journal article·2020-12

Crystallographic and Morphological Evidence of Solid–Solid Interfacial Energy Anisotropy in the Sn-Zn Eutectic System

Shanmukha Kiran Aramanda, Sumeet Khanna, Sai Kiran Salapaka, Kamanio Chattopadhyay, Abhik Choudhury

Publisher page

Abstract

In this paper, we explore the morphological evolution during two-phase growth in the Sn-Zn eutectic system, which has a particularly low volume fraction of the minority Zn phase. The reason for this choice is its exotic nature, as even with such a low volume fraction, the reported morphology is “broken-lamellar,” in contrast to the usually expected hexagonal arrangement of Zn rods in the Sn matrix. Thus, the main objective of the study is to investigate the reasons behind this phenomenon. We begin by presenting experimental results detailing the morphology and crystallography of the eutectic microstructures under various combinations of thermal gradients and velocities in directional solidification conditions. Based on the crystallography and further specially designed experiments we find that the solid–solid interface between the Sn and Zn crystal is anisotropic. On the basis of the results, we propose a hypothesis that the presence of solid–solid interfacial energy anisotropy leads to the formation of predominantly broken-lamellar structures, even when the minority fraction is significantly low.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. W. Kurz, D.J. Fisher: Fundamentals of Solidification, vol. 1: trans tech publications Aedermannsdorf, Switzerland, 1986.
2. J.A. Dantzig, M. Rappaz, Solidification, EPFL Press, 2009.10.1201/9781439808030 ↗
3. G. A. Chadwick: Progress in materials science 1963, vol. 12, pp. 99–182.10.1016/0079-6425(63)90037-9 ↗
4. J. Hunt, K. Jackson: Trans. Metall. Soc. AIME 1966, vol. 236 (6), pp. 843–852.
5. R. Elliott: Eutectic Solidification Processing: Crystalline and Glassy Alloys, Elsevier, 2013.
6. M. Croker, R. Fidler, R. Smith: Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences 1973, vol. 335 (1600), pp. 15–37.10.1098/rspa.1973.0111 ↗
7. K. Kassner, C. Misbah: Physical Review A 1991, vol. 44 (10), pp. 6513.10.1103/PhysRevA.44.6513 ↗
8. U. Hecht, L. Gránásy, T. Pusztai, B. Böttger, M. Apel, V. Witusiewicz, L. Ratke, J. De Wilde, L. Froyen, D. Camel, B. Drevet, G. Faivre, S. G. Fries, B. Legendre, S. Rex: Materials Science and Engineering: R: Reports 2004, vol. 46 (1-2), pp. 1–49.10.1016/j.mser.2004.07.002 ↗
9. A. Karma, M. Plapp: JOM 2004, vol. 56 (4), pp. 28–32.10.1007/s11837-004-0069-7 ↗
10. H. Walker, S. Liu, J. Lee, R. Trivedi: Metallurgical and Materials Transactions A 2007, vol. 38 (7), pp. 1417–1425.10.1007/s11661-007-9163-0 ↗
11. A. Parisi, M. Plapp: Acta Materialia 2008, vol. 56 (6), pp. 1348–1357.10.1016/j.actamat.2007.11.037 ↗
12. M. Perrut, S. Akamatsu, S. Bottin-Rousseau, G. Faivre: Physical Review E 2009, vol. 79 (3), pp. 032602.10.1103/PhysRevE.79.032602 ↗
13. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, R. Trivedi: Acta Materialia 2009, vol. 57 (4), pp. 941–971.10.1016/j.actamat.2008.10.020 ↗
14. S. Akamatsu, M. Plapp: Current Opinion in Solid State and Materials Science 2016, vol. 20 (1), pp. 46–54.10.1016/j.cossms.2015.10.002 ↗
15. R. Contieri, C. Rios, M. Zanotello, R. Caram: Materials characterization 2008, vol. 59 (6), pp. 693–699.10.1016/j.matchar.2007.05.025 ↗
16. A. Dennstedt, L. Ratke: Transactions of the Indian Institute of Metals 2012, vol. 65 (6), pp. 777–782.10.1007/s12666-012-0172-3 ↗
17. A. Choudhury: Transactions of the Indian Institute of Metals 2015, vol. 68 (6), pp. 1137–1143.10.1007/s12666-015-0659-9 ↗
