Tailoring γ-austenite Stability to Improve Strength and Toughness of a Medium-Mn Steel
Source abstract
Abstract
A medium-Mn steel with nominal composition 0.20C–5Mn–0.2Si–0.2Al–bal.Fe (in wt pct) was hot rolled to plate and heat-treated at temperatures ranging from 550 °C to 650 °C and times ranging from 1 to 20 hours to obtain different γ-austenite fractions and stabilities, with the remainder of the microstructure being a combination of either α-ferrite or α-ferrite + θ-carbides. It was shown that when the steel was heat-treated to produce greater quantities of room temperature metastable γ-austenite, the γ-austenite was less stable as the austenite-stabilizing elements were dispersed among a greater fraction of material. Austenite stability, which is correlated with the Msα temperature, was calculated thermodynamically by measuring the local phase composition via Atom Probe Tomography. Quasi-static tension and Charpy V-notch (CVN) testing revealed that the austenite stability is directly correlated with CVN energy, where more stable austenite produces increased values of CVN toughness from room temperature down to – 80 °C. We observed that reduced CVN toughness at − 80 °C and − 40 °C in materials with low austenite stability was due to γ-austenite transformation during cooling prior to CVN testing. This work highlights that for materials with high strength and CVN toughness, it is critical to pursue heat treatments that balance both the concentration and stability of γ-austenite, instead of concentration alone. This work further demonstrates the importance of nano-scale composition in the γ-austenite and the utility of fine θ-carbide particles in producing steels with moderate strength and superior low temperature toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. R.L. Miller: Met. Trans. B., 1972, vol. 3, pp. 905–12.10.1007/BF02647665 ↗
2. M.J. Merwin: Mater. Sci. Forum., 2007, vol. 539–543, pp. 4327–32.10.4028/www.scientific.net/MSF.539-543.4327 ↗
3. H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–26.10.1179/mst.1994.10.7.621 ↗
4. D.E. Kim, Y.K. Park, O.Y. Lee, K.G. Jin, et al.: Korean. J. Mater. Res., 2005, vol. 15, pp. 115–23.
5. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scr. Mater., 2010, vol. 63, pp. 815–18.10.1016/j.scriptamat.2010.06.023 ↗
6. H. Luo, H. Dong, and M. Huang: Mater. Des., 2015, vol. 83, pp. 42–8.10.1016/j.matdes.2015.05.085 ↗
7. S. Lee, S-J. Lee, S. Santhosh Kumar, K. Lee, and B.C. De Cooman: Met. Trans. A, 2011, vol. 42A, pp. 3638–51.10.1007/s11661-011-0636-9 ↗
8. Y. Zhang, L. Wang, K.O. Findley, and J. Speer: Met. Trans. A., 2017, vol. 48A, pp. 2140–49.10.1007/s11661-017-3995-z ↗
9. J. Han, S.-H. Kang, S.-J. Lee, and Y.-K. Lee: J. Alloy Compd., 2016, vol. 681, pp. 580–88.10.1016/j.jallcom.2016.04.014 ↗
10. J. Han, S.-J. Lee, J.-G. Jung, and Y.-K. Lee: Acta Mater., 2014, vol. 78, pp. 369–77.10.1016/j.actamat.2014.07.005 ↗
11. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Met. Trans. A., 2011, vol. 42A, pp. 3691–701.10.1007/s11661-011-0687-y ↗
12. A. Arlazarov, M. Goune, O. Bouaziz, A. Hazotte, G. Petigand, and P. Barges: Mater. Sci. Eng. A., 2012, vol. 545, pp. 31–39.10.1016/j.msea.2012.02.024 ↗
