Effects of Alloying Elements on Thermal Expansion Behavior of Ni-Fe-Cr-Based Superalloys
Source abstract
Abstract
The effects of alloying elements on the thermal expansion of Ni-Fe-Cr-based superalloys are investigated by optical microscope, scanning electron microscope, and transmission electron microscope. The results indicate that Fe and Cr increase the thermal expansion coefficient (TEC) of alloys and the effect of Cr on the TEC is significantly enhanced by the presence of Fe. Al and Ti present a minor influence on the TEC owing to their low contents in the alloys. The TEC of alloys rises with the reduction of lattice parameter of γ matrix in the Fe-containing or non-ferrous alloys; indeed, this is the essential reason why the TEC changes with the modification of the contents of various elements. Finally, it is found that the TEC of alloys is principally determined by the γ matrix due to its dominant amount. The γ′ phase and grain boundary also contribute to reducing the TEC, but their effects are screened by the matrix due to their negligible volume (or weight) fraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. S. Patel (2005) Acta Metall. Sin., vol. 18, pp. 479-488.
2. R. Viswanathan, J. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis and R. Purgert: J. Mater. Eng. Perform. 2005, vol. 14, pp. 281-292.10.1361/10599490524039 ↗
3. X. S. Xie, S. Q. Zhao, J. X. Dong, G. D. Smith and S. J. Patel: Mater. Sci. Forum, 2005, vol. 475, pp. 613-18.10.4028/www.scientific.net/MSF.475-479.613 ↗
4. R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10, pp. 81-95.10.1361/105994901770345394 ↗
5. P. D. Jablonski, J. A. Hawk, C. J. Cowen and P. J. Maziasz: JOM, 2012, vol. 64, pp. 271-279.10.1007/s11837-012-0241-4 ↗
6. D. Tytko, P. P. Choi, J. Klöwer, A. Kostka, G. Inden and D. Raabe: Acta Mater., 2012, vol. 60, pp. 1731-1740.10.1016/j.actamat.2011.11.020 ↗
7. I. Kim, B. Choi, H. Hong, J. Do and C. Jo: Mater. Sci. Eng. A, 2014, vol. 593, pp. 55-63.10.1016/j.msea.2013.11.031 ↗
8. S. Q. Zhao, X. S. Xie, G. D. Smith and S. J. Patel: Mater. Des., 2006, vol. 27, pp. 1120-1127.10.1016/j.matdes.2005.03.015 ↗
9. J. P. Shingledecker and G. M. Pharr: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1902-1910.10.1007/s11661-011-1013-4 ↗
10. C. S. Wang, Y. A. Guo, J. T. Guo and L. Z. Zhou: Mater. Des., 2015, vol. 88, pp. 790-798.10.1016/j.matdes.2015.09.098 ↗
11. P. D. Jablonski and D. E. Alman: Int. J. Hydrogen Energy, 2007, vol. 32, pp. 3705-3712.10.1016/j.ijhydene.2006.08.019 ↗
12. H. Morrow, D. Sponseller and M. Semchyshen: Metall. Trans. A, 1975, vol. 6, pp. 477-485.10.1007/BF02658405 ↗
13. M. Karunaratne, S. Kyaw, A. Jones, R. Morrell and R. C. Thomson: J. Mater. Sci., 2016, vol. 51, pp. 4213-4226.10.1007/s10853-015-9554-3 ↗
14. R. Yamamoto, Y. Kadoya, H. Kawai, R. Magoshi, T. Noda, S. Hamano, S. Ueta and S. Isobe: Mater. Adv. Power Eng.: Proc. 7th Liège Conf. (Part III), Liège, Belgium, 2002, pp. 1351–60.
