journal article·2020-10

Strain-Rate Dependence of the Martensitic Transformation Behavior in a 10 Pct Ni Multi-phase Steel Under Compression

P. K. Lambert, C. J. Hustedt, D. T. Casem, N. Sinclair, X. J. Zhang, K. M. Lee, A. F. T. Leong, B. E. Schuster, T. C. Hufnagel

Publisher page

Abstract

The deformation-induced transformation of metastable austenite to martensite can contribute to improved performance of many steel alloys in a range of applications. For example, one class of Ni-containing steels that has undergone consecutive heat treatments of quenching (Q), lamellarization (L), and tempering (T) exhibits improved ballistic resistance and low-temperature impact toughness. To better understand the origin of this improvement, we tracked the volume fraction of austenite present in a QLT 10 wt pct Ni steel during compression at low and high strain rates ( $$\dot{\varepsilon }={0.001}\,{{\text{s}}-1}$$ and $$\dot{\varepsilon }\simeq {2500}\,{{\text{s}}-1}$$ , respectively) using ex situ vibrating sample magnetometry measurements and in situ time-resolved X-ray diffraction measurements. We observe that the austenite-to-martensite transformation occurs more readily during quasi-static loading than during dynamic loading, even at small values of applied strain, which is qualitatively different from the behavior of steels known to undergo a strain-induced martensitic transformation mechanism. We propose that the strain-rate dependence of transformation in the QLT 10 pct Ni steel is dominated by the transformation in small austenite particles, where stress-assisted martensitic transformation is likely to be the dominant mechanism. Indirect evidence for this hypothesis is provided by electron backscatter diffraction measurements of deformed specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. J. Patel, M. Cohen: Acta Metallurgica 1953, vol. 1 (5), pp. 531–538.10.1016/0001-6160(53)90083-2 ↗
2. G. B. Olson, M. Cohen: J. Less Common Met. 1972, vol. 28 (1), pp. 107–118.10.1016/0022-5088(72)90173-7 ↗
3. G. B. Olson, M. Cohen: Metallurgical and Materials Transactions A-Phys. Metall. Mater. Sci. 1976, vol. 7 (12), pp. 1905–1914.10.1007/BF02659823 ↗
4. F. Lani, Q. Furnemont, T. Van Rompaey, F. Delannay, P. J. Jacques, and T. Pardoen: Acta Mater., vol. 55 (11), pp. 3695–3705 (2007).10.1016/j.actamat.2007.02.015 ↗
5. D. Isheim, A.H. Hunter, X.J. Zhang, D.N. Seidman: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., vol. 44A (7), pp. 3046–3059 (2013).10.1007/s11661-013-1670-6 ↗
6. C. C. Kinney, K. R. Pytlewski, A. G. Khachaturyan, J. W. Morris, Jr.: Acta Mater. 2014, vol. 69, pp. 372–385.10.1016/j.actamat.2014.01.058 ↗
7. E. Machlin, M. Cohen: Trans. Am. Inst. Mining and Metallurgical Engineers 1951, vol. 191 (11), pp. 1019–1029.
8. G. F. Bolling, R. H. Richman: Acta Metallurgica 1970, vol. 18, pp. 673–681.10.1016/0001-6160(70)90097-0 ↗
9. J. Kim and J. Morris: Metall. Trans. A-Phys. Metall. Mater. Sci., 1981, vol. 12 (11).10.1007/BF02643809 ↗
10. S.J. Wu, G.J. Sun, Q.S. Ma, Q.Y. Shen, L. Xu: Journal of Materials Processing Technology, vol. 213 (1), pp. 120–128 (2013).10.1016/j.jmatprotec.2012.08.005 ↗
11. X. Q. Zhao, T. Pan, Q. F. Wang, H. Su, C. F. Yang, Q. X. Yang, Y. Q. Zhang: Journal of Iron and Steel Research International 2007, vol. 14 (1), pp. 240–244.10.1016/S1006-706X(08)60086-2 ↗
