journal article·2017-01Open access

A Microscale Model for Ausferritic Transformation of Austempered Ductile Irons

Adrián D. Boccardo, Patricia M. Dardati, Diego J. Celentano, Luis A. Godoy

Abstract

This paper presents a new metallurgical model for the ausferritic transformation of ductile cast iron. The model allows predicting the evolution of phases in terms of the chemical composition, austenitization and austempering temperatures, graphite nodule count, and distribution of graphite nodule size. The ferrite evolution is predicted according to the displacive growth mechanism. A representative volume element is employed at the microscale to consider the phase distributions, the inhomogeneous austenite carbon content, and the nucleation of ferrite subunits at the graphite nodule surface and at the tips of existing ferrite subunits. The performance of the model is evaluated by comparison with experimental results. The results indicate that the increment of the ausferritic transformation rate, which is caused by increments of austempering temperature and graphite nodule count, is adequately represented by this model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. [1] W. Kapturkiewicz, A.A. Burbelko, J. Lelito, and E. Fraś: Int. J. Cast Met. Res., 2003, vol. 16 (1-3), pp. 287-292.10.1080/13640461.2003.11819597 ↗
2. [2] B.V. Kovacs: AFS Trans., 1994, vol. 83, pp. 417-420.
3. [3] S.M. Yoo, K. Moeinipour, A. Ludwig, and P.R. Sahm: Int. J. Cast Met. Res., 1999, vol. 11, pp. 483-488.10.1080/13640461.1999.11819321 ↗
4. [4] E. Fraś, M. Górny, E. Tyrała, and H. Lopez: Mater. Sci. Technol., 2012, vol. 28, pp. 1391-1396.10.1179/1743284712Y.0000000088 ↗
5. [5] A.D. Boccardo, P.M. Dardati, D.J. Celentano, L.A. Godoy, M. Górny, and E. Tyrała: Mater. Trans. B, 2015, vol. 47, pp. 566-575.10.1007/s11663-015-0511-y ↗
6. [6] R.C. Thomson, J.S. James and D.C. Putman: Mater. Sci. Technol., 2000, vol. 16, pp. 1412-1419.10.1179/026708300101507370 ↗
7. [7] D.C. Putman and R.C. Thomson: Int. J. Cast Met. Res., 2003, vol. 16 (1-3), pp. 191-196.10.1080/13640461.2003.11819581 ↗
8. [8] S. Mendez, U. de la Torre, P. Larranaga, R. Suarez, and D.M. Stefanescu: Met. Cast. Des. Purch., 2015, vol. 17 (5), pp. 39-44.
9. [9] M.A. Yescas and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2002, vol. 333, pp. 60-66.10.1016/S0921-5093(01)01840-8 ↗
10. [10] L. Meier, M. Hofmann, P. Saal, W. Volk and H. Hoffmann: Mater. Charact., 2013, vol. 85, pp. 124-133.10.1016/j.matchar.2013.09.005 ↗
11. [11] B. Bosnjak, B. Radulovic, K. Pop-Tonev, and V. Asanovic: J. Mater. Eng. Perform., 2001, vol. 10 (2), pp. 203-211.10.1361/105994901770345222 ↗
12. [12] U. Batra, S. Ray, and S.R. Prabhakar: J. Mater. Eng. Perform., 2004, vol. 13 (1), pp. 64-68.10.1361/10599490417515 ↗
13. [13] M. Górny, E. Tyrała, and H. Lopez: J. Mater. Eng. Perform., 2014, vol. 23 (10), pp. 3505-3510.10.1007/s11665-014-1167-5 ↗
14. [14] H.K.D.H. Bhadeshia: Bainite in steels, 2nd ed., IOM Communications Ltd., London, 2001, pp 129-188.
15. [15] G.I. Rees and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1992, vol. 8, pp. 985-993.10.1179/mst.1992.8.11.985 ↗
16. [16] L.C. Chang: Metall. Mater. Trans. A, 2003, vol. 34 (2), pp. 211-217.10.1007/s11661-003-0323-6 ↗
17. [17] Z. Ławrynowicz: Adv. Mater. Sci., 2016, vol. 16 (2), pp. 47-56.10.1515/adms-2016-0008 ↗
18. [18] H. Matsuda and H.K.D.H. Bhadeshia: Proc. R. Soc. Lond. A, 2004, vol. 460, pp. 1707-1722.10.1098/rspa.2003.1225 ↗
19. [19] G.I. Rees and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1992, vol. 8, pp. 994-996.10.1179/mst.1992.8.11.994 ↗
20. [20] D. Gaude-Fugarolas and P.J. Jacques: ISIJ Int., 2006, vol. 46 (5), pp. 712-717.10.2355/isijinternational.46.712 ↗
21. [21] K. Su, I. Ohnaka, I. Yamauchi, and T. Fukusako: Mater. Res. Soc. Symp. Proc., 1985, vol. 34, pp. 181-189.10.1557/PROC-34-181 ↗
22. [22] M.J. Santofimia, F.G. Caballero, C. Capdevila, C. García-Mateo, and C. García de Andrés: Mater. Trans., 2006, vol. 47 (10), pp. 2465-2472.10.2320/matertrans.47.2465 ↗
23. [23] H.K.D.H. Bhadeshia: Metal Sci., 1982, vol. 16, pp. 159-165.10.1179/030634582790427217 ↗
24. M.A. Yescas. Modelling the Microstructure and Mechanical Properties of Austempered Ductile Irons, Ph.D. Thesis, University of Cambridge, Cambridge, 2001.
25. [25] F. Christien, M.T.F. Telling, and K.S. Knight: Mater. Charact., 2013, vol. 82, pp. 50-57.10.1016/j.matchar.2013.05.002 ↗
26. [26] J. Lacaze and V. Gerval: ISIJ Int., 1998, vol. 38 (7), pp. 714-722.10.2355/isijinternational.38.714 ↗
27. [27] D.K.L. Tsang, B.J. Marsden, S.L. Fok, and G. Hall: Carbon, 2005, vol. 43, pp. 2902-2906.10.1016/j.carbon.2005.06.009 ↗
28. [28] J. Miettinen: Metall. Mater. Trans. B, 1997, vol. 28 (2), pp. 281-297.10.1007/s11663-997-0095-2 ↗
29. [29] S.C. Chapra and R.P. Canale: Numerical methods for engineers, 6th ed., McGraw-Hill, New York, 2010, pp. 708-719.
30. [30] U. Batra, S. Ray, and S. Prabhakar: J. Mater. Eng. Perform, 2007, vol. 16 (4), pp. 485-489.10.1007/s11665-007-9069-4 ↗