journal article·2019-10-15Open access

Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method

Balaji Narayanaswamy, Alireza Ghaderi, Peter Hodgson, Pavel Cizek, Qi Chao, Mohammad Safi, Hossein Beladi

Abstract

A high-strain scratch tester was employed to investigate the abrasive behavior of four different ferrous microstructures with similar bulk hardness levels. The microstructures revealed unique groove characteristics and significant deformation in their sub-surface layers. Bainite and pearlite displayed superior abrasive wear performance in comparison with martensite and tempered martensite microstructures. The characteristics of microstructure constituents were responsible for the distinct groove characteristics and material removal mechanisms. The effect of normal load was influential in the transition of the material removal mechanism from ploughing to cutting. The sub-surface layer of microstructures revealed significant deformation (i.e., nanostructure formation), which was largely determined by the initial microstructure characteristics. The occurrence of work-hardening phenomenon in the sub-surface layer demonstrated a positive impact during abrasion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. B. Bhushan: Introduction to tribology, 2nd ed. Wiley, New York, 2013, pp. 328–340.10.1002/9781118403259 ↗
2. W.A. Glaeser, C.R. Brundle and C.A. Evans: Characterization of Tribological Materials, 2nd edn. Momentum Press, New York, 2010, pp. 80-83.
3. J.A. Hawk and R.D. Wilson: Tribology of Earthmoving, Mining, and Minerals Processing, CRC Press LLC, Florida, 2001, pp. 1331-1370.
4. I.M. Hutchings: Tribology: friction and wear of engineering materials, Butterworth-Heinemann Ltd, Great Britain, 1992, pp. 133-135.
5. K.-H. Gahr: Proc. Conf. Wear Mater., ASME. 1979, pp. 266 – 274.
6. M. Moore: Wear, 1974, vol. 28, pp. 59-68.10.1016/0043-1648(74)90101-X ↗
7. P. Mutton and J. Watson: Wear, 1978, vol. 48, pp. 385-398.10.1016/0043-1648(78)90234-X ↗
8. N. Serpik and M. Kantor: Metalloved. Obrab. Met.,1958, vol. 7, pp. 46-50.
9. K.H. ZumGahr (1987) Microstructure and Wear of Materials. Elsevier Science Publishers, Amsterdam, pp. 392-417.
10. J. Larsen-Badse and K. Mathew: Wear, 1969, vol. 14, pp. 199-205.10.1016/0043-1648(69)90041-6 ↗
11. R. Richardson: Wear, 1967, vol. 10, pp. 291-309.10.1016/0043-1648(67)90093-2 ↗
12. M.M. Khruschov: Proc. Conf. Lubrication and Wear, Institution of Mechanical Engineers, 1957, pp. 655–59.
13. M. M. Khruschov: Wear, 1974, vol. 28, pp. 69-88.10.1016/0043-1648(74)90102-1 ↗
14. M. M. Khruschov and M. A. Babichev: Fric. Wear Mach., 12, 1958, pp. 5-23.
15. E. Rabinowicz, L. A. Dunn and P. G. Russel: Wear, 1961, vol. 4, pp. 345-355.10.1016/0043-1648(61)90002-3 ↗
16. A. Misra and I. Finnie: Wear, 1981, vol. 68, pp. 33-39.10.1016/0043-1648(81)90017-X ↗
17. J. Larsen-Badse: Trans. Metall. Soc., 1996, vol. 236, pp 1461-1466.
18. J. Larsen-Badse: Wear, 1968, vol. 12, pp. 357-368.10.1016/0043-1648(68)90538-3 ↗
19. K. Wellinger, H. Uetz and M. Gürleyik: Wear, 1968, vol. 11, pp. 173-199.10.1016/0043-1648(68)90557-7 ↗
20. H. Çimenoǧlu: Wear, 1997, vol. 210, pp. 204-210.10.1016/S0043-1648(97)00051-3 ↗
21. N. Dube and I. Hutchings: Wear, 1999, vol. 233, pp. 246-56.10.1016/S0043-1648(99)00297-5 ↗
22. J. Larsen-Basse: Scripta Metallurgica et Materialia, 1990, vol. 24, pp. 821-826.10.1016/0956-716X(90)90119-2 ↗
23. S. Mezlini, M. Zidi, H. Arfa, M.B. Tkaya and P. Kapsa: Comptes Rendus Mecanique, 2005, vol. 333, no. 11, pp. 830-837.10.1016/j.crme.2005.09.005 ↗
24. O. Modi, D. Mondal, B. Prasad, M. Singh and H. Khaira: Mater. Sci. Eng. A, 2003, vol. 343, pp. 235-242.10.1016/S0921-5093(02)00384-2 ↗
25. B. Prasad and S. Prasad: Wear, 1991, vol. 151, pp. 1-12.10.1016/0043-1648(91)90341-Q ↗
26. S.D. Bakshi, P. Shipway and H. Bhadeshia: Wear, 2013, vol. 308, pp. 46-53.10.1016/j.wear.2013.09.008 ↗
