The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density
Source abstract
Abstract
The Al/W ratio was increased in a new polycrystalline γ/γ′ Co-based superalloy in order to introduce a grain boundary pinning phase while at the same time reducing the density and increasing the oxidation resistance. The grain boundary pinning phase was identified as β-phase (B2-(Ni,Co)Al) by high-energy X-ray diffraction. The grain boundary pinning effect was confirmed to be effective up to temperatures of 1050 °C by synchrotron radiation in-situ heating experiments. The precipitation of the β phase led to a reduced γ′ volume fraction thereby decreasing the high-temperature strength. The density was lowered to 8.52 g/cm3, so the specific strength was equivalent to the strength of the reference alloy up to 750 °C. Due to the low γ′ volume fraction and the low W content, the creep resistance was also reduced compared with the reference alloy. The oxidation resistance, however, was improved by the formation of a thin, continuous Al-oxide layer during oxidation at 900 °C for 50 hours.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A. Suzuki, G.C. DeNolf, and T.M. Pollock: Scr. Mater., 2007, vol. 56, pp. 385–8.10.1016/j.scriptamat.2006.10.039 ↗
2. S. Neumeier, L.P. Freund, and M. Göken: Scr. Mater., 2015, vol. 109, pp. 104–7.10.1016/j.scriptamat.2015.07.030 ↗
3. Y. Desvalleés, M. Bouzidi, F. Bois, and N. Beaude: in Proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., The Minerals, Metals and Materials Society, Warrendale, 1994, pp. 281–91.10.7449/1994/Superalloys_1994_281_291 ↗
4. G. Sjoberg, N.G. Ingesten, and E.A. Loria: in Superalloys 718, 625, 706 and Various Derivatives: Proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals and Materials Society, Warrendale, 1991, pp. 603–20.10.7449/1991/Superalloys_1991_603_620 ↗
5. D. Huenert, M. Proebstle, A. Casanova, R. Schluetter, R. Krakow, M. Buescher, P. Randelzhofer, A. Evans, K. Loehnert, T. Witulski, S. Neumeier, and C. Rae: in Proceedings of the 13th International Symposium on Superalloys, The Minerals, Metals and Materials Society, Warrendale, 2016, pp. 783–92.
6. L.P. Freund, A. Stark, F. Pyczak, N. Schell, M. Göken, and S. Neumeier: J. Alloys Compd., 2018, vol. 753, pp. 333–42.10.1016/j.jallcom.2018.04.204 ↗
7. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Mater. Trans., 2008, vol. 49, pp. 1474–9.10.2320/matertrans.MER2008073 ↗
8. S. Meher, L.J. Carroll, T.M. Pollock, and M.C. Carroll: Scr. Mater., 2016, vol. 113, pp. 185–9.10.1016/j.scriptamat.2015.10.039 ↗
9. S. Meher, H.-Y. Yan, S. Nag, D. Dye, and R. Banerjee: Scr. Mater., 2012, vol. 67, pp. 850–3.10.1016/j.scriptamat.2012.08.006 ↗
10. M. Knop, P. Mulvey, F. Ismail, A. Radecka, K.M. Rahman, T.C. Lindley, B.A. Shollock, M.C. Hardy, M.P. Moody, T.L. Martin, P.A.J. Bagot, and D. Dye: JOM, 2014, vol. 66, pp. 2495–501.10.1007/s11837-014-1175-9 ↗
11. C.A. Stewart, R.K. Rhein, A. Suzuki, T.M Pollock, and C.G. Levi: in Proceedings of the 13th International Symposium on Superalloys, The Minerals, Metals and Materials Society, Warrendale, 2016, pp. 991–99.10.1002/9781119075646.ch105 ↗
12. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: NIH Image to ImageJ. https://www.nature.com/articles/nmeth.2089, (accessed 5 March 2018).
13. P. Staron, T. Fischer, T. Lippmann, A. Stark, S. Daneshpour, D. Schnubel, E. Uhlmann, R. Gerstenberger, B. Camin, W. Reimers, E. Eidenberger, H. Clemens, N. Huber, and A. Schreyer: Adv. Eng. Mater., 2011, vol. 13, pp. 658–63.10.1002/adem.201000297 ↗
14. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D. Hausermann: High Press. Res., 1996, vol. 14, pp. 235–48.10.1080/08957959608201408 ↗
15. L. Lutterotti, S. Matthies, and H.-R. Wenk: in Proceeding of the twelfth international conference on textures of materials (ICOTOM-12), vol. 1, NRC Research Press Ottowa, Canada, 1999, p. 1599.
16. L.P. Freund, O.M.D.M. Messé, J.S. Barnard, M. Göken, S. Neumeier, and C.M.F. Rae: Acta Mater., 2017, vol. 123, pp. 295–304.10.1016/j.actamat.2016.10.048 ↗
17. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1588–603.10.1007/s11661-009-9858-5 ↗
18. F. Pyczak, A. Bauer, M. Göken, S. Neumeier, U. Lorenz, M. Oehring, N. Schell, A. Schreyer, A. Stark, and F. Symanzik: Mater. Sci. Eng. A, 2013, vol. 571, pp. 13–8.10.1016/j.msea.2013.02.007 ↗
19. T.M. Smith, R.R. Unocic, H. Deutchman, and M.J. Mills: Mater. High Temp., 2016, vol. 33, pp. 372–83.10.1080/09603409.2016.1180858 ↗
20. G.B. Viswanathan, S. Karthikeyan, P.M. Sarosi, R.R. Unocic, and M.J. Mills: Philos. Mag., 2006, vol. 86, pp. 4823–40.10.1080/14786430600767750 ↗
21. L. Kovarik, R.R. Unocic, J. Li, and M.J. Mills: JOM, 2009, vol. 61, pp. 42–48.10.1007/s11837-009-0026-6 ↗
22. S. Neumeier, H.U. Rehman, J. Neuner, C.H. Zenk, S. Michel, S. Schuwalow, J. Rogal, R. Drautz, and M. Göken: Acta Mater., 2016, vol. 106, pp. 304–12.10.1016/j.actamat.2016.01.028 ↗
23. L. Klein, Y. Shen, M.S. Killian, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2713–20.10.1016/j.corsci.2011.04.020 ↗
24. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Corros. Sci., 2014, vol. 83, pp. 382–95.10.1016/j.corsci.2014.03.002 ↗
25. T.M. Pollock, J. Dibbern, M. Tsunekane, J. Zhu, and A. Suzuki: JOM, 2010, vol. 62, pp. 58–63.10.1007/s11837-010-0013-y ↗