Microstructural Evolution of an Al-Alloyed Duplex Stainless Steel During Tensile Deformation Between 77 K and 473 K (−196 °C and 200 °C)
Source abstract
Abstract
Tensile deformation behavior of an Al-alloyed Fe-17Cr-6Mn-4Al-3Ni-0.45C (mass pct) duplex stainless steel containing approximately 20 vol pct ferrite was studied in the temperature range from 77 K to 473 K (−196 °C to 200 °C). While the elongation exhibited a maximum near room temperature, the yield strength continuously increased at lower tensile test temperatures. According to the microstructural examinations, the twinning-induced plasticity and the dislocation cell formation were the dominant deformation mechanisms in the austenite and ferrite, respectively. Reduction of the tensile ductility at T < 273 K (0 °C) was attributed to the ready material decohesion at the ferrite/austenite boundaries. Tensile testing at 473 K (200 °C) was associated with the serrated flow which was ascribed to the Portevin–Le Chatelier effect. Due to a rise in the stacking fault energy of austenite, the occurrence of mechanical twinning was impeded at higher tensile test temperatures. Furthermore, the evolution of microstructural constituents at room temperature was studied by interrupted tensile tests. The deformation in the austenite phase started with the formation of Taylor lattices followed by mechanical twinning at higher strains/stresses. In the ferrite phase, on the other hand, the formation of dislocation cells, cell refinement, and microbands formation occurred in sequence during deformation. Microhardness evolution of ferrite and austenite in the interrupted tensile test specimens implied a higher strain-hardening rate for the austenite as it clearly became the harder phase at higher tensile strain levels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Alvarez-Armas I, Degallaix-Moreuil S: Duplex Stainless Steels, Wiley, New York, 2013.10.1002/9781118557990 ↗
2. Choi JY, Ji JH, Hwang SW, and Park K-T: Mater. Sci. Eng. A, 2012, vol. 535, pp. 32–39.10.1016/j.msea.2011.12.037 ↗
3. Seo C-H, Kwon KH, Choi K, Kim K-H, Kwak JH, Lee S, and Kim NJ: Scr. Mater., 2012, vol. 66, pp. 519–22.10.1016/j.scriptamat.2011.12.026 ↗
4. C. Herrera, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 4653–64.10.1016/j.actamat.2011.04.011 ↗
5. Chang Wang, Wenquan Cao, Jie Shi, Chongxiang Huang, and Han Dong: Mater. Sci. Eng. A, 2013, vol. 562, pp. 89–95.10.1016/j.msea.2012.11.044 ↗
6. Choi JY, Hwang SW, and Park K-T: Metall. Mater. Trans. A, 2013, vol. 44, pp. 597–601.10.1007/s11661-012-1579-5 ↗
7. Hwang SW, Ji JH, Lee EG, and Park K-T: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5196–5203.10.1016/j.msea.2011.03.045 ↗
8. Wu ZQ, Ding H, Li HY, Huang ML, and Cao FR: Mater. Sci. Eng. A, 2013, vol. 584, pp. 150–55.10.1016/j.msea.2013.07.023 ↗
9. Bénédicte Verhaeghe, François Louchet, Béatrice Doisneau-Cottignies, Yves Bréchet, and Jean-Paul Massoud: Philos. Mag. A, 1997, vol. 76, pp. 1079–91.10.1080/01418619708200016 ↗