15. S. Hwang, F. Hull and J. Wells: Fifth Int. Symp. Superalloys, Seven Springs, PA, 1984, pp. 785–94.10.7449/1984/Superalloys_1984_785_794 ↗
16. F. Pyczak, B. Devrient and H. Mughrabi: Superalloys 2004, 2004, pp. 827-836.10.7449/2004/Superalloys_2004_827_836 ↗
17. E. Balikci, A. Raman and R. Mirshams: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2803-2808.10.1007/s11661-999-0117-6 ↗
18. K. Sato and T. Ohno: J. Mater. Eng. Perform., 1993 vol. 2, pp. 511-516.10.1007/BF02661734 ↗
19. K.A. Heck, M.A. Moore, D.F. Smith, L.I. Stein, and J.S. Smith: US Patent 5478417, 1995.
20. D.A. Deantono and E.A. Wanner: US Patent: 5283032, 1994.
21. S. Ovsepyan, B. Lomberg, T. Grigor’eva and M. Bakradze: Metallurgist, 2013, vol. 57, pp. 623-628.10.1007/s11015-013-9779-9 ↗
22. K. Heck, D. Smith, M. Holderby and J. Smith: Superalloys 1992, 1992, pp. 217-226.
23. F. Hull, S. Hwang, J. Wells and R. Jaffee: J. Mater. Eng., 1987, vol. 9, pp. 81-92.10.1007/BF02833790 ↗
24. A. Heck, D. Smith, J. Smith, D. Wells, M. Holderby, S. Reichman, D. Duhl, G. Maurer, S. Antolovich and C. Lund: Superalloys 1988, 1988, pp. 151-160.
25. Y. Liu, L. Liu, Z. Wu, J. Li, B. Shen and W. Hu: Scr. Mater., 2010, vol. 63, pp. 359-362.10.1016/j.scriptamat.2010.04.006 ↗
26. K. Lu and M. L. Sui: Acta Metall. Mater., 1995, vol. 43, pp. 3325-3332.10.1016/0956-7151(95)00035-T ↗
27. Y. Benveniste: Int. J. Solids Struct., 1997, vol. 34, pp. 789-798.10.1016/S0020-7683(96)00063-7 ↗
28. X. Xiao, C, Yang, X. Z. Qin, Y. W. Zhou, J. T. Guo and L. Z. Zhou: Rare Met. Mater. Eng., 2017, vol. 46, pp. 1136-1142.
29. A. Kalogeridis, M. Kolbe and E. Nembach: Scr. Metall. Mater., 1994, vol. 31, pp. 1239-1242.10.1016/0956-716X(94)90583-5 ↗
30. D. B. Sirdeshmukh, L. Sirdeshmukh and K. G. Subhadra: Micro- and Macro-Properties of Solids, Springer, New York, 2006, pp. 37-75.
31. M. Nathal, R. MacKay and R. Garlick: Mater. Sci. Eng., 1985, vol. 75, pp. 195-205.10.1016/0025-5416(85)90189-2 ↗
32. R.M. Levy: Principles of Solid State Physics, Elsevier, Amsterdam, 2012, pp. 74–79, 141–144.
33. Y. Long, Q. K. Li and W. J. Qiang: Physical Properties of Materials, Central South University Press, Changsha, China, 2009, pp. 18-19.
34. G. Ventura and M. Perfetti: Thermal properties of solids at room and cryogenic temperatures, Springer, New York, 2014, pp. 81-91.10.1007/978-94-017-8969-1_4 ↗
35. J. J. Liang, H. Wei, Y. L. Zhu, X. F. Sun, Z. Q. Hu, M. S. Dargusch and X. Yao: J. Mater. Sci., 2011, vol. 46, pp. 500-508.10.1007/s10853-010-4953-y ↗
36. P. Sung and D. Poirier: Mater. Sci. Eng. A, 1998, vol. 245, pp. 135-141.10.1016/S0921-5093(97)00699-0 ↗
37. D. Grose and G. Ansell: Metall. Mater. Trans. A, 1981, vol. 12, pp. 1631-1645.10.1007/BF02643569 ↗
38. S. Ma, D. Brown, M. A. M. Bourke, M. R. Daymond and B. S. Majumdar: Mater. Sci. Eng. A, 2005, vol. 399, pp. 141-153.10.1016/j.msea.2005.02.034 ↗
39. G. X. Hu, X. Cai and Y. H. Rong: Fundamentals of Materials and Science, Shanghai Jiao Tong University Press, Shanghai, China, 2010, pp. 85-86.