13. D.M. Field and D.C. Van Aken: Met. Trans. A., 2016, vol. 47A, pp. 1912–17.10.1007/s11661-016-3394-x ↗
14. D.M. Field, J. Qing, and D.C. Van Aken: Met. Trans. A., 2018, vol. 49, pp. 4615–32.10.1007/s11661-018-4798-6 ↗
15. D.M. Field and D.C. Van Aken: Met. Trans. A., 2018, vol. 49(4), pp. 1152–66.10.1007/s11661-018-4481-y ↗
16. D.J. Magagnosc, D.M. Field, C.S. Meredith, T.R. Walter, K.R. Limmer: J.T. Lloyd, Mater. Sci. Eng. A, 2020, 799, https://doi.org/10.1016/j.msea.2020.140252.10.1016/j.msea.2020.140252 ↗
17. Z.Z. Zhao, J.H. Liang, A.M. Zhao, J.T. Liang, D. Tang, and Y.P. Gao: J. Alloy Compd., 2017, vol. 691, pp. 51–59.10.1016/j.jallcom.2016.08.093 ↗
18. M. Niikura and J.W. Morris: Met Trans. A., 1980, vol. 11, pp. 1531–40.10.1007/BF02654516 ↗
19. J. Hu, L.-X. Du, W. Xu, J.-H. Zhai, Y. Dong, Y.-J. Liu, and R.D.K. Misra: Mater. Charact., 2018, vol. 136, pp. 20–28.10.1016/j.matchar.2017.11.058 ↗
20. J.I. Kim, C.K. Syn, and J.W. Morris: Metall. Trans. A., 1983, vol. 14, pp. 93–103.10.1007/BF02643742 ↗
21. D.M. Field, J.S. Montgomery, K.R. Limmer, and K. Cho: Met. Trans. A., 2020, vol. 51, pp. 1038–43.10.1007/s11661-019-05599-x ↗
22. D.M. Field, S.R. Cluff, K.R. Limmer, J.S. Montgomery, K.C. Cho: Metals, vol. 11(5), p. 723. https://doi.org/10.3390/met11050723.10.3390/met11050723 ↗
23. J. Chen, C. Li, J. Ren, X. Tu, and L. Chen: Mater. Sci. Eng. A., 2019, vol. 754, pp. 178–89.10.1016/j.msea.2019.03.029 ↗
24. J.H. Holloman and L.D. Jaffe, WAL 320/28 (ADa951095): The Metallurgical Design of Steels for Optimum Mechanical Properties, Watertown Arsenal Laboratories, 1945.
25. D.M. Field, L.G. Garza-Martinez, and D.C. Van Aken: Met. Trans. A., 2020, vol. 51, pp. 4427–33.10.1007/s11661-020-05901-2 ↗
26. R. Bergmann, R. Chan, R. Hielscher, J. Persch, and G. Steidl: Inverse Probl. Imaging., 2016, vol. 10, pp. 281–304.
27. W. Pantleon: Scr. Mater., 2008, vol. 58, pp. 994–97.10.1016/j.scriptamat.2008.01.050 ↗
28. ASTM STandard E8-16a: ASTM International, West Conshohocken PA, 2016 https://doi.org/10.1520/e0008_e0008m-16a.10.1520/e0008_e0008m-16a ↗
29. ASTM STandard E23-18: ASTM International, West Conshohocken PA, 2018 https://doi.org/10.1520/e0023-18.10.1520/e0023-18 ↗
30. D.C. Van Aken, T.O. Webb, and J.D. Green: 23rd International Federation of Heat Treatment and Surface Engineering Congress, Savannah GA, 2016, pp. 262–72.
31. D.M. Field, D.S. Baker, and D.C. Van Aken: Met. Trans A., 2017, vol. 48, pp. 2150–63.10.1007/s11661-017-4020-2 ↗
32. S.T. Pisarik and D.C. Van Aken: Met. Trans. A., 2016, vol. 47, pp. 1009–18.10.1007/s11661-015-3265-x ↗
33. J.T. Lloyd, D.M. Field, and K.R. Limmer: Mater. Des., 2020, https://doi.org/10.1016/j.matdes.2020.108878.10.1016/j.matdes.2020.108878 ↗
34. R.S. Varanasi, M. Lipinska-Chwatek, J. Mayer, B. Gault, and D. Ponge: Scr. Mater., 2022, https://doi.org/10.1016/j.scriptamat.2021.114228.10.1016/j.scriptamat.2021.114228 ↗
35. B.C. De Cooman and J.G. Speer: “Austenite Decomposition in Fe-C-X Alloy Systems,” Fundamentals of Steel Product Physical Metallurgy, 1st Edition, ASM International, Materials Park, OH, 2011, p. 77.
36. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