journal article·2020-02

Effects of Stress on Martensite Transformation During Continuous Cooling and Mechanical Response of a Medium-Carbon High-Strength Steel

Man Liu, Guang Xu, Guanghui Chen, Juan Jia, Zhenye Chen, Ziliu Xiong

Publisher page

Abstract

The effects of stress on martensite transformation at different continuous cooling rates and the mechanical response of a medium-carbon high-strength steel were investigated by the metallographic method, dilatometry, and tensile tests. The results show that the microstructure consisted of martensite and retained austenite (RA) regardless of whether stress was applied. The martensite start temperature increased by stress due to additional mechanical driving force. The amount of martensite increased, while the amount of RA decreased at the same cooling rate by applying stress. In addition, the martensite laths were refined and variant selection of martensite orientation was observed by applying stress. Moreover, the tensile strength increased from about 1470 to 2170 MPa by applying stress because of more martensite and the fraction of low-angle grain boundaries. The strength improvement with the increase of cooling rate under stress was larger than that in the specimens without stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. F. Maresca, V.G. Kouznetsova, M.G.D. Geers, and W.A. Curtin: Acta Mater., 2018, vol. 156, pp. 463–78.10.1016/j.actamat.2018.06.028 ↗
2. S. Sharma, B.R. Kumar, B.P. Kashyap, and N. Prabhu: Mater. Sci. Eng. A, 2018, vol. 725, pp. 215–27.10.1016/j.msea.2018.03.099 ↗
3. J.Y. Tian, G. Xu, Z.Y. Jiang, H.J. Hu, Q. Yuan, and X.L. Wan: Metall. Mater. Int., 2019. https://doi.org/10.1007/s12540-019-00370-8.10.1007/s12540-019-00370-8 ↗
4. H.S. Yang and H.K.D.H. Bhadeshia: Scripta Mater., 2009, vol. 60, pp. 493–95.10.1016/j.scriptamat.2008.11.043 ↗
5. X. Li, L. Chen, Y. Zhao, X. Yuan, and M.R.D. Kumar: Mater. Sci. Eng. A, 2018, vol. 715, pp. 257–65.10.1016/j.msea.2017.12.107 ↗
6. J. Huang and Z. Xu: Mater. Sci. Eng. A, 2006, vol. 438, pp. 254–57.10.1016/j.msea.2006.02.069 ↗
7. G.S. Ansell, P.J. Brofman, T.J. Nichol, and G. Judd: Int. Conf. on Martensitic Transformations ICOMAT ’79, G.B. Olson and M. Cohen, eds., 1979, pp. 350–55.
8. M. Nikravesh, M. Naderi, and G.H. Akbari: Mater. Sci. Eng. A, 2012, vol. 540, pp. 24–29.10.1016/j.msea.2012.01.018 ↗
9. K.W. Andrews: Iron Steel Inst., 1965, vol. 203, pp. 721–27.
10. C. Capdevila, F.G. Caballero, and C. García De Andrés: Mater. Sci. Technol., 2003, vol. 19, pp. 581–86.10.1179/026708303225001902 ↗
11. D.J.C. Mackay: Neur. Comput., 2014, vol. 4, pp. 448–72.10.1162/neco.1992.4.3.448 ↗
12. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
13. J. Wang, P.J.V.D. Wolk, and S.V.D. Zwaag: J. Mater. Sci., 2000, vol. 35, pp. 4393–4404.10.1023/A:1004865209116 ↗
14. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897–1904.
15. S. Chatterjee, H.S. Wang, J.R. Yang, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 641–44.10.1179/174328406X86128 ↗
16. M. Zhang, Y.H. Wang, C.L. Zheng, F.C. Zhang, and T.S. Wang: Mater. Sci. Eng. A, 2014, vol. 596, pp. 9–14.10.1016/j.msea.2013.11.097 ↗
17. M. Maalekian, E. Kozeschnik, S. Chatterjee, and H.K.D.H. Bhadeshia: J. Met. Sci., 2007, vol. 23, pp. 610–12.
18. C. Zhang, D. Cai, Y. Wang, M. Liu, B. Liao, and Y. Fan: Mater. Charact., 2008, vol. 59, pp. 1638–42.10.1016/j.matchar.2008.03.003 ↗
19. S.H.M. Anijdan, A. Rezaeian, and S. Yue: Mater Charact., 2012, vol. 63, pp. 27–38.10.1016/j.matchar.2011.11.003 ↗
20. S. Masoud and D.S. Mersagh: J. Manuf. Processes, 2018, vol. 34, pp. 313–28.10.1016/j.jmapro.2018.06.009 ↗
21. M Wang, G Xu, L Wang, YW Xu, ZL Xue (2017) J Wuhan Univ Technol, 32, 186–89.10.1007/s11595-017-1578-x ↗
22. C.Y. Wang, J. Shi, W.Q. Cao, and H. Dong: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3442–49.10.1016/j.msea.2010.02.020 ↗
23. F.R. Xiao, L. Bo, Y.Y. Shan, and K. Yang: Mater Charact., 2005, vol. 54, pp. 417–22.10.1016/j.matchar.2005.01.007 ↗
24. Y. Yan, G.L. Jiang, T.F. Guo, L.L. Zhang, and S.K. Wei: Heat Treat. Met., 2018, vol. 43, pp. 199–204 (in Chinese).
25. B.B. He, W. Xu, and M.X. Huang: Mater. Sci. Eng. A, 2014, vol. 609, pp. 141–46.10.1016/j.msea.2014.04.108 ↗
26. F. Marketz and F.D. Fischer: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 267–78.10.1007/BF02664665 ↗
27. E.S. Machlin and M. Cohen: JOM, 1951, vol. 3, pp. 746–54.10.1007/BF03397387 ↗
28. S.J. Lee and Y.K. Lee: Scripta Mater., 2009, vol. 60, pp. 1016–19.10.1016/j.scriptamat.2009.02.042 ↗
29. S. Kundu, A.K. Verma, and V. Sharma: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2552–65.10.1007/s11661-011-0971-x ↗
30. S. Kundu and H.K.D.H. Bhadeshia: Scripta Mater., 2007, vol. 57, pp. 869–72.10.1016/j.scriptamat.2007.06.056 ↗
31. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: J. Alloys Compds., 2013, vol. 577, pp. 528–32.10.1016/j.jallcom.2011.12.111 ↗
32. Z.Y. Tang, J.N. Huang, H. Ding, Z.H. Cai, and R.D.K. Misra: Mater. Sci. Eng. A, 2018, vol. 724, pp. 95–102.10.1016/j.msea.2018.03.085 ↗
33. L. Qi, A.G. Khachaturyan, and J.W. Morris: Acta Mater., 2014, vol. 76, pp. 23–39.10.1016/j.actamat.2014.04.038 ↗
34. B.B. He and M.X. Huang: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 688–94.10.1007/s11661-014-2681-7 ↗
35. M. Sabzil, M. Farzam (2019) Mater Res Expr 6: 1–15.
36. S.H.M. Anijdan and S. Yue: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1140–62.10.1007/s11661-011-0958-7 ↗
37. S.C. Li, C.Y. Guo, L.L. Hao, Y.L. Kang, and Y.G. An: Mater. Sci. Eng. A, 2019, vol. 759, pp. 624–32.10.1016/j.msea.2019.05.083 ↗