Mechanisms of the Origin of Fine and Non-Dendritic Grains at the Sonotrode–Liquid Metal Interface During Ultrasonic Solidification of Metals
Source abstract
Abstract
Proposed grain refinement mechanisms during ultrasonic solidification have been explained in terms of refinement between cavitation enhanced nucleation and fragmentation of dendrites according to the casting conditions. Solidification studies also describe the activation of nucleation under pressure pulses after bubble implosion as an additional supporting mechanism for grain refinement. This study clarifies some overlooked concepts and proposes a plausible grain refinement mechanism explaining the role of cavitation in pure Zn and a Mg–6 wt pct Zn alloy. Equivalent grain size and grain density have been obtained in pure Zn and the Mg–6 wt pct Zn alloy (grain size distribution ranging from 40 to 200 µm) when UST was applied after the onset of solidification. These fine, non-dendritic grains originate from the cavitation zone beneath the sonotrode. Significant thermal undercooling surrounding the low superheat sonotrode in contact with the melt is responsible for the formation of a solidified layer (typically the thickness is equivalent to the average grain diameter) at the sonotrode–melt interface. High-frequency vibrations with or without cavitation at this interface assist the separation of these fine grains, which are then carried into the melt by acoustic streaming. A possible mechanism for the separation of fine grains produced from the cavitation zone is explained with the help of established concepts reported for the ultrasonic atomization process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. S. Nalesso, M.J. Bussemaker, R.P. Sear, M. Hodnett, J. Lee, Ultrason. Sonochem. 57, 125–138 (2019)10.1016/j.ultsonch.2019.04.020 ↗
2. J.R.G. Sander, B.W. Zeiger, K.S. Suslick, Ultrason. Sonochem. 21, 1908–1915 (2014)10.1016/j.ultsonch.2014.02.005 ↗
3. J. Campbell, Int. Met. Rev. 26, 71–108 (1981)10.1179/imr.1981.26.1.71 ↗
4. B. Chalmers: in Principles of Solidification, Wiley, 1964, pp. 62–89.
5. O.V. Abramov, Ultrasonics 25, 73–82 (1987)10.1016/0041-624X(87)90063-1 ↗
6. G.I. Eskin, Ultrason. Sonochem. 8, 319–325 (2001)10.1016/S1350-4177(00)00074-2 ↗
7. B. Wang, D. Tan, T.L. Lee, J.C. Khong, F. Wang, D. Eskin, T. Connolley, K. Fezzaa, J. Mi, Acta Mater. 144, 505–515 (2018)10.1016/j.actamat.2017.10.067 ↗
8. D.G. Eskin, I. Tzanakis, F. Wang, G.S.B. Lebon, T. Subroto, K. Pericleous, J. Mi, Ultrason. Sonochem. 52, 455–467 (2019)10.1016/j.ultsonch.2018.12.028 ↗
9. W.W. Xu, I. Tzanakis, P. Srirangam, W.U. Mirihanage, D.G. Eskin, A.J. Bodey, P.D. Lee, Ultrason. Sonochem. 31, 355–361 (2016)10.1016/j.ultsonch.2016.01.017 ↗
10. C. Wang, T. Connolley, I. Tzanakis, D. Eskin, J. Mi, Materials 13, 44 (2020)10.3390/ma13010044 ↗
11. G.S.B. Lebon, I. Tzanakis, G. Djambazov, K. Pericleous, D.G. Eskin, Ultrason. Sonochem. 37, 660–668 (2017)10.1016/j.ultsonch.2017.02.031 ↗
