Electron Microscopic Study on the Suction Cast In Situ Ti-Fe-Sn Ultrafine Composites
Source abstract
Abstract
The current investigation reports detailed study on the microstructural evolution in the suction cast hypereutectic Ti71Fe29−x Sn x alloys during Sn addition with x = 0, 2, 2.5, 3, 3.85, 4.5, 6, and 10 at. pct and the solidification of these ternary alloys using SEM and TEM. These alloys have been prepared by melting high-purity elements using vacuum arc melting furnace under high-purity argon atmosphere. This was followed by suction casting these alloys in the water-cooled split Cu molds of diameters, ϕ = 1 and 3 mm, under argon atmosphere. The results indicate the formation of binary eutectic between bcc solid solution β-Ti and B2 FeTi in all alloys. β-Ti undergoes eutectoid transformation, β-Ti → α-Ti + FeTi, during subsequent solid-state cooling, leading to formation of hcp α-Ti and FeTi. For alloys x < 2, the primary FeTi forms from the liquid before the formation of eutectic with minute scale Ti3Sn phase. For alloys with 2 ≥ x ≤ 10, the liquid is found to undergo ternary quasi-peritectic reaction with primary Ti3Sn, L+Ti3Sn → β-Ti+FeTi, leading to formation of another kind of FeTi. In all the other alloy compositions (3.85 ≥ x ≤ 10), Ti3Sn and FeTi dendrites are observed in the suction cast alloys with profuse amount of Ti3Sn being formed for alloys with x ≥ 4.5. The current study conclusively proves that the liquid undergoes ternary quasi-peritectic reaction involving four phases, L + Ti3Sn → β-Ti + FeTi, which lies at the invariant point Ti69.2±0.8Fe27.4±0.7Sn3.4±0.2 (denoted by P). Below P, there is one univariant reaction, i.e., L → β-Ti + FeTi for all alloy compositions, whereas above P, liquid undergoes one of the univariant reactions, i.e., L + β-Ti → Ti3Sn (Sn = 2, 2.5, 3, and 4.5 at. pct) or L + FeTi → Ti3Sn for alloys (Sn = 6, 10 at. pct). For alloy with Sn = 3.85 at. pct, the ternary quasi-peritectic reaction is co-operated by two monovariant eutectic reactions, i.e., L → β-Ti + FeTi below P and L → FeTi + Ti3Sn above P. Detailed microstructural information allows us to construct liquidus projection of the investigated alloys. The results are critically discussed in the light of available literature data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. H. Gleiter: Acta Mater., 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
2. E. Ma: Met. Mater. Int., 2004, vol. 10, pp. 527–31.10.1007/BF03027414 ↗
3. C.C. Koch, D.G. Morris, K. Lu, and A. Inoue: MRS Bull., 1999, vol. 24, pp. 54–58.10.1557/S0883769400051551 ↗
4. A. Inoue, B. Shen, H. Koshiba, H. Kato, and A.R. Yavari: Nat. Mater., 2003, vol. 2, pp. 661–63.10.1038/nmat982 ↗
5. L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin, and J. Eckert: Scripta Mater., 2007, vol. 57, pp. 101–04.10.1016/j.scriptamat.2007.03.031 ↗
6. J. Das, K.B. Kim, W. Xu, W. Löser, and J. Eckert: Mater. Sci. Eng. A, 2007, vols. 449–451, 737–40.10.1016/j.msea.2006.02.374 ↗
7. J. Das, K.B. Kim, F. Baier, W. Löser, A. Gebert, and J. Eckert: J. Alloys Compd., 2007, vols. 434–435, pp. 28–31.10.1016/j.jallcom.2006.08.163 ↗
8. D.V. Louzguine-Luzgin, L.V. Louzguina-Luzgina, V.I. Polkin, and A. Inoue: Scripta Mater., 2007, vol. 57, pp. 445–48.10.1016/j.scriptamat.2007.04.021 ↗
9. D.V. Louzguine, H. Kato, and A. Inoue: Philos. Mag. Lett., 2004, vol. 84, pp. 359–64.10.1080/09500830410001728336 ↗
10. L.V. Louzguina-Luzgina, D.V. Louzguine-Luzgin, and A. Inoue: Intermetallics, 2006, vol. 14, pp. 255–59.10.1016/j.intermet.2005.06.002 ↗
11. D.V. Louzguine-Luzgin, L.V. Louzguina-Luzgina, and A. Inoue: Intermetallics, 2007, vol. 15, pp. 181–86.10.1016/j.intermet.2006.05.006 ↗
