Crystallography of Martensite in Friction-Stir-Welded 12Cr Heat-Resistant Steel
Source abstract
Abstract
In this work, electron backscatter diffraction (EBSD) was applied for examination of the crystallography of the martensitic structure produced during friction-stir welding (FSW) of 12Cr heat-resistant steel. The martensitic transformation was found to be governed by the Kurdjumov–Sachs (K-S) relation, viz. {111}γ || {110}α′ and 〈110〉γ || 〈111〉α′, was characterized by substantial variant selection and led to considerable orientation spread within the martensite variants. Due to the latter effect, the K-S model was found to be ineffective for the reconstruction of prior-austenite grain structure. Instead, the mixed orientation relation, viz. {111}γ || {110}α′, 〈110〉γ || 〈111〉α′, and 〈112〉γ || 〈110〉α′, was shown to be more suitable for this purpose.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. F. Abe, T.U. Kern, and R. Viswanathan: Creep-Resistant Steels, Woodhead Publishing Limited, Cambridge, United Kingdom, 2008, pp. 26–42.10.1533/9781845694012 ↗
2. K. Maruyama, K. Sawada, and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
3. F. Abe: J. Press. Vessel Technol., 2016, vol. 138, p. 04080410.1115/1.4032372 ↗
4. J.P. Fernandes, E.M.D. Lopes, and V. Maneta: J. Eng. Gas Turb. Power, 2010, vol. 132, p. 05180110.1115/1.3204563 ↗
5. F. Abe: Development of Creep-Resistant Steels and Alloys for Use in Power Plants, Woodhead Publishing Limited, Cambridge, United Kingdom, 2014, pp. 250–93.
6. H. Cerjak, P. Hofer, and B. Schaffernak: ISIJ Int., 1999, vol. 39, pp. 874–88.10.2355/isijinternational.39.874 ↗
7. J. Onoro: Int. J. Pres. Ves. Pip., 2006, vol. 83, pp. 540–45.10.1016/j.ijpvp.2006.03.005 ↗
8. J. Onoro: J. Mater. Proc. Technol., 2006, vol. 180, pp. 137–4210.1016/j.jmatprotec.2006.05.014 ↗
9. B. Rivolta, F. Tavasci, R. Gerosa, and J. Yenus: Mater. Perform. Charact., 2017, vol. 6, pp. 160–73.10.1520/MPC20150054 ↗
10. E. Taban, A. Dhooge, and E. Kaluc: Mater. Manufac. Proc., 2009, vol. 24, pp. 649–56.10.1080/10426910902769152 ↗
11. K. Fujiyama, K. Mori, T. Matsugana, H. Kimachi, T. Saito, T. Hino, and R. Ichii: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 195–20110.1016/j.msea.2008.08.045 ↗
12. R.M. Hunt, B. El-Dasher, B.W. Choi, and S.G. Torres: Fus. Eng. Des., 2014, vol. 89, pp. 1617–22.10.1016/j.fusengdes.2014.04.046 ↗
13. W.M. Thomas, C.S. Wiesner, D.J. Marks, and D.G. Staines: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 247–53.10.1179/136217109X415893 ↗
14. P. Hua, S. Mironov, C.Z. Nie, Y.S. Sato, H. Kokawa, S.H.C. Park, and S. Hirano: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 76–81.10.1179/1362171813Y.0000000167 ↗
15. Y.S. Sato, H. Kokawa, H.T. Fujii, Y. Yano, and Y. Sekio: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5789–5800.10.1007/s11661-015-3152-5 ↗
16. Y. Yano, Y.S. Sato, Y. Sekio, S. Ohtsuka, T. Kaito, R. Ogawa, and H. Kokawa: J. Nucl. Mater., 2013, vol. 442, pp. S524–S528.10.1016/j.jnucmat.2012.10.038 ↗
17. F.C. Liu, Y. Hovanski, M.P. Miles, C.D. Sorensen, and T.W. Nelson: J. Mater. Sci. Technol., 2018, vol. 34, pp. 39–57.10.1016/j.jmst.2017.10.024 ↗
18. C. Zhang, L. Cui, D. Wang, Y. Liu, and H. Li: Mater. Sci. Eng. A, 2018, vol. 729, pp. 257–67.10.1016/j.msea.2018.05.043 ↗
19. Y.H. Guo, Y.Q. Chang, J. Zhang, J.Z. Lic, S. Ukai, and F.R. Wan: Sci. Technol. Weld. Join., 2018, vol. 23, pp. 50–57.10.1080/13621718.2017.1392075 ↗
20. H. Dawson, M. Serrano, R. Hernandez, S. Cater, and E. Jimenez-Melero: Mater. Sci. Eng. A, 2017, vol. 693, pp. 84–92.10.1016/j.msea.2017.03.090 ↗
21. A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedstrom, and A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265–74.10.1016/j.actamat.2012.09.046 ↗
22. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamoto: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
23. H. Kitahara, R. Ueji, M. Ueda, N. Tsuji, and Y. Minamoto: Mater. Character., 2005, vol. 54, pp. 378–86.10.1016/j.matchar.2004.12.015 ↗
24. B. Sonderegger, S. Mitsche, and H. Cerjak: Mater. Charact., 2007, vol. 58, pp. 874–82.10.1016/j.matchar.2006.08.014 ↗
25. N. Gey and M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–87.10.1016/S1359-6454(01)00351-2 ↗