journal article·2017-04Open access

Improving the Mechanical Properties of the Fusion Zone in Electron-Beam Welded Ti-5Al-5Mo-5V-3Cr Alloys

Christopher J. Marvel, Joseph C. Sabol, Timotius Pasang, Masashi Watanabe, Wojciech Z. Misiolek

Abstract

It is well-known that ω-phase precipitates embrittle Ti-5553 alloys and that ω-phase embrittlement can be overcome with appropriate heat treatments. However, the microstructural evolution of electron-beam welded Ti-5553 is not as understood as compared to the cast or wrought material. This study compared the microstructures of as-welded and post-weld heat-treated specimens by scanning and transmission electron microscopy, and similarly compared the localized mechanical behavior of the fusion zones with microhardness testing and digital image correlation coupled tensile testing. The primary observations were that the embrittling ω-phase precipitates formed upon cooling, and could not be fully solutionized in a single-step treatment of 1077 K (804 °C) for 1 hour. It was also discovered that nanoscale α-phase precipitates nucleated after the single-step treatment, although they were small in number and sparsely distributed. However, a two-step heat treatment of 1077 K (804 °C) for 1 hour and 873 K (600 °C) for 4 hours completely solutionized the ω-phase and produced a dense network of 2-μm-wide α-phase plates, which significantly improved the mechanical properties. Overall, this study has shown that post-weld heat treatments improve the strength and ductility of electron-beam welded Ti-5553 alloys by controlling ω- and α-phase evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. G. Lütjering and J.C. Williams: Titanium, 2nd ed., Springer, Berlin, 2007.
2. [2] James D. Cotton, Robert D. Briggs, Rodney R. Boyer, Sesh Tamirisakandala, Patrick Russo, Nikolay Shchetnikov, and John C. Fanning: J. Mater. Res., 2015, vol. 67, pp. 1281–1303.
3. S.D. Bartus: Army Research Laboratory Technical Report ARL-TR-4996, 2009.
4. [4] J.C. Fanning: J. Mater. Eng. Perform., 2005, vol. 14, pp. 788–91.10.1361/105994905X75628 ↗
5. [5] J. C. Sabol, C. J. Marvel, M. Watanabe, T. Pasang, and W. Z. Misiolek: Scr. Mater., 2014, vol. 92, pp. 15–18.10.1016/j.scriptamat.2014.08.003 ↗
6. [6] D. W. Becker and W. A. Baeslack III: Weld. J., 1980, vol. 124, pp. 85–92.
7. S. Mueller, C. Bratt, P. Mueller, J. Cuddy, and K. Shankar: Proc. ICALEO 2008 27th Int. Congr. Appl. Lasers Electro-Optics, 2008, pp. 846–54.
8. [8] Ryan Mitchell, Andrew Short, Timotius Pasang, and Guy Littlefair: Adv. Mater. Res., 2011, vol. 275, pp. 81–84.10.4028/www.scientific.net/AMR.275.81 ↗
9. [9] J. C. Sabol, T. Pasang, W. Z. Misiolek, and J. C. Williams: J. Mater. Process. Technol., 2012, vol. 212, pp. 2380–85.10.1016/j.jmatprotec.2012.06.023 ↗
10. Shashi Shekhar, Rajdeep Sarkar, Sujoy Kumar, and Amit Bhattacharjee: Mater. Des., 2015, vol. 66, pp. 596–610.10.1016/j.matdes.2014.04.015 ↗
11. [11] N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 3830–39.10.1016/j.actamat.2009.04.031 ↗
12. [12] A Settefrati, M Dehmas, G Geandier, B Appolaire, S Audion, and J Delfosse: Solid State Phenom., 2011, vol. 172, pp. 760–65.10.4028/www.scientific.net/SSP.172-174.760 ↗
13. [13] Dongyang Qin, Yulong Li, Shuangyin Zhang, and Lian Zhou: J. Alloys Compd., 2016, vol. 663, pp. 581–93.10.1016/j.jallcom.2015.12.158 ↗
14. [14] Ali Dehghan-Manshadi and Rian J. Dippenaar: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1833–39.10.1016/j.msea.2010.09.061 ↗
15. [15] N. Clément, A. Lenain, and P. J. Jacques: Jom, 2007, vol. 59, pp. 50–53.10.1007/s11837-007-0010-y ↗
16. SujoyKumar Kar, Atasi Ghosh, Nishant Fulzele, and Amit Bhattacharjee: Mater. Charact., 2013, vol. 81, pp. 37–48.10.1016/j.matchar.2013.03.016 ↗
17. Timothy Schmidt, John Tyson, and Konstantin Galanulis: Exp. Tech., 2003, vol. 27, pp. 47–50.10.1111/j.1747-1567.2003.tb00115.x ↗
18. [18] T Schmidt, J Tyson, and K Galanulis: Exp. Tech., 2003, vol. 27, pp. 22–26.10.1111/j.1747-1567.2003.tb00118.x ↗
19. [19] C. Sauer and G. Lütjering: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 393–97.10.1016/S0921-5093(01)01018-8 ↗
20. [20] G. Lütjering, J. Albrecht, C. Sauer, and T. Krull: Mater. Sci. Eng. A, 2007, vol. 468–470, pp. 201–9.10.1016/j.msea.2006.07.168 ↗
21. [21] A. W. Bowen: Scr. Metall., 1971, vol. 5, pp. 709–15.10.1016/0036-9748(71)90258-4 ↗
22. [22] A. Gysler, G. Lütjering, and V. Gerold: Acta Metall., 1974, vol. 22, pp. 901–9.10.1016/0001-6160(74)90057-1 ↗
23. [23] N. G. Jones, R. J. Dashwood, D. Dye, and M. Jackson: Mater. Sci. Eng. A, 2008, vol. 490, pp. 369–77.10.1016/j.msea.2008.01.055 ↗
24. [24] S. Nag, R. Banerjee, R. Srinivasan, J. Y. Hwang, M. Harper, and H. L. Fraser: Acta Mater., 2009, vol. 57, pp. 2136–47.10.1016/j.actamat.2009.01.007 ↗
25. [25] S. Nag, Y. Zheng, R. E A Williams, A. Devaraj, A. Boyne, Y. Wang, P. C. Collins, G. B. Viswanathan, J. S. Tiley, B. C. Muddle, R. Banerjee, and H. L. Fraser: Acta Mater., 2012, vol. 60, pp. 6247–56.10.1016/j.actamat.2012.07.033 ↗
26. [26] T W Duerig, G T Terlinde, and J C Williams: Metall. Trans. A, 1980, vol. 11, pp. 1987–98.10.1007/BF02655118 ↗