10. En-Yu Guo, Hu-Xiao Xie, Sudhanshu S. Singh, Antony Kirubanandham, Tao Jing, and Nikhilesh Chawla: Mater. Sci. Eng. A, 2014, vol. 598, pp. 98–105.10.1016/j.msea.2014.01.002 ↗
11. Y Tomota, K Kuroki, T Mori, and I Tamura: Mater. Sci. Eng., 1976, vol. 24, pp. 85–94.10.1016/0025-5416(76)90097-5 ↗
12. Yasuhiro Maehara: Scr. Metall. Mater., 1992, vol. 26, pp. 1701–6.10.1016/0956-716X(92)90537-O ↗
13. T. Siegmund, E. Werner, and F. D. Fischer: J. Mech. Phys. Solids, 1995, vol. 43, pp. 495–532.10.1016/0022-5096(95)00003-2 ↗
14. Tahar Sahraoui, Mohamed Hadji, and Mostepha Yahi: Mater. Sci. Eng. A, 2009, vol. 523, pp. 271–76.10.1016/j.msea.2009.06.022 ↗
15. Gadelrab KR, Li G, Chiesa M, and Souier T: J. Mater. Res., 2012, vol. 27, pp. 1573–79.10.1557/jmr.2012.99 ↗
16. Roman Kolmorgen and Horst Biermann: Int. J. Fatigue, 2012, vol. 37, pp. 86–91.10.1016/j.ijfatigue.2011.10.005 ↗
17. N. Jia, R. Lin, D. W. Brown, B. Clausen, and Y. D. Wang: Metall. Mater. Trans. A, 2008, vol. 39, pp. 3134–40.10.1007/s11661-008-9675-2 ↗
18. N. Jia, R. Lin, Y. D. Wang, S. Johansson, and P. K. Liaw: Acta Mater., 2008, vol. 56, pp. 782–93.10.1016/j.actamat.2007.10.040 ↗
19. W. Zieliński, W. Świątnicki, M. Barstch, and U. Messerschmidt: Mater. Chem. Phys., 2003, vol. 81, pp. 476–79.10.1016/S0254-0584(03)00059-2 ↗
20. S. Fréchard, F. Martin, C. Clément, and J. Cousty: Mater. Sci. Eng. A, 2006, vol. 418, pp. 312–19.10.1016/j.msea.2005.11.047 ↗
21. Yuji Sutou, Naohide Kamiya, Reiko Umino, Ikuo Ohnuma, and Kiyohito Ishida: ISIJ Int., 2010, vol. 50, pp. 893–99.10.2355/isijinternational.50.893 ↗
22. Ha MC, Koo J-M, Lee J-K, Hwang SW, and Park K-T: Mater. Sci. Eng. A, 2013, vol. 586, pp. 276–83.10.1016/j.msea.2013.07.094 ↗
23. Lee K, Park S-J, Choi YS, Kim S-J, Lee T-H, Oh KH, and Han HN: Scr. Mater., 2013, vol. 69, pp. 618–21.10.1016/j.scriptamat.2013.07.015 ↗
24. S.-J. Park, B. Hwang, K.H. Lee, T.-H. Lee, D.-W. Suh, and H.N. Han: Scr. Mater., 2013, vol. 68, pp. 365–69.10.1016/j.scriptamat.2012.09.030 ↗
25. Sohn SS, Choi K, Kwak J-H, Kim NJ, and Lee S: Acta Mater., 2014, vol. 78, pp. 181–89.10.1016/j.actamat.2014.06.059 ↗
26. Sang-Heon Kim, Hansoo Kim, and Nack J. Kim: Nature, 2015, vol. 518, pp. 77–79.10.1038/nature14144 ↗
27. Hansoo Kim, Dong-Woo Suh, and Nack J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, p. 014205.10.1088/1468-6996/14/1/014205 ↗
28. R. Rahimi, B. C. De Cooman, H. Biermann, and J. Mola: Mater. Sci. Eng. A, 2014, vol. 618, pp. 46–55.10.1016/j.msea.2014.09.001 ↗
29. T. H Chen and J. R Yang: Mater. Sci. Eng. A, 2001, vol. 311, pp. 28–41.10.1016/S0921-5093(01)00911-X ↗
30. Michael Pohl, Oliver Storz, and Thomas Glogowski: Mater. Charact., 2007, vol. 58, pp. 65–71.10.1016/j.matchar.2006.03.015 ↗
31. Henrik Sieurin and Rolf Sandström: Mater. Sci. Eng. A, 2007, vol. 444, pp. 271–76.10.1016/j.msea.2006.08.107 ↗
32. R. Rahimi, G. Luan, H. Biermann, and J. Mola: in Eur. Stainl. Steel Duplex Stainl. Steel Conf., Graz, Austria, 2015, pp. 476–85.
33. Marco Breda, Katya Brunelli, Francesco Grazzi, Antonella Scherillo, and Irene Calliari: Metall. Mater. Trans. A, 2014, vol. 46, pp. 577–86.