12. Y. Fang, T. Yamamoto, S. Komarov, Ultrason. Sonochem. 48, 79–87 (2018)10.1016/j.ultsonch.2018.05.011 ↗
13. J. Kang, X. Zhang, S. Wang, J. Ma, T. Huang, Ultrasonics 57, 11–17 (2015)10.1016/j.ultras.2014.10.004 ↗
14. R. Li, Z. Liu, F. Dong, X. Li, P. Chen, Metall. Mater. Trans. A. 47A, 3790–3796 (2016)10.1007/s11661-016-3576-6 ↗
15. H. Peng, R. Li, X. Li, S. Ding, M. Chang, L. Liao, Y. Zhang, P. Chen, Materials (Basel) 12, 2828 (2019)10.3390/ma12172828 ↗
16. N. Balasubramani, D. StJohn, M. Dargusch, G. Wang, Materials (Basel) 12, 3187 (2019)10.3390/ma12193187 ↗
17. G. Salloum-Abou-Jaoude, D.G. Eskin, G.S.B. Lebon, C. Barbatti, P. Jarry, M. Jarrett, Light Met. 2019, 1605–1610 (2019)
18. G.S.B. Lebon, G. Salloum-Abou-Jaoude, D. Eskin, I. Tzanakis, K. Pericleous, P. Jarry, Ultrason. Sonochem. 54, 171–182 (2019)10.1016/j.ultsonch.2019.02.002 ↗
19. B. Nagasivamuni, G. Wang, D.H. StJohn, M.S. Dargusch, J. Cryst. Growth 495, 20–28 (2018)10.1016/j.jcrysgro.2018.05.006 ↗
20. B. Nagasivamuni, G. Wang, D.H. StJohn, and M. S. Dargusch: in Light Metals, Springer, Cham, 2019, pp. 1579–86.10.1007/978-3-030-05864-7_200 ↗
21. G. Wang, Q. Wang, M.A. Easton, M.S. Dargusch, M. Qian, D.G. Eskin, D.H. StJohn, Sci. Rep. Uk 7, 9729 (2017)10.1038/s41598-017-10354-6 ↗
22. B. Nagasivamuni, G. Wang, D.H. StJohn, M.S. Dargusch, J. Cryst. Growth 512, 20–32 (2019)10.1016/j.jcrysgro.2019.02.004 ↗
23. N. Balasubramani, G. Wang, M.A. Easton, D.H. StJohn, M.S. Dargusch, J. Magnes. Alloy (2020). https://doi.org/10.1016/j.jma.2020.08.00610.1016/j.jma.2020.08.006 ↗
24. M.S. Dargusch, N. Balasubramani, J. Venezuela, S. Johnston, G. Wang, C. Lau, M. Bermingham, D. Kent, D.H. StJohn, Scripta Mater. 177, 234–240 (2020)10.1016/j.scriptamat.2019.10.028 ↗
25. N. Balasubramani, G. Wang, D.H. StJohn, M.S. Dargusch, Front. Mater. 6, 322 (2019)10.3389/fmats.2019.00322 ↗
26. G. Wang, M.S. Dargusch, M. Qian, D.G. Eskin, D.H. StJohn, J. Cryst. Growth 408, 119–124 (2014)10.1016/j.jcrysgro.2014.09.018 ↗
27. G. Wang, Q. Wang, N. Balasubramani, M. Qian, D.G. Eskin, M.S. Dargusch, D.H. StJohn, Metall. Mater. Trans. A 50A, 5253–5263 (2019)10.1007/s11661-019-05448-x ↗
28. E.Q. Wang, G. Wang, M.S. Dargusch, M. Qian, D.G. Eskin, D.H. StJohn, IOP Conf. Ser. Mater. Sci. Eng. 117, 012050 (2016)10.1088/1757-899X/117/1/012050 ↗
29. G. Wang, E.Q. Wang, A. Prasad, M. Dargusch, and D.H. StJohn: in Shape Casting: 6th International Symposium, Wiley, 2016, pp. 141–50.10.1002/9781119274865.ch18 ↗
30. N. Balasubramani, G. Wang, D.H. StJohn, M.S. Dargusch, J. Mater. Sci. Technol. 65, 38–53 (2020)10.1016/j.jmst.2020.04.080 ↗
31. H.R. Kotadia, M. Qian, D.G. Eskin, A. Das, Mater. Des. 132, 266–274 (2017)10.1016/j.matdes.2017.06.065 ↗
32. M. Qian, A. Ramirez, A. Das, J. Cryst. Growth 311, 3708–3715 (2009)10.1016/j.jcrysgro.2009.04.036 ↗
33. A. Ramirez, M. Qian, B. Davis, T. Wilks, D.H. StJohn, Scripta Mater. 59, 19–22 (2008)10.1016/j.scriptamat.2008.02.017 ↗
