A Simplified Hot-Tearing Criterion for Shape Castings Based on Temperature-Field Simulation
Source abstract
Abstract
Current hot-tearing predictions for shape castings are suitable for well-investigated alloys with complete mechanical property databases, but are not applicable to newly developed alloys. This study proposed a simplified hot-tearing criterion for shape casting based on the hot-tearing sensitivity to strain rate during solidification. The criterion is simplified to a specific form: M = LRG1.5 < Mcritical, based on the constrained rod casting method that is used to evaluate the hot-tearing susceptibility of Mg alloys, where L (length of the constrained rod), R (the cooling rate), and G (the temperature gradient) can be calculated by numerical simulation, while Mcritical can be determined by comparison of simulation and experimental results in the constrained rod casting. The prediction of the hot-tearing criterion for a 14-inch (0.35 m) Mg wheel casting was in good agreement with the experimental results, confirming its practicability. The proposed hot-tearing criterion is suitable for newly developed alloys without need of consideration of their mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D.G. Eskin, Suyitno and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
2. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol.38, pp. 1511–1519.10.1007/s11661-007-9169-7 ↗
3. S. Li: Ph.D. Thesis, Worcester Polytechnic Institute, America, 2010.
4. J. Song, Z. Wang, Y. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, and N.Hort: J. Mater. Sci., 2016, vol. 51, pp. 2687–2704.10.1007/s10853-015-9583-y ↗
5. T.W. Clyne and G.J. Davies: Solidification and Casting of Metals, Metals Society, London, 1979, PP. 275-278.
6. Suyitno, W.H. Kool, and L. Katgerman: Mater. Sci. Forum, 2002, vols. 396–402, pp. 179–184.10.4028/www.scientific.net/MSF.396-402.179 ↗
7. S. Kou: Acta Mater., 2015,vol. 88, pp. 366–374.10.1016/j.actamat.2015.01.034 ↗
8. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32, pp. 697–705.10.1007/s11663-001-0124-5 ↗
9. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209–1214.10.4028/www.scientific.net/MSF.217-222.1209 ↗
10. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30, PP. 449–455.10.1007/s11661-999-0334-z ↗
11. ESI Group Inc: ProCAST 2011.0 User Manual, 2011.
12. M. Pokorny, C. Monroe, C. Beckermann, L. Bichler, and C. Ravindran: Int.J. Metalcast., 2008, vol. 2, PP. 41–53.10.1007/BF03355435 ↗
13. J.Z. Zhu, J. Guo, and M.T. Samonds: Int. J. Numer. Meth. Eng., 2011, vol. 87, PP. 289–308.10.1002/nme.3054 ↗
14. A.B. Phillion, R.W. Hamilton, D. Fuloria, A.C.L. Leung, P. Rockett, T. Connolley, and P.D.Lee: Acta Mater., 2011, vol. 59, 1436–1444.10.1016/j.actamat.2010.11.005 ↗
15. I. Farup, J.-M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, 1261–1269.10.1016/S1359-6454(01)00013-1 ↗
16. D. Argo, M. Pekguleryuz, P. Vermette, and M. Lefebvre: Proceedings of the Die Casting 2001, Cincinnati, OH, Oct. 29–Nov. 1, 2001, pp. 181–86.
17. G. Cao and S. Kou: Mater. Sci. Eng. A, 2006, vol. 417, PP. 230–238.10.1016/j.msea.2005.10.050 ↗
18. H. Huang: M.S. Thesis, School of Materials Science and Engineering, Shanghai Jiao Tong University, China, 2012 (in Chinese).
19. H. Huang, P. Fu, Y. Wang, L. Peng, and H. Jiang: Trans. Nonferr. Metals Soc., 2014, vol. 24, pp. 922–929.10.1016/S1003-6326(14)63144-7 ↗
20. P. Fu, L. Peng, H. Jiang, J. Chang, and C. Zhai: Mater. Sci. Eng. A, 2008, vol. 486, pp. 183−192.10.1016/j.msea.2007.08.064 ↗
21. P. Fu, L. Peng, H. Jiang, J. Chang, L. Ma, and C. Zhai: Mater. Sci. Eng. A, 2008, vol. 496, pp. 177−188.10.1016/j.msea.2008.05.010 ↗
22. A.K. Dahle and D.H. StJohn: Acta Mater., 1998, vol. 47, pp. 31–41.10.1016/S1359-6454(98)00342-5 ↗
23. J.F. Nie: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3891–3939.10.1007/s11661-012-1217-2 ↗
24. P. Fu, L. Peng, H. Jiang, W. Ding, and C. Zhai: China Foundry, 2014, vol. 11. pp. 277–286.
25. F. Pan, M. Yang, and X. Chen: J. Mater. Sci. Technol., 2016, vol. 32, pp. 1211–1221.10.1016/j.jmst.2016.07.001 ↗
26. H. Yu, Y. Xin, M. Wang, and Q. Liu: J. Mater. Sci. Technol., 2018, vol. 34, pp. 248–256.10.1016/j.jmst.2017.07.022 ↗
27. Y. Zhou, P. Fu, L. Peng, D. Wang, Y. Wang, B. Hu, M. Liu, A. K. Sachdev, and W. Ding: J. Magnes. Alloys, 2019, vol. 7, pp. 113–123.10.1016/j.jma.2019.02.003 ↗
28. Z. Li, A.A. Luo, Q. Wang, L. Peng, and P. Zhang: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4239–4257 .10.1007/s11661-016-3550-3 ↗
29. Z. Wang, J. Song, Y. Huang, A. Srinivasan, Z. Liu, K. Kainer, and N. Hort: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2108–2118.10.1007/s11661-015-2755-1 ↗
30. Z.Wang, Y. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K. Kainer, and N. Hort: J. Mater. Sci., 2014, vol. 49, pp. 353–362.10.1007/s10853-013-7712-z ↗