Impression Creep Behavior of an Mg–Zn–RE Alloy at Elevated Temperatures
Source abstract
Abstract
Mg–Zn–RE alloys are promising candidates for automotive and aerospace applications as, among magnesium alloys, they have better corrosion and creep resistance abilities at elevated temperatures. This study evaluates the high-temperature creep behavior of ZE41 magnesium alloy, belonging to the Mg–Zn–RE family, using impression test. Impression tests were performed under a constant temperature and stress with a flat-ended cylindrical punch. Power law and Eyring relationships were used to analyze the creep mechanism. By applying the power-law relationship, it was found that the creep exponent decreased from 7.5 to 4 in the temperature range of 493 K to 593 K. Activation energy increased from 78.5 to 107.1 kJ/mol in the applied stress range of 350 to 500 MPa (normalized stress: 0.024 ≤ σimp/G ≥ 0.034). Using the Eyring relationship, a single activation energy of 25 kJ/mol for the entire stress and temperature range was obtained. Based on the creep exponent and activation energy, it is proposed that pipe-diffusion-controlled dislocation climb is the dominant mechanism, but grain boundary sliding also contributes at higher stresses.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. I.J. Polmear: Light Alloys: From Traditional Alloys to Nanocrystals, 4th ed., Butterworth-Heinemann, 2006, pp. 237–87.10.1016/B978-075066371-7/50009-8 ↗
2. E. Aghion, B. Bronfín, F. Von Buch, S. Schumann, and H. Friedrich: JOM., 2003, vol. 55, pp. 30–3.10.1007/s11837-003-0206-8 ↗
3. S. Wei, Y. Chen, Y. Tang, X. Zhang, M. Liu, S. Xiao, and Y. Zhao: Mater. Sci. Eng. A., 2009, vol. 508, pp. 59–63.10.1016/j.msea.2008.12.049 ↗
4. U.K. Karl, H. Yuanding, D. Hajo, and H. Norbert: Mater. Sci. Forum., 2010, vol. 638–642, pp. 73–80.
5. B.I. Bondarev and L.L. Rokhlin: Metallurg., 2002, vol. 324, pp. 41–2.
6. J.F. Nie: Scr. Mater., 2003, pp. 981–84.10.1016/S1359-6462(02)00587-0 ↗
7. J.R. TerBush, O.H. Chen, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A., 2012, vol. 43A, pp. 3120–34.10.1007/s11661-012-1158-9 ↗
8. S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: Scr. Mater., 2010, vol. 63, pp. 698–703.10.1016/j.scriptamat.2010.02.005 ↗
9. A. Luo and M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259–71.10.1007/BF01171534 ↗
10. Y. Zhang, Q. Huo, Z. Zhang, Z. Xiao, C. Wang, A. Hashimoto, and X. Yang: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 3910–30.10.1007/s11661-021-06352-z ↗
11. S.R. Agnew and J.F. Nie: Scr. Mater., 2010, vol. 63, pp. 671–3.10.1016/j.scriptamat.2010.06.029 ↗
12. A.A. Luo: Int. Mater. Rev., 2004, vol. 49, pp. 13–30.10.1179/095066004225010497 ↗
13. M. Pekguleryuz and M. Celikin: Int. Mater. Rev., 2010, vol. 55, pp. 197–217.10.1179/095066010X12646898728327 ↗
14. L. Peng, F. Yang, J.F. Nie, and J.C.M. Li: Mater. Sci. Eng. A., 2005, vol. 410–411, pp. 42–7.10.1016/j.msea.2005.08.031 ↗
15. G. Nayyeri and R. Mahmudi: Mater. Sci. Eng. A., 2010, vol. 527, pp. 669–78.10.1016/j.msea.2009.08.056 ↗
16. A. Baghani, H. Khalilpour, and S.M. Miresmaeili: Trans. Nonferrous Met. Soc. China., 2020, vol. 30, pp. 896–904.10.1016/S1003-6326(20)65263-3 ↗
17. G. Nayyeri and R. Mahmudi: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2087–98.10.1016/j.msea.2009.11.053 ↗
18. M. Keyvani, R. Mahmudi, and G. Nayyeri: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 1990–2003.10.1007/s11661-010-0564-0 ↗
19. T. Rzychoń: Arch. Civ. Mech. Eng., 2020, vol. 20, pp. 1–13.10.1007/s43452-020-00101-6 ↗
20. L.Y. Wei, G.L. Dunlop, and H. Westengen: Metall. Mater. Trans. A., 1995, vol. 26A, pp. 1705–16.10.1007/BF02670757 ↗
21. M.C. Zhao, M. Liu, G.L. Song, and A. Atrens: Adv. Eng. Mater., 2008, vol. 10, pp. 104–11.10.1002/adem.200700246 ↗
22. C.H. Cáceres and A. Blake: Phys. Status Solidi Appl. Res., 2002, vol. 194, pp. 147–58.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
23. M. Suzuki, T. Kimura, J. Koike, and K. Maruyama: Scr. Mater., 2003, vol. 48, pp. 997–1002.10.1016/S1359-6462(02)00590-0 ↗
24. W.C. Neil, M. Forsyth, P.C. Howlett, C.R. Hutchinson, and B.R.W. Hinton: Corros. Sci., 2009, vol. 51, pp. 387–94.10.1016/j.corsci.2008.11.005 ↗
25. W.C. Neil, M. Forsyth, and P.C. Howlett: C. R. Corros. Sci., 2011, vol. 53, pp. 3299–308.10.1016/j.corsci.2011.06.005 ↗
