journal article·2019-10-15Open access

Wetting and Spreading Behavior of Liquid Si-Ti Eutectic Alloy in Contact with Glassy Carbon and SiC at T = 1450 °C

Donatella Giuranno, Natalia Sobczak, Grzegorz Bruzda, Rafal Nowak, Wojciech Polkowski, Artur Kudyba, Adelajda Polkowska, Rada Novakovic

Abstract

The contact heating (CH) sessile drop and capillary purification (CP) methods were applied for a fundamental study concerning the wettability and reactivity of liquid Si-16.2 at. pct Ti alloy (eutectic composition) in contact with glassy carbon (GC) and SiC at T = 1450 °C under an Ar atmosphere. Different spreading stages with different slopes, depending on the starting conditions of the materials used, where observed. On the contrary, the final contact angle value seemed not affected and the values of ? ? 44 deg ± 2 and ? ? 42 deg ± 2 where displayed on GC and SiC, respectively. The solidified Si-Ti eutectics/GC and Si-Ti eutectics/SiC samples were examined both at the top of the drop and at the cross section by scanning electron microscopy (SEM)/energy-dispersive spectroscopy (EDS). The presence of a SiC layer as unique reaction product at the Si-Ti eutectics/GC interface, confirmed that wettability is mainly driven by reactivity. Contrarily, as nonreactive system, at the Si-Ti eutectics/SiC interface a weak dissolution of SiC substrate was detected.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. D.B. Miracle: Aeronautical applications of metal-matrix composites, S.D. Henry et al., eds., ASM Handbook, ASM International, Materials Park, OH, 2001.10.31399/asm.hb.v21.a0003485 ↗
2. X. Zhang, Y. Chen, and J. Hu: Progr. Aero. Sci., 2018, vol. 97, pp. 22–34.10.1016/j.paerosci.2018.01.001 ↗
3. H. Singh, S.J. Nrip, and A.K. Tyagi: J. Eng. Res. Stud., 2011, vol. 2, pp. 72–78.
4. Ž. Gnjidić, D. Božić, and M. Mitkov: Mater. Charact., 2001, vol. 47, pp. 129–38.10.1016/S1044-5803(01)00161-9 ↗
5. J.N. Ness and T.F. Page: J. Mater. Sci., 1986, vol. 21, pp. 1377–97.10.1007/BF00553278 ↗
6. A.J. Whitehead and T.F. Page: J. Mater. Sci., 1992, vol. 27, pp. 839–52.10.1007/BF02403904 ↗
7. M. Caccia and J. Narciso: Ceram. Trans., 2015, vol. 245, pp. 15–252.
8. M. Caccia and J. Narciso: Mater. Sci. Forum, 2014, vol. 783, pp. 1863–66.10.4028/www.scientific.net/MSF.783-786.1863 ↗
9. N.R. Calderon, M. Martinez-escandell, J. Narciso, and F. Rodriguez-reinoso: J. Am. Ceram. Soc., 2010, vol. 93, pp. 1003–09.10.1111/j.1551-2916.2009.03572.x ↗
10. N.R. Calderon, M. Martinez-escandell, J. Narciso, and F. Rodriguez-Reinoso: Carbon, 2009, vol. 47, pp. 2200–10.10.1016/j.carbon.2009.04.002 ↗
11. O. Dezellus, S. Jacques, F. Hodaj, and N. Eustathopoulos: J. Mater. Sci., 2005, vol. 40, pp. 2307–11.10.1007/s10853-005-1950-7 ↗
12. R. Voytovych, V. Bougiouri, N.R. Calderon, J. Narciso, and N. Eustathopoulos: Acta Mater., 2008, vol. 56, pp. 2237–46.10.1016/j.actamat.2008.01.011 ↗
13. M. Caccia, C. Xiang, J. Narciso, and N. Gupta: Ceram. Int., 2018, vol. 44, pp. 13182–90.10.1016/j.ceramint.2018.04.143 ↗