27. B. Narayanaswamy, P. Hodgson and H. Beladi: Wear, 2016, vol. 354-355, pp. 41-52.10.1016/j.wear.2016.03.001 ↗
28. D. Rigney, L. Chen, M.G. Naylor and A. Rosenfield: Wear, 1984, vol. 100, pp. 195-219.10.1016/0043-1648(84)90013-9 ↗
29. A. Mercer and I. Hutchings: Wear, 1989, vol. 132, pp. 77-97.10.1016/0043-1648(89)90204-4 ↗
30. A. Misra and I. Finnie: Wear, 1981, vol. 65, pp. 359-373.10.1016/0043-1648(81)90062-4 ↗
31. M. Moore: Wear Mater., 1983, pp. 1–11.
32. E. Rabinowicz and A. Mutis: Wear, 1965, vol. 8, pp. 381-390.10.1016/0043-1648(65)90169-9 ↗
33. B. Narayanaswamy, P. Hodgson and H. Beladi: Wear, 2016, vol. 354, pp. 41-52.10.1016/j.wear.2016.03.001 ↗
34. X. Xu, S. van der Zwaag and W. Xu: Wear, 2017, vol. 385, pp. 106-113.10.1016/j.wear.2017.05.009 ↗
35. J.I. Pereiraa, G. Tressiaa, P.C. Machadoa, L.A. Francoa and A. Sinatora: Tribol. Int., 2018, vol. 128, pp. 337-348.10.1016/j.triboint.2018.07.040 ↗
36. R. Ghasemi, L. Elmquist, E. Ghassemali, K. Salomonsson and A.E.W. Jarfors: Tribol. Int., 2018, vol. 120, pp. 465-475.10.1016/j.triboint.2017.12.046 ↗
37. X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 358, pp. 80-88.
38. T.A. Adler and R.P. Walters: Wear, 1993, vol. 162–164, pp. 713–720.10.1016/0043-1648(93)90071-S ↗
39. K.-H. ZumGahr and D.V. Doane: Metall. Trans. A, 1980, vol. 11, pp. 613-620.10.1007/BF02670698 ↗
40. M. Woldman, E. Van Der Heide, T. Tinga and M.A. Masen: Wear, 2013, vol. 301, pp. 76-81.10.1016/j.wear.2012.12.009 ↗
41. X. Xu, S. van der Zwaag and W. Xu: Wear, 2015, vol. 322, pp. 51-60.10.1016/j.wear.2014.10.011 ↗
42. ASTM E407-07(2015)e1, Standard Practice for Microetching Metals and Alloys, ASTM International, West Conshohocken, PA, 2015. https://www.astm.org/Standards/E407. Accessed 9 June 2019.
43. A. Ghaderi, G. Saha,, T. Guo, D. Fabijanic and M. R. Barnett: Wear, 2018, vol. 404, pp. 53-165.
44. K.J. Hume: A history of engineering metrology, Mechanical Engineering Publications, London, 1980, pp. 152-156.
45. J.A. Williams: Tribol. Int., 1996, vol. 29, pp. 675-694.10.1016/0301-679X(96)00014-X ↗
46. C. A. Brookes, P. Green, P. H. Harrison and B. Moxley: J. Phys. D: Appl. Phys., 1972, vol. 5, pp. 1284-1293.10.1088/0022-3727/5/7/313 ↗
47. T.A. Adler, and R. P. Walters: Wear, 1993, vol. 162-164, pp. 713-20.10.1016/0043-1648(93)90071-S ↗
48. K. Hokkirigawa and K. Kato: Wear, 1988, vol. 21, pp. 51-57.
49. F. Pöhl, C. Hardes and W. Theisen: Wear, 2019, vol. 422, pp. 212-222.10.1016/j.wear.2019.01.073 ↗
50. K. Hokkirigawa and K. Kato: Wear, 1988, vol. 123, pp. 241-251.10.1016/0043-1648(88)90102-0 ↗
51. X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 348, pp. 148-157.10.1016/j.wear.2015.12.005 ↗
52. X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 348, pp. 80-88.
53. H.K.D.H. Bhadeshia: Bainite in steels, 2nd ed., Inst. of Materials, Great Britain, 1992, pp. 19-26.
54. L. Chang: Wear, 2005, vol. 258, pp. 730-743.10.1016/j.wear.2004.09.064 ↗
55. C. Garcia-Mateo, F. Caballero, J. Chao, C. Capdevila and C.G. De Andres: J. Mater. Sci., 2009, vol. 44, pp. 4617-4624.10.1007/s10853-009-3704-4 ↗
56. A. Leiro, A. Kankanala, E. Vuorinen and B. Prakash: Wear, 2011, vol. 273, pp. 2-8.10.1016/j.wear.2011.03.025 ↗
57. B. Narayanaswamy, P. Hodgson, I. Timokhina and H. Beladi: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4883-4895.10.1007/s11661-016-3690-5 ↗
58. E.Vuorinen, N.Ojala, V.Heino, C.Rau and C.Gahm: Tribol. Int., 2016, vol. 98, pp. 108-115.10.1016/j.triboint.2016.02.015 ↗
59. Y.J. Li, P. Choi, C. Borchers, S. Westerkamp, S. Goto, D. Raabe and R. Kirchheim: Acta Mater., 2011, vol. 59, pp. 3965-3977.10.1016/j.actamat.2011.03.022 ↗
60. Y.J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe and R. Kirchheim: Acta Mater., 2012. vol. 60, pp. 4005-4016.10.1016/j.actamat.2012.03.006 ↗
61. Kati Valtonena, Niko Ojalaa, Oskari Haikoc and Veli-Tapani Kuokkalaa: Wear, 2019, vol. 426, pp. 3-13.10.1016/j.wear.2018.12.006 ↗