journal article·2017-05

Microstructure Evolution and Mechanical Behavior of a Hot-Rolled High-Manganese Dual-Phase Transformation-Induced Plasticity/Twinning-Induced Plasticity Steel

Liming Fu, Mokun Shan, Daoda Zhang, Huanrong Wang, Wei Wang, Aidang Shan

Publisher page

Abstract

The microstructures and deformation behavior were studied in a high-temperature annealed high-manganese dual-phase (28 vol pct δ-ferrite and 72 vol pct γ-austenite) transformation-induced plasticity/twinning-induced plasticity (TRIP/TWIP) steel. The results showed that the steel exhibits a special Luders-like yielding phenomenon at room temperature (RT) and 348 K (75 °C), while it shows continuous yielding at 423 K, 573 K and 673 K (150 °C, 300 °C and 400 °C) deformation. A significant TRIP effect takes place during Luders-like deformation at RT and 348 K (75 °C) temperatures. Semiquantitative analysis of the TRIP effect on the Luders-like yield phenomenon proves that a softening effect of the strain energy consumption of strain-induced transformation is mainly responsible for this Luders-like phenomenon. The TWIP mechanism dominates the 423 K (150 °C) deformation process, while the dislocation glide controls the plasticity at 573 K (300 °C) deformation. The delta-ferrite, as a hard phase in annealed dual-phase steel, greatly affects the mechanical stability of austenite due to the heterogeneous strain distribution between the two phases during deformation. A delta-ferrite-aided TRIP effect, i.e., martensite transformation induced by localized strain concentration of the hard delta-ferrite, is proposed to explain this kind of Luders-like phenomenon. Moreover, the tensile curve at RT exhibits an upward curved behavior in the middle deformation stage, which is principally attributed to the deformation twinning of austenite retained after Luders-like deformation. The combination of the TRIP effect during Luders-like deformation and the subsequent TWIP effect greatly enhances the ductility in this annealed high-manganese dual-phase TRIP/TWIP steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
2. A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vol. 483, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
3. D. Li, Y. Feng, S. Song, Q. Liu, Q. Bai, F. Ren, and F. Shangguan: J. Alloys Compd., 2015, vol. 618, pp. 768–75.10.1016/j.jallcom.2014.08.239 ↗
4. S. Martin, S. Wolf, U. Martin, L. Krüger, and D. Rafaja: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 49–58.10.1007/s11661-014-2684-4 ↗
5. Y.F. Shen, N. Jia, R.D.K. Misra, and L. Zuo: Acta Mater., 2016, vol. 103, pp. 229–42.10.1016/j.actamat.2015.09.061 ↗
6. S.S. Sohn, H. Song, J.G. Kim, J.H. Kwak, H.S. Kim, and S. Lee: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 706–17.10.1007/s11661-015-3187-7 ↗
7. H. Ding, H. Ding, D. Song, Z.Y. Tang, and P. Yang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 868–73.10.1016/j.msea.2010.10.040 ↗
8. B.X. Huang, X.D. Wang, Y.H. Rong, L. Wang, and L. Jin: Mater. Sci. Eng. A, 2006, vol. 438, pp. 306–11.10.1016/j.msea.2006.02.150 ↗
9. L.M. Fu, Z.M. Li, H.R. Wang, W. Wang, and A.D. Shan: Scr. Mater., 2012, vol. 67, pp. 297–300.10.1016/j.scriptamat.2012.05.010 ↗
10. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. A, 1949, vol. 62(1), pp. 49–62.10.1088/0370-1298/62/1/308 ↗
11. S.-J. Kim, C. Gil Lee, T.-H. Lee, and C.-S. Oh: Scr. Mater., 2003, vol. 48, pp. 539–44.10.1016/S1359-6462(02)00477-3 ↗
12. N. Tsuchida, Y. Tomota, K. Nagai, and K. Fukaura: Scr. Mater., 2006, vol. 54, pp. 57–60.10.1016/j.scriptamat.2005.09.011 ↗
13. G.G. Doncel, P. Adeva, M.C. Cristina, and J. Ibáñez: Acta Metall. Mater., 1995, vol. 43, pp. 4281–87.10.1016/0956-7151(95)00140-Q ↗
14. G. Tan, Y.N. Liu, P. Sittner, and M. Saunders: Scr. Mater., 2004, vol. 50, pp. 193–98.10.1016/j.scriptamat.2003.09.018 ↗
15. P. Sittner, Y.N. Liu, and V. Novák: J. Mech. Phys. Solids, 2005, vol. 53, pp. 1719–46.10.1016/j.jmps.2005.03.005 ↗
16. Y.N. Liu, Y. Liu, and J.V. Humbeeck: Scr. Mater., 1998, vol. 39, pp. 1047–55.10.1016/S1359-6462(98)00241-3 ↗
17. M.R. Barnett, M.D. Nave, and A. Ghaderi: Acta Mater., 2012, vol. 60, pp. 1433–43.10.1016/j.actamat.2011.11.022 ↗
18. E. Emadoddin, A. Akbarzadeh, and G.H. Daneshi: Mater. Sci. Eng. A, 2007, vol. 447, pp. 174–79.10.1016/j.msea.2006.10.046 ↗