18. J. Hötzer, M. Jainta, P. Steinmetz, B. Nestler, A. Dennstedt, A. Genau, M. Bauer, H. Köstler, U. Rüde: Acta Materialia 2015, vol. 93, pp. 194–204.10.1016/j.actamat.2015.03.051 ↗
19. J. Hötzer, P. Steinmetz, M. Jainta, S. Schulz, M. Kellner, B. Nestler, A. Genau, A. Dennstedt, M. Bauer, H. Köstler, U. Rüde: Acta Materialia 2016, vol. 106, pp. 249–259.10.1016/j.actamat.2015.12.052 ↗
20. P. Steinmetz, J. Hötzer, M. Kellner, A. Dennstedt, B. Nestler: Computational Materials Science 2016, vol. 117, pp. 205–214.10.1016/j.commatsci.2016.02.001 ↗
21. S. Liu, J. Lee, R. Trivedi: Acta Materialia 2011, vol. 59 (8), pp. 3102–3115.10.1016/j.actamat.2011.01.050 ↗
22. D. Cooksey, D. Munson, M. Wilkinson, A. Hellawell: Philosophical Magazine 1964, vol. 10 (107), pp. 745–769.10.1080/14786436408225381 ↗
23. A. Parisi, M. Plapp: EPL (Europhysics Letters) 2010, vol. 90 (2), pp. 26010.10.1209/0295-5075/90/26010 ↗
24. D. Lewis, J. Warren, W. Boettinger, T. Pusztai, L. Gránásy: Jom 2004, vol. 56 (4), pp. 34–39.10.1007/s11837-004-0070-1 ↗
25. M. Taylor, R. Fidler, R. Smith: Journal of Crystal Growth 1968, vol. 3, pp. 666–673.10.1016/0022-0248(68)90242-X ↗
26. T. Digges, R. Tauber: Metallurgical Transactions 1971, vol. 2 (6), pp. 1683–1689.10.1007/BF02913894 ↗
27. H. Kerr, M. Lewis: Journal of Crystal Growth 1972, vol. 15 (2), pp. 117–125.10.1016/0022-0248(72)90132-7 ↗
28. T. Digges Jr, R. Tauber: Journal of Crystal Growth 1971, vol. 8 (1), pp. 132–134.10.1016/0022-0248(71)90034-0 ↗
29. M. Savas, L. Clapham, R. Smith: Journal of Materials Science 1990, vol. 25 (2), pp. 909–913.10.1007/BF03372178 ↗
30. H. Kerr, W. Winegard: Canadian Metallurgical Quarterly 1967, vol. 6 (1), pp. 67–70.10.1179/cmq.1967.6.1.67 ↗
31. M. Taylor, R. Fidler, R. Smith: Metallurgical Transactions 1971, vol. 2 (7), pp. 1793–1798.10.1007/BF02913407 ↗
32. M. Şahin, E. Çadirli: Journal of Materials Science: Materials in Electronics 2012, vol. 23 (2), pp. 484–492.
33. J. Bromley, F. Vnuk, R. Smith: Journal of materials science 1983, vol. 18 (10), pp. 3143–3153.10.1007/BF00700799 ↗
34. G. Piatti, G. Pellegrini: Journal of ScieMaterialsnce 1976, vol. 11 (5), pp. 913–924.
35. G. Beghi, G. Piatti, K. Street: Journal of Materials Science 1971, vol. 6 (2), pp. 118–125.10.1007/BF00550341 ↗
36. M. Notis, D. Shah, S. Young, C. Graham: IEEE Transactions on Magnetics 1979, vol. 15 (2), pp. 957–966.10.1109/TMAG.1979.1060288 ↗
37. M. Sahoo, G. Delamore, R. Smith: Journal of Materials Science 1980, vol. 15 (5), pp. 1097–1103.10.1007/BF00551797 ↗
38. G. Nishimura, R. Fidler, M. Taylor, R. Smith: Canadian Metallurgical Quarterly 1969, vol. 8 (4), pp. 319–322.10.1179/cmq.1969.8.4.319 ↗
39. P. Taylor, H. Kerr, W. Winegard: Canadian Metallurgical Quarterly 1964, vol. 3 (3), pp. 235–237.10.1179/cmq.1964.3.3.235 ↗
40. D. Jaffrey, G. Chadwick: Metallurgical Transactions 1970, vol. 1 (12), pp. 3389–3396.10.1007/BF03037869 ↗
41. F. Vnuk, M. Sahoo, D. Baragar, R. Smith: Journal of Materials Science 1980, vol. 15 (10), pp. 2573–2583.10.1007/BF00550762 ↗
42. H. Kaya, M. Gündüz, E. Çadirli, O. Uzun: Journal of Materials Science 2004, vol. 39 (21), pp. 6571–6576.10.1023/B:JMSC.0000044897.98694.be ↗
43. H. Kaya, E. Çadırlı, M. Gündüz: Journal of materials engineering and performance 2003, vol. 12 (4), pp. 456–469.10.1361/105994903770343024 ↗
44. Y. Goto, M. Kurosaki, H. Esaka: Journal of the Japan Institute of Metals 2011, vol. 75 (7), pp. 392–397.10.2320/jinstmet.75.392 ↗
45. M. Şahin, F. Karakurt: Physica B: Condensed Matter 2018, vol. 545, pp. 48–54.10.1016/j.physb.2018.06.003 ↗