14. O.C. Esteban, M. Caccia, A. Camarano, and J. Narciso: Ceramic Transactions, John Wiley & Sons, New York, NY, 2017.
15. A. Camarano, M. Caccia, J.M. Molina, and J. Narciso: Ceram. Int., 2016, vol. 42, pp. 10726–10733.10.1016/j.ceramint.2016.03.196 ↗
16. Y. Tong, S. Bai, X. Liang, Q.H. Qin, and J. Zhai: Ceram. Int., 2016, vol. 42, pp. 17174–17178.10.1016/j.ceramint.2016.08.007 ↗
17. A. Ortona, T. Fend, H.W. Yu, K. Raju, and D.H. Yoon: J. Eur. Ceram. Soc., 2014, vol. 34, pp. 1131–38.10.1016/j.jeurceramsoc.2013.10.037 ↗
18. S.T. Mileiko: Compr. Compos. Mater., 2000, vol. 4 pp. 265–87.10.1016/B0-08-042993-9/00129-7 ↗
19. D. Kopeliovich: Adv. Ceram. Matrix Comp., 2014, vol. 5, pp. 79–108.10.1533/9780857098825.1.79 ↗
20. M.H. Hon and R.F. Davis: J. Mater. Sci., 1979, vol. 14, pp. 2411–21.10.1007/BF00737031 ↗
21. P. Eveno, J. Li, A.M. Huntz, and J. Chaumont: Mater. Sci. Eng. B, 1992, vol. 11, pp. 331–36.10.1016/0921-5107(92)90235-2 ↗
22. J.F. White, L. Ma, K. Forwald, and D. Sichen: Metall. Mater. Trans. B, 2013, vol. 45B, pp. 150–60.
23. G.S. Corman and K.L. Luthra: in Handbook of Ceramic Composites, N.P. Bansal, ed., Springer, Boston, MA, 2005, pp. 99–115.
24. A.A. Galiguzov, A.M. Kenigfest, A.P. Malakho, A.N. Seleznev, and V.V. Avdeev: Fibre Chem., 2012, vol. 44, pp. 101–05.10.1007/s10692-012-9407-7 ↗
25. B. Drevet and N. Eustathopoulos: J. Mater. Sci., 2012, vol. 47, pp. 8247–60.10.1007/s10853-012-6663-0 ↗
26. J.F. Narciso-Romero and R. Arpón-Carballo: J. Ceram. Soc. Jpn., 2000, vol. 108, pp. 957–59.10.2109/jcersj.108.1263_957 ↗
27. D.Y. Oh, H.C. Kim, J.K. Yoon, I. Ko, and I.J. Shon: J. Alloys Compd., 2005, vol. 395, pp. 174–80.10.1016/j.jallcom.2004.10.072 ↗
28. T. Tsunoura, K. Yoshida, T. Yano, T. Aoki, and T. Ogasawara: J. Am. Ceram. Soc., 2019, pp. 1–13.
29. A. Camarano, M. Caccia, J.M. Molina, and J. Narciso: Ceram. Int., 2016, vol. 42, pp. 10726–10733.10.1016/j.ceramint.2016.03.196 ↗
30. M.A. Nicolet and S.S. Lau: VLSJ Electronics: Microstructure Science, N.G. Einspruch and G.B. Larrabee, eds., Academic Press, New York, NY, 1983, vol. 6.
31. L. Krusin-Elbaum, J.Y.C. Sun, and C. Yu Ting: IEEE Trans. Elect. Dev., 1987, vol. 34, pp. 58–63.10.1109/T-ED.1987.22885 ↗
32. R. Novakovic, D. Giuranno, M. Caccia, S. Amore, R. Nowak, N. Sobczak, J. Narciso, and E. Ricci: J. Mol. Liq., 2016, vol. 221, pp. 346–53.10.1016/j.molliq.2016.05.084 ↗
33. M. Caccia, S. Amore, D. Giuranno, R. Novakovic, E. Ricci, and J. Narciso: J. Eur. Ceram. Soc., 2015, vol. 35, pp. 4099–4106.10.1016/j.jeurceramsoc.2015.07.016 ↗
34. B.J. Keene: Surf. Int. Anal., 1987, vol. 10, pp. 367–83.10.1002/sia.740100802 ↗
35. V.L. Yupko and G. Gnesin: Sov. Powder Metall. Met. Ceram., 1974, vol. 13, pp. 59–61.10.1007/BF00790688 ↗
36. D. Giuranno, N. Sobczac, G. Bruzda, R. Nowak, W. Polkowski, A. Kudyba, A. Polkowska, and R. Novakovic: J. Mater. Eng. Perform., 2019.10.1007/s11665-019-04141-9 ↗
37. N. Eustathopoulos, N. Sobczak, A. Passerone, and K. Nogi: J. Mater. Sci., 2005, vol. 40, pp. 2271–80.10.1007/s10853-005-1945-4 ↗
38. T.B. Massalski: Binary Alloy Phase Diagrams, ASM, Metals Park, OH, 1986, vols. 1–2.
39. D. Giuranno, S. Delsante, G. Borzone, and R. Novakovic: J. Alloys Compd., 2016, vol. 689, pp. 918–30.10.1016/j.jallcom.2016.08.035 ↗
40. M. Naikadea, B. Fankhänel, L. Weber, A. Ortona, M. Stelter, and T. Graule: J. Eur. Ceram. Soc., 2019, vol. 39, pp. 735–42.10.1016/j.jeurceramsoc.2018.11.049 ↗
41. L. Liggieri and A. Passerone: High Technol., 1989, vol. 7, pp. 80–86.
42. N. Sobczak, R. Nowak, W. Radziwill, J. Budzioch, and A. Glenz: Mater. Sci. Eng. A, 2008, vol. 495, pp. 43–49.10.1016/j.msea.2007.11.094 ↗
43. O. Knacke, O. Kubashewski, and K. Hesselmann: Thermochemical Properties of Inorganic Substances, 2nd ed., Springer Verlag, Düsseldorf, 1991.
