journal article·2017-03

Effects of N/C Ratio on Solidification Behaviors of Novel Nb-Bearing Austenitic Heat-Resistant Cast Steels for Exhaust Components of Gasoline Engines

Yinhui Zhang, Mei Li, Larry A. Godlewski, Jacob W. Zindel, Qiang Feng

Publisher page

Abstract

In order to comply with more stringent environmental and fuel consumption regulations, novel Nb-bearing austenitic heat-resistant cast steels that withstand exhaust temperatures as high as 1,323 K (1,050 °C) is urgently demanded from automotive industries. In the current research, the solidification behavior of these alloys with variations of N/C ratio is investigated. Directional solidification methods were carried out to examine the microstructural development in mushy zones. Computational thermodynamic calculations under partial equilibrium conditions were performed to predict the solidification sequence of different phases. Microstructural characterization of the mushy zones indicates that N/C ratio significantly influenced the stability of γ-austenite and the precipitation temperature of NbC/Nb(C,N), thereby altering the solidification path, as well as the morphology and distribution of NbC/Nb(C,N) and γ-ferrite. The solidification sequence of different phases predicted by thermodynamic software agreed well with the experimental results, except the specific precipitation temperatures. The generated data and fundamental understanding will be helpful for the application of computational thermodynamic methods to predict the as-cast microstructure of Nb-bearing austenitic heat-resistant steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. N. Fukai, T. Imamura, K. Ito, and Y. Kuribayashi: Hitachi Rev., 2008, vol. 57, pp. 248–52.
2. P. Leduc, B. Dubar, A. Ranini, and G. Monnier: Oil Gas Sci. Technol., 2003, vol. 58, pp. 115–27.10.2516/ogst:2003008 ↗
3. K. Matsumoto, M. Tojo, Y. Jinnai, N. Hayashi, and S. Ibaraki: Mitsubishi Heavy Ind. Tech. Rev., 2008, vol. 45, pp. 1–5.
4. A.Y. Karnik, and M.H. Shelby: J. Eng. Gas Turbines Power, 2010, vol. 132, pp. 112801–07.10.1115/1.4000856 ↗
5. K. Itoh, K. Hayashi, and T. Souda: Hitachi Metals Tech. Rev., 2006, vol. 22, pp. 51–56.
6. Y. Yamamoto, M.P. Brady, Z.P. Lu, P.J. Maziasz, C.T. Liu, B.A. Pint, K.L. More, H.M. Meyer, and E.A. Payzant: Science, 2007, vol. 316, pp. 433–36.10.1126/science.1137711 ↗
7. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Int. J. Pres. Ves. Pip., 2007, vol. 84, pp. 21–28.10.1016/j.ijpvp.2006.09.014 ↗
8. N.D. Evans, P.J. Maziasz, J.P. Shingledecker, and M.J. Pollard: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3032–41.10.1007/s11661-010-0321-4 ↗
9. R. Reed: JOM, 1989, vol. 41, pp. 16–21.10.1007/BF03220991 ↗
10. Y.H. Zhang, M. Li, L.A. Godlewski, J.W. Zindel, and Q. Feng: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3289–94.10.1007/s11661-016-3544-1 ↗
11. K. Rajasekhar, C.S. Harendranath, R. Raman, and S.D. Kulkarni: Mater. Charact., 1997, vol. 38, pp. 53–65.10.1016/S1044-5803(97)80024-1 ↗
12. J. Elmer, S. Allen, and T. Eagar: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 2117–31.10.1007/BF02650298 ↗
13. X.F. Ding, D.F. Liu, Y.R. Zheng, and Q. Feng: Acta Metall. Sin., 2015, vol. 51, pp. 1121–28.
14. X.F. Ding, D.F. Liu, P.L. Guo, Y.R. Zheng, and Q. Feng: Int. J. Min. Met. Mater., 2016, vol. 23, pp. 442–48.10.1007/s12613-016-1254-8 ↗
15. B. Piekarski: Mater. Charact., 2010, vol. 61, pp. 899–906.10.1016/j.matchar.2010.06.001 ↗
16. K. Buchanan, M. Kral, and C. Bishop: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3373–85.10.1007/s11661-014-2285-2 ↗
17. K. Buchanan, and M. Kral: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1760–69.10.1007/s11661-011-1025-0 ↗
18. J.D. Miller, and T.M. Pollock: Acta Mater., 2014, vol. 78, pp. 23–36.10.1016/j.actamat.2014.05.040 ↗
19. X.F. Ding, J.P. Lin, L.Q. Zhang, H.L. Wang, G.J. Hao, and G.L. Chen: J. Alloys Compd., 2010, vol. 506, pp. 115–19.10.1016/j.jallcom.2010.06.151 ↗
20. P. Schaffnit, C. Stallybrass, J. Konrad, F. Stein, and M. Weinberg: Calphad., 2015, vol. 48, pp. 184–88.10.1016/j.calphad.2015.01.002 ↗
21. J.A. Brooks, and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16–44.10.1179/imr.1991.36.1.16 ↗
22. R.C. Sharma, V.K. Lakshmanan, and J.S. Kirkaldy: Metall. Trans. A, 1984, vol. 15A, pp. 545–53.10.1007/BF02644979 ↗
23. Y.N. Yu, P. Yang, W.J. Qiang, and L. Chen. Foundations of Materials Science. Beijing: High Education Press; 2006.
24. J.C. Ma, Y.S. Yang, W.H. Tong, Y. Fang, Y. Yu, and Z.Q. Hu: Mater. Sci. Eng. A, 2007, vol. 444, pp. 64–68.10.1016/j.msea.2006.08.039 ↗
25. F.B. Pickering. Physical Metallurgy and the Design of Steels. London: Applied Science Publishers Ltd; 1978.
26. Y.A. Chang, S. Chen, F. Zhang, X. Yan, F. Xie, R. Schmid-Fetzer, and W.A. Oates: Prog. Mater. Sci., 2004, vol. 49, pp. 313–45.10.1016/S0079-6425(03)00025-2 ↗
27. A.A. Luo: Calphad., 2015, vol. 50, pp. 6–22.10.1016/j.calphad.2015.04.002 ↗
28. Y.H. Zhang, M. Li, L.A. Godlewski, J.W. Zindel, and Q. Feng: Acta Metall. Sin., 2016, vol. 52, pp. 661–71.
29. Y.H. Zhang, M. Li, L.A. Godlewski, J.W. Zindel, and Q. Feng: Mater. Sci. Eng. A, 2017, vol. 683, pp. 195–206.10.1016/j.msea.2016.12.023 ↗