26. E. Kermani, F. Biniyazan, B. Rezaee, and H. Soleimanimehr: J. Mod. Process. Manuf. Prod., 2020, vol. 9, pp. 43–9.
27. F. Naghdi and R. Mahmudi: Mater. Sci. Eng. A., 2014, vol. 616, pp. 161–70.10.1016/j.msea.2014.08.031 ↗
28. H. Wang, Q.D. Wang, C.J. Boehlert, J. Yang, D.D. Yin, J. Yuan, and W.J. Ding: Mater. Sci. Eng. A., 2016, vol. 649, pp. 313–24.10.1016/j.msea.2015.10.001 ↗
29. S.N.G. Chu and J.C.M. Li: J Mater Sci., 1977, vol. 12, pp. 2200–8.10.1007/BF00552241 ↗
30. F. Yang and J.C.M. Li: Mater. Sci. Eng. R Rep., 2013, vol. 74, pp. 233–53.10.1016/j.mser.2013.06.002 ↗
31. W.S. Gibbs, S.H. Wang, D.K. Matlock, and D.L. Olson: Weld. J., 1985, vol. 64, pp. 153–8.
32. V. Thomas Paul, V.D. Vijayanand, C. Sudha, and S. Saroja: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 425–38.10.1007/s11661-016-3823-x ↗
33. J.P. Rouse, W. Sun, and T.H. Hyde: J. Strain Anal. Eng. Des., 2013, vol. 48, pp. 494–511.10.1177/0309324713499149 ↗
34. D. Ebenezer, S.R. Koteswara-Rao, S. Vijayan, and R. Rajeswari: J. Mater., 2021, https://doi.org/10.1177/14644207211047699.10.1177/14644207211047699 ↗
35. S.K. Sahoo, B.N. Sahoo, and S.K. Panigrahi: Mater. Sci. Eng. A., 2020, vol. 773, p. 138883.10.1016/j.msea.2019.138883 ↗
36. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 116–27.10.1007/s11661-008-9699-7 ↗
37. S. Ansary, R. Mahmudi, and M.J. Esfandyarpour: Mater. Sci. Eng. A., 2012, vol. 556, pp. 9–14.10.1016/j.msea.2012.06.052 ↗
38. D.H. Sastry: Mater. Sci. Eng. A., 2005, vol. 409, pp. 67–75.10.1016/j.msea.2005.05.110 ↗
39. K.R. Athul, U.T.S. Pillai, A. Srinivasan, and B.C. Pai: Adv. Eng. Mater., 2016, vol. 18, pp. 770–94.10.1002/adem.201500393 ↗
40. M.D. Mathew, H. Yang, S. Movva, and K.L. Murty: Metall. Mater. Trans. A., 2005, vol. 36A, pp. 99–105.10.1007/s11661-005-0142-z ↗
41. K. Milička, P. Pérez, F. Dobeš, G. Garcés, and P. Adeva: Mater. Sci. Eng. A., 2009, vol. 510–511, pp. 377–81.10.1016/j.msea.2008.06.059 ↗
42. R. Alizadeh, R. Mahmudi, and T.G. Langdon: Mater. Sci. Eng. A., 2013, vol. 564, pp. 423–30.10.1016/j.msea.2012.11.089 ↗
43. B. Nami, H. Razavi, S. Mirdamadi, S.G. Shabestari, and S.M. Miresmaeili: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 1973–82.10.1007/s11661-010-0238-y ↗
44. M.E. Kassner and R. Ermagan: Metals (Basel)., 2019, vol. 9, pp. 1–6.10.3390/met9121345 ↗
45. H. Luthy, A.K. Miller, and O.D. Sherby: Acta Metall., 1980, vol. 28, pp. 169–78.10.1016/0001-6160(80)90066-8 ↗
46. M.E. Kassner: Metals (Basel)., 2020, vol. 10, p. 1284.10.3390/met10101284 ↗
47. F. Yang and J.C.M. Li: Mater. Sci. Eng. A., 1995, vol. 201, pp. 40–9.10.1016/0921-5093(95)09762-7 ↗
48. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 3488–98.10.1007/s11661-010-0398-9 ↗
49. S.M. Zhu, B.L. Mordike, and J.F. Nie: Metall. Mater. Trans. A., 2006, vol. 37A, pp. 1221–9.10.1007/s11661-006-1073-z ↗
50. A.K.S. Bankoti, A.K. Mondal, H. Dieringa, B.C. Ray, and S. Kumar: Mater. Sci. Eng. A., 2016, vol. 673, pp. 332–45.10.1016/j.msea.2016.07.087 ↗
51. R. Mahmudi and S. Moeendarbari: Mater. Sci. Eng. A., 2013, vol. 566, pp. 30–9.10.1016/j.msea.2012.12.076 ↗
52. E. Mohammadi Mazraeshahi, B. Nami, and S.M. Miresmaeili: Mater. Des., 2013, vol. 51, pp. 427–31.10.1016/j.matdes.2013.04.045 ↗
53. Y. Zhang, L. Yang, C. Ge, S. Pang, X. Wang, Z. Zhang, and Z. Han: J. Mater. Eng. Perform., 2019, vol. 28, pp. 394–403.10.1007/s11665-018-3783-y ↗
54. D.D. Yin, Q.D. Wang, C.J. Boehlert, and W.J. Ding: J. Mater. Sci., 2012, vol. 47, pp. 6263–75.10.1007/s10853-012-6546-4 ↗