34. G. R. Lehnhoff, K. O. Findley, and B. C. De Cooman: Scr. Mater., 2014, vol. 92, pp. 19–22.10.1016/j.scriptamat.2014.07.019 ↗
35. Reza Rahimi, Christiane Ullrich, Volker Klemm, David Rafaja, Bruno C. De Cooman, Horst Biermann, and Javad Mola: Mater. Sci. Eng. A, 2016, vol. 649, pp. 301–12.10.1016/j.msea.2015.10.005 ↗
36. S. S. Babu, E. D. Specht, S. A. David, E. Karapetrova, P. Zschack, M. Peet, and H. K. D. H. Bhadeshia: Metall. Mater. Trans. A, 2005, vol. 36, pp. 3281–89.10.1007/s11661-005-0002-x ↗
37. Robert N. Gunn: Duplex Stainless Steels: Microstructure, Properties and Applications, Woodhead Publishing, 1997.10.1533/9781845698775 ↗
38. Noriyuki Tsuchida, Taiji Kawahata, Eiichiro Ishimaru, and Akihiko Takahashi: ISIJ Int., 2014, vol. 54, pp. 1971–77.10.2355/isijinternational.54.1971 ↗
39. Dieter GE: Mechanical Metallurgy, McGraw-Hill, New York, 1988.
40. W. A. Logsdon and J. A. Begley: Eng. Fract. Mech., 1977, vol. 9, pp. 461–70.10.1016/0013-7944(77)90038-8 ↗
41. A.S. Hamada, L.P. Karjalainen, and M.C. Somani: Mater. Sci. Eng. A, 2007, vol. 467, pp. 114–24.10.1016/j.msea.2007.02.074 ↗
42. S. Martin, S. Wolf, U. Martin, L. Krüger, and D. Rafaja: Metall. Mater. Trans. A, 2016, vol. 47, pp. 49–58.10.1007/s11661-014-2684-4 ↗
43. Javad Mola, Marco Wendler, Andreas Weiß, Benedikt Reichel, Gotthard Wolf, and Bruno C. De Cooman: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1450–54.10.1007/s11661-015-2782-y ↗
44. Larry Kaufman and Morris Cohen: Prog. Met. Phys., 1958, vol. 7, pp. 165–246.10.1016/0502-8205(58)90005-4 ↗
45. K. Mills and R.J. Davis: ASM Handbook, Vol. 12, Fractography, ASM International, Materials Park, 1987.
46. L. H. de Almeida, I. Le May, and P. R. O. Emygdio: Mater. Charact., 1998, vol. 41, pp. 137–50.10.1016/S1044-5803(98)00031-X ↗
47. K. S. B Rose and S. G Gloverj: Acta Metall., 1966, vol. 14, pp. 1505–16.10.1016/0001-6160(66)90172-6 ↗
48. Lei Chen, Han-Soo Kim, Sung-Kyu Kim, and B. C. De Cooman: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
49. Giorgio Scavino, Carolina Di Salvo, Paolo Matteis, Raffaella Sesana, and Donato Firrao: Metall. Mater. Trans. A, 2012, vol. 44, pp. 787–92.
50. A. Müller, C. Segel, M. Linderov, A. Vinogradov, A. Weidner, and H. Biermann: Metall. Mater. Trans. A, 2016, vol. 47, pp. 59–74.10.1007/s11661-015-2953-x ↗
51. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗
52. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Chapman & Hall, London, 1992.10.1007/978-1-4899-3051-4 ↗
53. Y. N. Dastur and W. C. Leslie: Metall. Trans. A, 1981, vol. 12, pp. 749–59.10.1007/BF02648339 ↗
54. W. S. Owen and M. Grujicic: Acta Mater., 1998, vol. 47, pp. 111–26.10.1016/S1359-6454(98)00347-4 ↗
55. Hong S, Shin SY, Lee J, Ahn D-H, Kim HS, Kim S-K, Chin K-G, and Lee S: Metall. Mater. Trans. A, 2013, vol. 45, pp. 633–46.