12. D.V. Louzguine-Luzgin, L.V. Louzguina-Luzgina, H. Kato, and A. Inoue: Acta Mater., 2005, vol. 53, pp. 2009–17.10.1016/j.actamat.2005.01.012 ↗
13. D.V. Louzguine-Luzgin, L.V. Louzguina-Luzgina, H. Kato, and A. Inoue: J. Alloys Compd., 2007, vols. 434–435, pp. 32–35.10.1016/j.jallcom.2006.08.335 ↗
14. G. He, J. Eckert, W. Löser, and L. Schultz: Nat. Mater., 2003, vol. 2, pp. 33–37.10.1038/nmat792 ↗
15. G. He, J. Eckert, W. Löser, and M. Hagiwara: Acta Mater., 2004, vol. 52, pp. 3035–46.10.1016/j.actamat.2004.03.006 ↗
16. B.B. Sun, M.L. Sui, Y.M. Wang, G. He, J. Eckert, and E. Ma: Acta Mater., 2006, vol. 54, pp. 1349–57.10.1016/j.actamat.2005.11.011 ↗
17. G. He, W. Löser, and J. Eckert: Acta Mater., 2003, vol. 51, pp. 5223–34.10.1016/S1359-6454(03)00386-0 ↗
18. B. Mondal, S. Samal, K. Biswas, and Govind: IOP Conference Series: Mater. Sci. Eng., 2011, vol. 27, pp. 012025–31.10.1088/1757-899X/27/1/012025 ↗
19. J. Das, K.B. Kim, and F. Baier: Appl. Phys. Lett., 2005, vol. 87, 161907–09.10.1063/1.2105998 ↗
20. J.H. Han, K.B. Kim, S. Yi, J.M. Park, S.W. Sohn, T.E. Kim, D.H. Kim, J. Das, and J. Eckert: Appl. Phys. Lett., 2008, vol. 93, pp. 141901–03.10.1063/1.2990662 ↗
21. J. Das and J. Eckert: Appl. Phys. Lett., 2006, vol. 89, pp. 261917–919.10.1063/1.2424274 ↗
22. R. Sueptitz, J. Das, S. Baunack, A. Gebert, L. Schultz, and J. Eckert: J. Alloys Compd., 2010, vol. 503, pp. 19–24.10.1016/j.jallcom.2010.05.052 ↗
23. N. Van Steenberge, J. Das, A. Concustell, J. Sort, S. Suriñach, J. Eckert, and M.D. Baró: Scripta Mater., 2006, vol. 55, pp. 1087–90.10.1016/j.scriptamat.2006.08.036 ↗
24. J. Das, F. Ettingshausen, and J. Eckert: Scripta Mater., 2008, vol. 58, pp. 631–34.10.1016/j.scriptamat.2007.11.027 ↗
25. J. Eckert, J. Das, W. Xu, and R. Theissmann: Mater. Sci. Eng. A, 2008, vol. 493, pp. 71–78.10.1016/j.msea.2007.08.094 ↗
26. G.A. Song, J.H. Han, T.E. Kim, J.M. Park, D.H. Kim, S. Yi, Y. Seo, N.S. Lee, and K.B. Kim: Intermetallics, 2011, vol. 19, pp. 536–40.10.1016/j.intermet.2010.11.030 ↗
27. G.A. Song, J.H. Han, J.M. Park, S. Yi, D.H. Kim, and K.B. Kim: J. Alloys Compd., 2011, vol. 509S, pp. S353–56.10.1016/j.jallcom.2010.12.129 ↗
28. J.H. Han, K.B. Kim, S. Yi, J.M. Park, D.H. Kim, S. Pauly, and J. Eckert: Appl. Phys. Lett., 2008, vol. 93, pp. 201906–08.10.1063/1.3029745 ↗
29. J.H. Han, D.H. Park, C.W. Bang, S. Yi, W.H. Lee, and K.B. Kim: J. Alloys Compd., 2009, vol. 483, pp. 44–46.10.1016/j.jallcom.2008.07.162 ↗
30. J.H. Han, G.A. Song, E.M. Park, S.H. Lee, J.Y. Park, Y. Seo, N.S. Lee, W.H. Lee, and K.B. Kim: Met. Mater. Int., 2011, vol. 17, pp. 873–77.10.1007/s12540-011-6002-z ↗
31. E.M. Park, G.A. Song, J.H. Han, Y. Seo, J.Y. Park, and K.B. Kim: J. Alloys Compd., 2012, vol. 515, pp. 86–89.10.1016/j.jallcom.2011.11.078 ↗
32. P. Zeitz, J.E. Wittig, and G. Frommeyer: Scripta Metall., 1986, vol. 22, pp. 757–62.10.1016/0036-9748(86)90506-5 ↗
33. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM International, Metals Park, OH, 1990.
34. G. Phanikumar, K. Biswas, O. Funke, D. Holland-Moritz, D. Herlach, and K. Chattoapadhyay: Acta Mater., 2005, vol. 53, pp. 3591–3600.10.1016/j.actamat.2005.03.053 ↗
35. D. De Fontaine, N.E. Paton, and J.C. Williams: Acta Metall., 1971, vol. 19, pp. 1153–62.10.1016/0001-6160(71)90047-2 ↗
36. J. Das, A. Güth, H.-J. Klauß, C. Mickel, W. Löser, J. Eckert, S.K. Roy, and L. Schultz: Scripta Mater., 2003, vol. 49, pp. 1189–95.10.1016/j.scriptamat.2003.08.015 ↗
37. R.M. Srivastava, J. Eckert, W. Loser, B.K. Dhindaw, and L. Schultz: Mater. Trans. JIM, 2002, vol. 43, 1670–75.10.2320/matertrans.43.1670 ↗
38. A. Jezierski and A. Slebarski: J. Magn. Magn. Mater., 2001, vol. 223, pp. 33–38.10.1016/S0304-8853(00)00593-X ↗
39. A. Prince: Alloy Phase Equilibria, Elsevier Publishing Company, New York, 1966.