Designing a Novel Graphitic White Iron for Metal-to-Metal Wear Systems
Source abstract
Abstract
Metal-to-metal wear systems are widely used in various industries, but heat-induced adhesive wear has been limiting the lifetime of the components for many years. An idea of introducing interconnected flake graphite networks into white iron was developed by the authors, which can potentially solve this problem by increasing the overall thermal conductivity. To optimize the thermal conductivity and wear resistance, five alloys with different chromium and carbon contents were designed, produced, and investigated to develop the first generation of graphitic white iron. Mathematical models were developed to correlate the graphite phase concentration and cooling rate with carbon equivalent. It was shown that graphite volume percent needs to be higher than 7 pct to have a consistent thermal conductivity increase. Hardness model developed in this article suggested that M7C3 has a higher hardness than the plate cementite, and hardness increases with increasing chromium content in the carbides. The as-solidified microstructure was characterized using a SEM, and solidification sequence was established for this novel alloy system. Unexpectedly, for the first time, study of alloy with 11 wt pct Cr shows that M7C3 was formed during eutectic reaction and then transformed into cementite at a lower temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. D. M. Stefanescu: ASM Handbook, 10th ed., ASM International, Ohio, 1990, pp. 3-11.
2. [2] H. Berns and W. Theisen: Ferrous Materials, 1st ed., Springer- Verlag Berlin Heidelberg, 2008, pp. 103.
3. R. B. Gundlach: ASM Handbook, ASM International, Ohio, 2008, pp. 896-903.
4. [4] M. Mohammadnezhad, V. Javaheri, M. Shamanian, M. Naseri and M. Bahrami: Materials & Design, 2013, vol. 49, pp. 888-893.10.1016/j.matdes.2013.02.043 ↗
5. [5] M. Filipovic, Z. Kamberovic and M. Korac: Materials Transactions, 2011, vol. 52, pp. 386-390.10.2320/matertrans.M2010059 ↗
6. [6] A. Bedolla-Jacuinde, M. W. Rainforth and I. Mejia: Metall. Trans. A, 2013, vol 44, pp. 856-872.10.1007/s11661-012-1434-8 ↗
7. [7] Z. F. Huang, J. D. Xing, X. H. Zhi and Y. M. Gao: Materials Science and Technology, 2014, vol. 27, pp. 426-430.10.1179/026708309X12601952777666 ↗
8. W.T. Yu, J. Li, C.B. Shi, and Q.T. Zhu: Metals, 2016, vol. 6, art. no. 193.10.3390/met6080193 ↗
9. [9] X. H. Zhi, J. D. Xing, H. G. Fu and Y. M. Gao: Materials Characterization, 2008, vol. 59, pp. 1221-1226.10.1016/j.matchar.2007.10.010 ↗
10. [10] A. Bedolla-Jacuinde, R. Correa, J. G. Quezada and C. Maldonado: Materials Science and Engineering A, 2005, vol. 398, pp. 297-308.10.1016/j.msea.2005.03.072 ↗
11. [11] X. J. Wu, J. D. Xing, H. G. Fu and X. H. Zhi: Materials Science and Engineering A, 2007, vol. 457, pp. 180-185.10.1016/j.msea.2006.12.006 ↗
12. [12] M. E. Maja, M. G. Maruma, L. A. Mampuru and S. J. Moema: Journal of the Southern African Institute of Mining and Metallurgy, 2016, vol. 116, pp. 981-986.10.17159/2411-9717/2016/v116n10a14 ↗
13. Annual Book of ASTM Standards, ASTM Designation A247-17, ASTM, 2017.
14. C. V. White: Metals Handbook, 10th ed., ASM International, Ohio, 1990, pp. 12-32.
15. [15] W. L. Guesser, I. Masiero, E. Melleras and C. S. Cabezas: Revista Materia, 2005, vol. 10, pp. 265-272.
16. [16] D. Holmgren: International Journal of Cast Metals Research, 2013, vol. 18, pp. 331-345.10.1179/136404605225023153 ↗
17. [17] I. G. Chen and D. M. Stefanescu: AFS Transaction, 1984, vol. 92, pp. 947-964.