34. X. Chen, F. Ning, J. Hou, Q. Le, Y. Tang, Ultrason. Sonochem. 40, 433–441 (2018)10.1016/j.ultsonch.2017.07.027 ↗
35. T.V. Atamanenko, D.G. Eskin, L. Zhang, L. Katgerman, Metall. Mater. Trans. A 41A, 2056–2066 (2010)10.1007/s11661-010-0232-4 ↗
36. H.R. Kotadia, M. Qian, A. Das, J. Alloys Compd. 823, 153833 (2020)10.1016/j.jallcom.2020.153833 ↗
37. J.J. Sobczak, L. Drenchev, R. Asthana, Int. J. Cast Met. Res. 25, 1–14 (2012)10.1179/1743133611Y.0000000016 ↗
38. K.S. Suslick, G.J. Price, Annu. Rev. Mater. Sci. 29, 295–326 (1999)10.1146/annurev.matsci.29.1.295 ↗
39. G.S.B. Lebon, I. Tzanakis, K. Pericleous, D. Eskin, P.S. Grant, Ultrason. Sonochem. 55, 243–255 (2019)10.1016/j.ultsonch.2019.01.021 ↗
40. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, D.J. Bristow, Acta Mater. 48, 2823–2835 (2000)10.1016/S1359-6454(00)00094-X ↗
41. Z. Fan, Y. Wang, M. Xia, S. Arumuganathar, Acta Mater. 57, 4891–4901 (2009)10.1016/j.actamat.2009.06.052 ↗
42. H.R. Kotadia, A. Das, J. Alloys Compd. 620, 1–4 (2015)10.1016/j.jallcom.2014.09.089 ↗
43. S. Chankitmunkong, D.G. Eskin, C. Limmaneevichitr, Metall. Mater. Trans. A. 51A, 818–829 (2020)10.1007/s11661-019-05575-5 ↗
44. Q.L. Bai, Y. Li, H.X. Li, Q. Du, J.S. Zhang, L.Z. Zhuang, Metall. Mater. Trans. A 47A, 4080–4091 (2016)10.1007/s11661-016-3588-2 ↗
45. C.J. Todaro, M.A. Easton, D. Qiu, G. Wang, D.H. StJohn, M. Qian, Metall. Mater. Trans. A. 48A, 5579–5590 (2017)10.1007/s11661-017-4325-1 ↗
46. C.J. Todaro, M.A. Easton, D. Qiu, G. Wang, D.H. StJohn, M. Qian, J. Mater. Process. Technol. 271, 346–356 (2019)10.1016/j.jmatprotec.2019.04.008 ↗
47. G. Wang, Q. Wang, N. Balasubramani, Ma. Qian, D.G. Eskin, M.S. Dargusch, D.H. StJohn, Metall. Mater. Trans. A. 50A, 5253–5263 (2019)10.1007/s11661-019-05448-x ↗
48. G. Wang, P. Croaker, M. Dargusch, D. McGuckin, D. StJohn, Comput. Mater. Sci. 134, 116–125 (2017)10.1016/j.commatsci.2017.03.041 ↗
49. B. Chalmers, Principles of Solidification (Wiley, New York, 1964), pp. 253–281
50. A. Ohno: in Solidification: The Separation Theory and its Practical Applications, ed. A. Ohno, Springer, Berlin, 1987, pp. 42–82.10.1007/978-3-642-95537-2_3 ↗
51. D.M. Stefanescu: in Science and Engineering of Casting Solidification, 2nd ed., Springer, Boston, 2009, pp. 1–22.10.1007/978-0-387-74612-8_5 ↗
52. R. Rajan, A.B. Pandit, Ultrasonics 39, 235–255 (2001)10.1016/S0041-624X(01)00054-3 ↗
53. K.A. Ramisetty, A.B. Pandit, P.R. Gogate, Ultrason. Sonochem. 20, 254–264 (2013)10.1016/j.ultsonch.2012.05.001 ↗
54. R. Pohlman, K. Heisler, M. Cichos, Ultrasonics 12, 11–15 (1974)10.1016/0041-624X(74)90080-8 ↗
55. J.P. Canselier, H. Delmas, A.M. Wilhelm, B. Abismaïl, J. Dispers. Sci. Technol. 23, 333–349 (2002)10.1080/01932690208984209 ↗
56. A.J. Yule, Y. Al-Suleimani, Proc. R. Soc. A Math. Phys. 456, 1069–1085 (2000)10.1098/rspa.2000.0551 ↗
57. W.L. Wang, K.S. Wang, X. Lin, Int. J. Cast Met. Res. 23, 65–68 (2010)10.1179/174313309X451243 ↗