zhao, and J. Feng: J. Alloys Compd., 2017, vol. 692, pp. 552–57.10.1016/j.jallcom.2016.08.263 ↗
34. H.Y. Zhao, J.H. Liu, Z.L. Li, X.G. Song, Y.X. Zhao, H.W. Niu, H. Tian, H.J. Dong, and J.C. Feng: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 2739–49.10.1007/s11661-018-4664-6 ↗
35. M. Li, Z. Li, Y. Xiao, and C. Wang: Appl. Phys. Lett., 2013, vol. 102, p. 094104.10.1063/1.4794684 ↗
36. H. Ohtani, M. Miyashita, and K. Ishida: J. Jpn. Inst. Met., 1999, vol. 63, pp. 685–94.10.2320/jinstmet1952.63.6_685 ↗
37. W. Gierlotka, Y.-C. Huang, and S.-W. Chen: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3199–3209.10.1007/s11661-008-9671-6 ↗
38. S. Kang, P. Williams, T. McLaren, and Y. Lee: Mater. Chem. Phys., 1995, vol. 42, pp. 31–37.10.1016/0254-0584(95)80039-5 ↗
39. J. Li, X. Zhang, L. Liu, L. Deng, and L. Han: IEEE Trans. Compon. Packag. Manuf. Technol., 2012, vol. 2, pp. 521–26.10.1109/TCPMT.2012.2183601 ↗
40. H.K. Kim and K.N. Tu: Phys. Rev. B, 1996, vol. 53, pp. 16027–34.10.1103/PhysRevB.53.16027 ↗
41. K.N. Tu, F. Ku, and T.Y. Lee: J. Electron. Mater., 2001, vol. 30, pp. 1129–32.10.1007/s11664-001-0139-3 ↗
42. A. Gusak, K. Tu, and C. Chen: Scripta Mater., 2020, vol. 179, pp. 45–48.10.1016/j.scriptamat.2020.01.005 ↗
43. J.W. Christian: The Theory of Transformations in Metals and Alloys, Pergamon Press, Oxford, 2002.
44. N. Hoivik, K. Wang, K. Aasmundtveit, G. Salomonsen, A. Lapadatu, G. Kittilsland, and B. Stark: in 3rd Electronics System Integration Technology Conference ESTC, 2010, pp. 1–5.10.1109/ESTC.2010.5643013 ↗
45. C. Hang, J. He, Z. Zhang, H. Chen, and M. Li: Sci. Rep., 2018, vol. 8, 17422.10.1038/s41598-018-35708-6 ↗
46. R. Chinnam, C. Fauteux, J. Neuenschwander, and J. Janczak-Rusch: Acta Mater., 2011, vol. 59, pp. 1474–81.10.1016/j.actamat.2010.11.011 ↗
47. F.R. Young: Cavitation, Imperial College Press, London, 1999.10.1142/p172 ↗
48. K. Kago, K. Suetsugu, S. Hibino, T. Ikari, A. Furusawa, H. Takano, T. Horiuchi, K. Ishida, T. Sakaguchi, S. Kikuchi, and K. Matsushige: Mater. Trans., 2004, vol. 45, pp. 703–09.10.2320/matertrans.45.703 ↗
49. J. Ren and M.L. Huang: Sci. Technol. Weld. Join., 2021, vol. 26, pp. 205–12.10.1080/13621718.2021.1882147 ↗
50. A. Roshanghias, A. Rodrigues, S. Schwarz, and A. Steiger-Thirsfeld: SN Appl. Sci., 2020, vol. 2, p. 1091.10.1007/s42452-020-2887-9 ↗