18. [18] J. M. Frost and D. M. Stefanescu: AFS Transaction, 1992, vol. 100, pp. 189-200.
19. [19] D. Emadi, L. V. Whiting, S. Nafisi and R. Ghomashchi: Journal of Thermal Analysis and Calorimetry, 2005, vol. 81, pp. 235-242.10.1007/s10973-005-0772-9 ↗
20. [20] A. Gaard, N. Hallback, P. Krakhmalev and J. Bergstrom: Wear, 2010, vol. 268, pp. 968-975.10.1016/j.wear.2009.12.007 ↗
21. [21] P. C. Okonkwo, G. Kelly, B. F. Rolfe and M. P. Pereira: Wear, 2012, vol. 282-283, pp. 22-30.10.1016/j.wear.2012.01.017 ↗
22. [22] J. Krawczyk and J. Pacyna: Metallurgy and Foundry Engineering, 2009, vol. 35, pp. 101-110.10.7494/mafe.2009.35.2.101 ↗
23. J. Krawczyk and J. Pacyna: 18th International Conference on Metallurgy and Materials, 2009, pp. 19–21.
24. [24] J. Krawczyk and J. Pacyna: Archives of Foundry Engineering, 2010, vol. 10, pp. 45-50.
25. [25] J. J. Coronado, A. Gomez and A. Sinatora: Wear, 2009, vol. 267, pp. 2070-2076.10.1016/j.wear.2009.08.012 ↗
26. [26] J. J. Coronado and A. Sinatora: Wear, 2009, vol. 267, pp. 2077-2082.10.1016/j.wear.2009.08.011 ↗
27. J.J. Coronado, S.A. Rodriguez, C.E.K. Mady, and A. Sinatora: ABRASION 2008—Proceedings of the 3rd International Conference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills, University of Trento, Italy, 2008, pp. 212–21.
28. D. C. Van Aken and W. F. Hosford: Reporting Results: A Practical Guide for Engineers and Scientists, 1st ed., Cambridge University, Cambridge, 2008, pp. 87-91.10.1017/CBO9780511791376 ↗
29. [29] M. D. Hecht, B. A. Webler and Y. N. Picard: Metall. Trans. A, 2018, vol. 49, pp. 2161-2172.10.1007/s11661-018-4588-1 ↗
30. M. Bruneau, C.M. Uang and A. S. Whittaker: Ductile design of steel structures, 1st ed., McGraw-Hill Education, New York, 1998.
31. A. A. Zhukov: Theoretical Foundations of Graphitization of Cast Iron and Formation of Structure in Preforms, Mashinostroenie, Moscow, 1978.
32. [32] S. Q. Ma, J. D. Xing, Y. L. He, Y. F. Li, Z. F. Huang, G. Z. Liu and Q. J. Geng: Materials Chemistry and Physics, 2015, vol. 161, pp. 65-73.10.1016/j.matchemphys.2015.05.008 ↗
33. L. Sha, Y.F. Zhou, X.L. Xing, J.B. Wang, X.J. Ren, and Q.X. Yang: Sci. Rep., 2016, vol. 6, pp. 32941–46.10.1038/srep37444 ↗
34. [34] D. A. Skobir, F. Vodopivec, M. Jenko, S. Spaic and B. Markoli: Z. fur Metall., 2004, vol. 95, pp. 1020-1024.10.3139/146.018053 ↗
35. [35] A. Inoue and T. Masumoto: Metallurgical Transaction A, 1980, vol. 11, pp. 739-747.10.1007/BF02661203 ↗
36. Annual Book of ASTM Standards, ASTM Designation E92-17, ASTM, 2017.
37. [37] S. R. Wang, L. H. Song, Y. Qiao and M. Wang: Tribology Letters, 2013, vol. 50, pp. 439-448.10.1007/s11249-013-0140-z ↗
38. [38] J. J. Coronado: Wear, 2011, vol. 270, pp. 287-293.10.1016/j.wear.2010.10.070 ↗