56. Seok-Jae Lee, Jinkyung Kim, Shashank N. Kane, and De Cooman BC: Acta Mater., 2011, vol. 59, pp. 6809–19.10.1016/j.actamat.2011.07.040 ↗
57. Motomichi Koyama, Takahiro Sawaguchi, Taekyung Lee, Chong Soo Lee, and Kaneaki Tsuzaki: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7310–16.10.1016/j.msea.2011.06.011 ↗
58. L. Rémy, A. Pineau, and B. Thomas: Mater. Sci. Eng., 1978, vol. 36, pp. 47–63.10.1016/0025-5416(78)90194-5 ↗
59. R. M. Latanision and A. W. Ruff: Metall. Trans., 1971, vol. 2, pp. 505–9.10.1007/BF02663341 ↗
60. V.G. Gavriljuk, A.L. Sozinov, J. Foct, J.N. Petrov, and Y.A. Polushkin: Acta Mater., 1998, vol. 46, pp. 1157–63.10.1016/S1359-6454(97)00322-4 ↗
61. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 1989, vol. 113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
62. S.S Kulkarni, E.A Starke Jr, and D Kuhlmann-Wilsdorf: Acta Mater., 1998, vol. 46, pp. 5283–5301.10.1016/S1359-6454(98)00225-0 ↗
63. H.-J. Kestenbach: Philos. Mag., 1977, vol. 36, pp. 1509–15.10.1080/14786437708238531 ↗
64. I Karaman, H Sehitoglu, K Gall, Y. I Chumlyakov, and H. J Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
65. Choi WS, De Cooman BC, Sandlöbes S, and Raabe D: Acta Mater., 2015, vol. 98, pp. 391–404.10.1016/j.actamat.2015.06.065 ↗
66. A. Seeger, J. Diehl, S. Mader, and H. Rebstock: Philos. Mag., 1957, vol. 2, pp. 323–50.10.1080/14786435708243823 ↗
67. Peter Haasen: Philos. Mag., 1958, vol. 3, pp. 384–418.10.1080/14786435808236826 ↗
68. Xiong Z, Ren X, Shu J, Wang Z, Bao W, and Li S: J. Iron Steel Res. Int., 2015, vol. 22, pp. 179–84.10.1016/S1006-706X(15)60027-9 ↗
69. J.F. Breedis: Acta Metall., 1965, vol. 13, pp. 239–50.10.1016/0001-6160(65)90201-4 ↗
70. Francois Abrassart: Metall. Trans., 1973, vol. 4, pp. 2205–16.10.1007/BF02643289 ↗
71. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83.10.1016/0001-6160(89)90143-0 ↗
72. D.A. Hughes: Acta Metall. Mater., 1993, vol. 41, pp. 1421–30.10.1016/0956-7151(93)90251-M ↗
73. F.C. Chen, C.P. Chou, P. Li, and S.L. Chu: Mater. Sci. Eng. A, 1993, vol. 160, pp. 261–70.10.1016/0921-5093(93)90455-N ↗
74. Jinkyung Kim, Seok-Jae Lee, and Bruno C. De Cooman: Scr. Mater., 2011, vol. 65, pp. 363–66.10.1016/j.scriptamat.2011.05.014 ↗
75. Dai Qi-Xun, Wang An-Dong, Cheng Xiao-Nong, and Luo Xin-Min: Chin. Phys., 2002, vol. 11, p. 596.10.1088/1009-1963/11/6/315 ↗
76. W. S. Yang and C. M. Wan: J. Mater. Sci., 1990, vol. 25, pp. 1821–23.10.1007/BF01045392 ↗
77. J.B. Cohen and J. Weertman: Acta Metall., 1963, vol. 11, pp. 996–98.10.1016/0001-6160(63)90074-9 ↗
78. Doris Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 2001, vol. 315, pp. 211–16.10.1016/S0921-5093(01)01204-7 ↗
79. P. J. Jackson and D. Kuhlmann-Wilsdorf: Scr. Metall., 1982, vol. 16, pp. 105–7.10.1016/0036-9748(82)90412-4 ↗
80. Kuhlmann-Wilsdorf D and Merwe JH: Mater. Sci. Eng., 1982, vol. 55, pp. 79–83.10.1016/0025-5416(82)90086-6 ↗
81. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
82. Yoo JD and Park K-T: Mater. Sci. Eng. A, 2008, vol. 496, pp. 417–24.10.1016/j.msea.2008.05.042 ↗
83. E. J. Pavlina and C. J. Van Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888–93.10.1007/s11665-008-9225-5 ↗