44. D. Giuranno, F. Gnecco, E. Ricci, and R. Novakovic: Intermetallics, 2003, vol. 11, pp. 1313–17.10.1016/S0966-9795(03)00173-0 ↗
45. R. Novakovic, E. Ricci, D. Giuranno, T. Lanata, and S. Amore: Calphad: Comput. Coupl. Phase Diagr. Thermochem., 2009, vol. 33, pp. 69–75.10.1016/j.calphad.2008.09.002 ↗
46. D. Giuranno, A. Tuissi, R. Novakovic, and E. Ricci: J. Chem. Eng. Data, 2010, vol. 55, pp. 3024–28.10.1021/je901055j ↗
47. E. Ricci, S. Amore, D. Giuranno, R. Novakovic, A. Tuissi, N. Sobczak, R. Nowak, B. Korpala, and G. Bruzda: J. Chem. Phys., 2014, vol. 140 (214704), pp. 1–6.
48. R. Novakovic, D. Giuranno, E. Ricci, A. Tuissi, R. Wunderlich, H.-J. Fecht, and I. Egry: App. Surf. Sci., 2012, vol. 258, pp. 3269–75.10.1016/j.apsusc.2011.11.080 ↗
49. J. Brillo, G. Lauletta, L. Vaianella, E. Arato, D. Giuranno, R. Novakovic, and E. Ricci: ISIJ Int., 2014, vol. 54, pp. 2115–19.10.2355/isijinternational.54.2115 ↗
50. R. Novakovic, E. Ricci, D. Giuranno, and A. Passerone: Surf. Sci., 2005, vol. 576, pp. 175–87.10.1016/j.susc.2004.12.009 ↗
51. B. Drevet and N. Eustathopoulos: J. Mater. Sci., 2012, vol. 47, pp. 8247–60.10.1007/s10853-012-6663-0 ↗
52. J.J Biernacki and G.P. Wotzak: J. Am. Ceram. Soc., 1989, vol. 72, pp. 122–29.10.1111/j.1151-2916.1989.tb05964.x ↗
53. G.W. Liu, M.L. Muolo, F. Valenza, and A. Passerndone: Ceram. Int., 2010, vol. 36, pp. 1177–88.10.1016/j.ceramint.2010.01.001 ↗
54. O. Dezellus, F. Hodaj, and N. Eustathopoulos: Acta Mater., 2002, vol. 50, pp. 4741–53.10.1016/S1359-6454(02)00309-9 ↗
55. R. Voytovych, R. Israel, N. Calderon, F. Hodaj, and N. Eustathopoulos: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 3825–35.10.1016/j.jeurceramsoc.2012.05.020 ↗
56. D. Bandyopadhyay: J. Phase Equil. Diff., 2004, vol. 25, pp. 415-20.10.1007/s11669-004-0132-7 ↗
57. D. Giuranno, E. Ricci, E. Arato, and P. Costa: Acta Mater., 2006, vol. 54, pp. 2625–30.10.1016/j.actamat.2006.02.005 ↗
58. D. Giuranno, E. Arato, and E. Ricci: Chem. Eng. Trans., 2001, vol. 24, pp. 571–76.
59. M. Ratto, E. Ricci, and E. Arato: J. Cryst. Growth, 2000, vol. 217, pp. 233–49.10.1016/S0022-0248(00)00496-6 ↗
60. T. Iida and R.I.L. Guthrie: The Physical Properties of Liquid Metals, Clarendon Press, Oxford, United Kingdom, 1993.
61. W. Polkowski, N. Sobczak, G. Bruzda, R. Nowak, D. Giuranno, A. Kudyba, A. Polkowska, K. Pajor, T. Kozieł, and I. Kaban: J. Mater. Eng. Perform., 2019, vol. 28, pp. 3819–25.10.1007/s11665-018-3786-8 ↗
62. N. Eustathopoulos and B. Drevet: J. Cryst. Growth, 2013, vol. 371, pp. 77–83.10.1016/j.jcrysgro.2013.02.010 ↗