12. T. Kobayashi, H. Tachibana, W. Yagi, Y. Ueda: Journal of the Japan Institute of Metals 1982, vol. 46 (4), pp. 433–440.10.2320/jinstmet1952.46.4_433 ↗
13. H. Kim, Y. Kim, J. Morris: ISIJ International 1998, vol. 38 (11), pp. 1277–1285.10.2355/isijinternational.38.1277 ↗
14. J.H. Kim, C. Syn, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science, vol. 14 (1), pp. 93–103 (1983).10.1007/BF02643742 ↗
15. Z. Guo, J. Morris: Scr. Mater., vol. 53 (8), pp. 933–936 (2005).10.1016/j.scriptamat.2005.06.027 ↗
16. B. Fultz, J. Kim, Y. Kim, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science, vol. 17 (6), pp. 967–972 (1986).10.1007/BF02661262 ↗
17. B. Fultz, J. Kim, Y. Kim, H. Kim, G. Fior, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science 1985, vol. 16 (12), pp. 2237–2249.10.1007/BF02670423 ↗
18. J.W. Morris, Jr., C. Kinney, K. Pytlewski, Y. Adachi: Sci. Technol. Adv. Mater., 2013, vol. 14 (1).10.1088/1468-6996/14/1/014208 ↗
19. P. Wang, K. S. Kumar: , Mater. Sci. Eng. A: Struct. Mater.: Properties Microstruct. Process. 2009, vol. 519 (1-2), pp. 184–197.10.1016/j.msea.2009.04.063 ↗
20. S. H. Chen, M. J. Zhao, X. Y. Li, L. J. Rong: J. Mater. Sci. Technol. 2012, vol. 28 (6), pp. 558–561.10.1016/S1005-0302(12)60097-8 ↗
21. B. Fultz, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science, vol. 16 (12), pp. 2251–2256 (1985).10.1007/BF02670424 ↗
22. B. Fultz, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science 1985, vol. 16 (2), pp. 173–177.10.1007/BF02816043 ↗
23. X. Zhao, T. Pan, Q. Wang, H. Su, C. Yang, Q. Yang: J. Iron Steel Res. Int., vol. 18 (5), 47 (2011)10.1016/S1006-706X(11)60064-2 ↗
24. R. Fonda, G. Spanos: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2014, vol. 45A (13), pp. 5982–5989.10.1007/s11661-014-2588-3 ↗
25. N. Nakada, J. Syarif, T. Tsuchiyama, S. Takaki: , Microstructure and Processing 2004, vol. 374 (1-2), pp. 137–144.10.1016/j.msea.2004.01.048 ↗
26. C. Syn, S. Jin, J. Morris: Metallurgical Transactions A-Physical Metallurgy and Materials Science 1976, vol. 7 (12), pp. 1827–1832.10.1007/BF02659812 ↗
27. D. Delagnes, F. Pettinari-Sturmel, M. Mathon, R. Danoix, F. Danoix, C. Bellot, P. Lamesle, A. Grellier: Acta Materialia 2012, vol. 60 (16), pp. 5877–5888.10.1016/j.actamat.2012.07.030 ↗
28. H. Na, S. Nambu, M. Ojima, J. Inoue, T. Koseki: Science 2014, vol. 45A (11), pp. 5029–5043.10.1007/s11661-014-2461-4 ↗
29. T. Pan, J. Zhu, H. Su, C.-F. Yang: Rare Metals 2015, vol. 34 (11), pp. 776–782.10.1007/s12598-015-0607-1 ↗
30. L. M. Dougherty, E. K. Cerreta, G. T. Gray III, C. P. Trujillo, M. F. Lopez, K. S. Vecchio, G. J. Kusinski: Metall. Mater. Trans. A 2009, vol. 40A, pp. 1835–1850.10.1007/s11661-009-9869-2 ↗
31. W. Dabboussi, J. A. Nemes: ISIJ Int. 2013, vol. 53 (8), pp. 1462–1470.10.2355/isijinternational.53.1462 ↗
32. S. Oliver, T. Jones, G. Fourlaris: Mater. Characterization 2007, vol. 58 (4), pp. 390–400.10.1016/j.matchar.2006.07.004 ↗
33. X. J. Zhang: Mater. Sci. Technol. 2012, vol. 28 (7), pp. 818–822.10.1179/1743284712Y.0000000015 ↗
34. D. Jain, D. Isheim, X. Zhang, G. Ghosh, D. N. Seidman: Metall. Mater. Trans. A 2017, vol. 48A, pp. 3642–3654.10.1007/s11661-017-4146-2 ↗
35. C. Syn, B. Fultz, and J. Morris: Metall. Trans. A 1978, , pp. 1635–1640.10.1007/BF02661946 ↗