46. K. Sharma, R. Rai: Thermochimica acta 2012, vol. 535, pp. 66–70.10.1016/j.tca.2012.02.020 ↗
47. K. A. Jackson, J. D. Hunt: Transactions of The Metallurgical Society of AIME 1966, vol. 236, pp. 1129–1142.
48. B. Caroli, C. Caroli, G. Faivre, and J. Mergy: J. Cryst. Growth, vol. 118 (1992).10.1016/0022-0248(92)90058-Q ↗
49. A. Valance, C. Misbah, D. Temkin, and K. Kassner: Phys. Rev. E vol. 48, (1993).10.1103/PhysRevE.48.1924 ↗
50. S. Bottin-Rousseau, M. Şerefoǧlu, S. Akamatsu, and G. Faivre: IOP Conference Series: Materials Science and Engineering, vol. 27 (1), pp. 012088, (2012).10.1088/1757-899X/27/1/012088 ↗
51. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Materialia 2012, vol. 60 (6-7), pp. 3199–3205.10.1016/j.actamat.2012.02.031 ↗
52. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Materialia 2012, vol. 60 (6-7), pp. 3206–3214.10.1016/j.actamat.2012.02.033 ↗
53. S. Ghosh, A. Choudhury, M. Plapp, S. Bottin-Rousseau, G. Faivre, S. Akamatsu: Physical Review E 2015, vol. 91 (2), pp. 022407.10.1103/PhysRevE.91.022407 ↗
54. S. Ghosh, M. Plapp: Acta Materialia 2017, vol. 140, pp. 140–148.10.1016/j.actamat.2017.08.023 ↗
55. U. Hecht, J. Eiken, S. Akamatsu, S. Bottin-Rousseau: Acta Materialia 2019, vol. 170, pp. 268–277.10.1016/j.actamat.2019.03.035 ↗
56. S. Bottin-Rousseau, O. Senninger, G. Faivre, S. Akamatsu: Acta Materialia 2018, vol. 150, pp. 16–24.10.1016/j.actamat.2018.02.049 ↗
57. S. Mohagheghi, U. Hecht, S. Bottin-Rousseau, S. Akamatsu, G. Faivre, and M. Şerefoğlu: Effects of interphase boundary anisotropy on the three-phase growth dynamics in the $$\beta $$ (in)–in2bi–$$\gamma $$ (sn) ternary-eutectic system: In: IOP Conference Series: Materials Science and Engineering: Vol. 529: IOP Publishing, p. 012010, (2019).10.1088/1757-899X/529/1/012010 ↗
58. R. Elliot, A. Moore: Scripta Metallurgica 1969, vol. 3 (4), pp. 249–251.10.1016/0036-9748(69)90313-5 ↗
59. P. Pandey, C. Tiwary, K. Chattopadhyay: Journal of Electronic Materials 2016, vol. 45 (10), pp. 5468–5477.10.1007/s11664-016-4742-8 ↗
60. P. Pandey, C. Tiwary, K. Chattopadhyay: Journal of Electronic Materials 2019, vol. 48 (5), pp. 2660–2669.10.1007/s11664-018-06869-x ↗
61. M. Straumanis and N. Brakes: Z. Physik. Chem. B, vol. 38 (1937).
62. H. Herman: Adv. Mater. Res. Vol. 4: Wiley-Interscience (1970).
63. B. Cantor, G. Chadwick: Journal of Crystal Growth 1975, vol. 30 (1), pp. 109–112.10.1016/0022-0248(75)90208-0 ↗
64. Z. Moser, J. Dutkiewicz, W. Gasior, J. Salawa: Journal of Phase Equilibria 1985, vol. 6 (4), pp. 330–334.
65. H. G. Weller, G. Tabor, H. Jasak, C. Fureby: Computers in physics 1998, vol. 12 (6), pp. 620–631.10.1063/1.168744 ↗
66. A. J. Shahani, X. Xiao, P. W. Voorhees: Nature communications 2016, vol. 7, pp. 12953.10.1038/ncomms12953 ↗
67. I. Ansara, A.T. Dinsdale, and M.H. Rand: COST 507, Thermochemical Database for Light Metal Alloys, vol. 2, Office for Official Publication of the European Communities, Luxemburg, 1998.
68. A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field: Electron Backscatter Diffraction in Materials Science, Springer, 2000.10.1007/978-1-4757-3205-4 ↗
69. D.B. Williams and C.B. Carter: The Transmission Electron Microscope, Springer, 1996.10.1007/978-1-4757-2519-3 ↗
70. D. P. Field: Ultramicroscopy 1997, vol. 67 (1-4), pp. 1–9.10.1016/S0304-3991(96)00104-0 ↗
71. L. G. Ware, D. H. Suzuki, Z. C. Cordero: Journal of Materials Science 2020, vol. 55, pp. 1–12.10.1007/s10853-019-03876-z ↗
72. A. Passerone, N. Eustathopoulos: Acta Metallurgica 1982, vol. 30 (7), pp. 1349–1356.10.1016/0001-6160(82)90154-7 ↗