19. E. Emadoddin, A. Akbarzadeh, and G.H. Daneshi: Mater. Charact., 2006, vol. 57, pp. 408–13.10.1016/j.matchar.2006.04.006 ↗
20. D.W. Suh, S.J. Park, T.H. Lee, C.S. Oh, and S.J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397–408.10.1007/s11661-009-0124-7 ↗
21. T.S. Byun, N. Hashimoto, and K. Farrell: Acta Mater., 2004, vol. 52, pp. 3889–99.10.1016/j.actamat.2004.05.003 ↗
22. W.F. Zhang, Y.M. Chen, and J.H. Zhu: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3117–20.10.1007/s11661-002-0296-x ↗
23. W.S. Park, S.W. Yoo, M.H. Kim, and J.M. Lee: Mater. Des., 2010, vol. 31, pp. 3630–40.10.1016/j.matdes.2010.02.041 ↗
24. A.S. Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3076–90.10.1007/s11661-009-0050-8 ↗
25. Y.N. Dastur and W.C. Leslie: Metall. Trans. A, 1981, vol. 12A, pp. 749–59.10.1007/BF02648339 ↗
26. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
27. B.X. Huang, X.D. Wang, L. Wang, and Y.H. Rong: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 717–24.10.1007/s11661-007-9434-9 ↗
28. H. Idrissi, L. Ryelandt, M. Veron, D. Schryvers, and P.J. Jacques: Scr. Mater., 2009, vol. 60, pp. 941–44.10.1016/j.scriptamat.2009.01.040 ↗
29. X. Tian and Y.S. Zhang: Mater. Sci. Eng. A, 2009, vol. 516, pp. 73–77.10.1016/j.msea.2009.02.031 ↗
30. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
31. M.N. Shiekhelsouk, V. Favier, K. Inal, S. Allain, O. Bouaziz, and M. Cherkaoui: Mater. Sci. Forum, 2006, vols. 524–525, pp. 833–38.10.4028/www.scientific.net/MSF.524-525.833 ↗
32. V. Torabinejad, A.Z. Hanzaki, S. Moemeni, and A. Imandoust: Mater. Des., 2011, vol. 32, pp. 5015–21.10.1016/j.matdes.2011.06.004 ↗
33. A.E. Vidoz and L.M. Brown: Philos. Mag., 1962, vol. 7, pp. 1167–75.10.1080/14786436208209116 ↗
34. B. Bhattacharya, A.S. Sharma, S.S. Hazra, and R.K. Ray: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1190–1202.10.1007/s11661-009-9797-1 ↗
35. G.B. Olson and M. Azrin: Metall. Trans. A, 1978, vol. 9A, pp. 713–21.10.1007/BF02659928 ↗
36. T. Gladman, I.D. McIvor, and F.B. Pickering: J. Iron Steel Inst., 1972, vol. 210, pp. 916–30.
37. O. Bouaziz, S. Allain, and C. Scott: Scr. Mater., 2008, vol. 58, pp. 484–87.10.1016/j.scriptamat.2007.10.050 ↗
38. O. Bouaziz, H. Zurob, B. Chehab, J.D. Embury, S. Allain, and M. Huang: Mater. Sci. Technol., 2011, vol. 27, pp. 707–09.10.1179/026708309X12535382371852 ↗
39. T.Y. Hsu: Mater. Sci. Eng. A, 2006, vol. 438, pp. 64–68.
40. A. Perlade, O. Bouaziz, and Q. Furnemont: Mater. Sci. Eng. A, 2003, vol. 356, pp. 145–52.10.1016/S0921-5093(03)00121-7 ↗
41. J. Wang and S. Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
42. J.H. Ryu, D.I. Kim, H.S. Kim, H. Bhadeshia, and D.W. Suh: Scr. Mater., 2010, vol. 63, pp. 297–99.10.1016/j.scriptamat.2010.04.020 ↗
43. T. Inoue and Z.G. Wang: Mater. Sci. Technol., 1985, vol. 1, pp. 845–50.10.1179/mst.1985.1.10.845 ↗
44. T. Inoue: Mater. Sci. Forum, 2009, vol. 614, pp. 11–20.10.4028/www.scientific.net/MSF.614.11 ↗
45. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
46. G.B. Olson and M. Cohen: Metall. Trans., 1975, vol. 6, pp. 791–95.10.1007/BF02672301 ↗
47. H. Fujita and S. Ueda: Acta Metall., 1972, vol. 20, pp. 759–67.10.1016/0001-6160(72)90104-6 ↗
48. J.W. Brooks, M.H. Loretto, and RE Smallman: Acta Metall., 1979, vol. 27, pp. 1829–38.10.1016/0001-6160(79)90073-7 ↗
49. J.W. Brooks, M.H. Loretto, and R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1839–47.10.1016/0001-6160(79)90074-9 ↗
50. S. Kajiwara: Mater. Sci. Eng. A, 1999, vol. 273, pp. 67–88.10.1016/S0921-5093(99)00290-7 ↗
51. P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1725–37.10.1007/BF02817271 ↗
52. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
53. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319, pp. 246–49.10.1016/S0921-5093(00)02019-0 ↗
54. S. Chatterjee, H.S. Wang, J.R. Yang, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 641–44.10.1179/174328406X86128 ↗
55. J.P. Hirth: Metall. Trans., 1970, vol. 1, pp. 2367–74.10.1007/BF02642816 ↗
56. Y.K. Lee and C. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–60.10.1007/s11661-000-0271-3 ↗
57. P.Y. Volosevich, V.P. Gridnew, and Y.N. Petrov: Fiz. Met. Metalloved., 1976, vol. 42, pp. 372–76.
58. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107.10.1016/0025-5416(77)90093-3 ↗
59. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77.10.2355/isijinternational.29.868 ↗