36. G. B. Olson, M. Cohen: Metallurgical Transactions A-Physical Metallurgy and Materials Science 1982, vol. 13 (11), pp. 1907–1914.10.1007/BF02645934 ↗
37. S. S. Hecker, M. G. Stout, K. P. Staudhammer, J. L. Smith: Metallurgical Transactions A-Physical Metallurgy and Materials Science 1982, vol. 13 (4), pp. 619–626.10.1007/BF02644427 ↗
38. P. Nowakowski, J. Schlenker, M. Ray, P. Fischione: Microsc. Microanal. 2016, vol. 22 (S3), pp. 12–13.10.1017/S143192761600091X ↗
39. W. Chen, B. Song: Split Hopkinson (Kolsky) Bar: Design, Testing, and Applications, Springer, Berlin, 2011.10.1007/978-1-4419-7982-7 ↗
40. G. B. Olson, M. Cohen: Metallurgical Transactions 1975, vol. A6 (4), pp. 791–795.10.1007/BF02672301 ↗
41. P.K. Lambert, C.J. Hustedt, K.S. Vecchio, E.L. Huskins, D.T. Casem, S.M. Gruner, M.W. Tate, H.T. Philipp, A.R. Woll, P. Purohit, J.T. Weiss, V. Kannan, K.T. Ramesh, P. Kenesei, J. S. Okasinski, J. Almer, M. Zhao, A. G. Ananiadis, and T.C. Hufnagel: Rev. Sci. Instrum., 2014, vol. 85 (9), p. 09390110.1063/1.4893881 ↗
42. C. J.Hustedt, P. Lambert, V. Kannan, E. Huskins-Retzlaff, D. Casem, M. Tate, H. Philipp, A. Woll, P. Purohit, J. Weiss, S. Gruner, K. Ramesh, and T. Hufnagel: Journal of Dynamic Behavior of Materials 2018, vol. 4 (2), pp. 222–230.10.1007/s40870-018-0152-8 ↗
43. S.N. Luo, B.J. Jensen, D.E. Hooks, K. Fezzaa, K.J. Ramos, J.D. Yeager, K. Kwiatkowski, and T. Shimada: Rev. Sci. Instrum., 2012, vol. 83 (7), p. 073903.10.1063/1.4733704 ↗
44. K. Goetze, U. Lienert: A galvanometer based fast shutter. Presented at 10th International Conference on Synchrotron Radiation Instrumentation, Melbourne, Australia 27 September–2 October 2009.
45. S. T. Kelly, J. C. Trenkle, L. J. Koerner, S. C. Barron, N. Walker, P. O. Pouliquen, M. W. Tate, S. M. Gruner, E. M. Dufresne, T. P. Weihs, T. C. Hufnagel: J. Synchrotron Radiation 2011, vol. 18 (3), pp. 464–474.10.1107/S0909049511002640 ↗
46. T. Gnaeupel-Herold, A. Creuziger: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 528 (10-11), pp. 3594–3600 (2011).10.1016/j.msea.2011.01.030 ↗
47. S. Mohanlal: Journal of Physics C-Solid State Physics 1979, vol. 12 (17), pp. L651–L653.10.1088/0022-3719/12/17/003 ↗
48. L. Alexander: X-ray Diffraction Methods in Polymer Science. Wiley-Interscience, New York, 1969.
49. C. Li, L. Han, X. Luo, Q. Liu, J. Gu: Journal of Microscopy 2016, vol. 264 (2), pp. 252–258.10.1111/jmi.12465 ↗
50. L. Fan, D. Zhou, T. Wang, S. Li, Q. Wang: , Microstructure and Processing 2014, vol. 590, pp. 224–231.10.1016/j.msea.2013.10.037 ↗
51. N. Nakada, T. Tsuchiyama, S. Takaki, S. Hashizume: ISIJ International 2007, vol. 47 (10), pp. 1527–1532.10.2355/isijinternational.47.1527 ↗
52. D. Steinmetz, S. Zaefferer: Materials Science and Technology 2010, vol. 26 (6), pp. 640–645.10.1179/026708309X12506933873828 ↗
53. P. Hëdstrom, L. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, M. Odén: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 2009, vol. 40A (5), pp. 1039–1048.10.1007/s11661-009-9807-3 ↗
54. J. Talonen, H. Hanninen: Acta Mater. 2007, vol. 55 (18), pp. 6108–6118.10.1016/j.actamat.2007.07.015 ↗
55. H.-W. Yen, S. Ooi, M. Eizadjou, A. Bree, C.-Y. Huang, H. Bhadeshia, S. Ringer: Acta Mater. 2015, vol. 82, pp. 100–114.10.1016/j.actamat.2014.09.017 ↗
56. M.-M. Wang, C. Tasan, D. Ponge, A. Kostka, D. Raabe: Acta Mater. 2014, vol. 79, pp. 268–281.10.1016/j.actamat.2014.07.020 ↗