journal article·2016-06

A Comparative Study on SiC-B4C-Si Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods

P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, D. Chaira

Publisher page

Abstract

Silicon carbide (SiC)–boron carbide (B4C) based cermets were doped with 5, 10, and 20 wt pct Silicon (Si) and their sinterability and properties were investigated for conventional sintering at 2223 K (1950 °C) and spark plasma sintering (SPS) at 1623 K (1350 °C). An average particle size of ~3 µm was obtained after 10 hours of milling. There is an enhancement of Vickers microhardness in the 10 wt pct Si sample from 18.10 in conventional sintering to 27.80 GPa for SPS. The relative density, microhardness, and indentation fracture toughness of the composition SiC60(B4C)30Si10 fabricated by SPS are 98 pct, 27.80 GPa, and 3.8 MPa m1/2, respectively. The novelty of the present study is to tailor the wettability and ductility of the cermet by addition of Si into the SiC-B4C matrix. Better densification with improved properties is achieved for cermets consolidated by SPS at lower temperatures than conventional sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. S. Zhang: Mater. Sci. Eng. A, 1993, Vol.163, pp. 141–148.10.1016/0921-5093(93)90588-6 ↗
2. P.Q. Campbell, J.P. Celis, J.R. Roos, and O.Van Der Biest: Wear, 1994, Vol.274, pp. 47–56.10.1016/0043-1648(94)90085-X ↗
3. D. Osset, and M. Colin: J. Nuc. Mater, 1991, Vol.183 pp. 161–173.10.1016/0022-3115(91)90484-O ↗
4. A.W. Weimer (1997) Carbide, Nitride and Boride materials Synthesis and Processing, 1 st ed. London, Chapmann and Hall, pp. 10–14.10.1007/978-94-009-0071-4 ↗
5. W.C. Johnson: Am. Ceram. Soc. Bull, 2001, Vol. 80, pp. 64–66.
6. D. Jianxin, Z. Jun, F. Yihua, and D. Zeliang: Cer. Intern. 2002, Vol.28, pp.425–430.10.1016/S0272-8842(01)00113-4 ↗
7. L.S. Sigl: J. Eur. Cer. Soc, 1998, Vol.18, pp. 1521–1529.10.1016/S0955-2219(98)00071-5 ↗
8. A.K. Suri, C. Subramanian, J.K. Sonber, and T.S.R.Ch. Murthy: Int. Mater. Rev, 2010, Vol.55, pp. 4–40.10.1179/095066009X12506721665211 ↗
9. A.J. Pyzic, and R.T. Nilson: B4C-Cu Cermets and Methods for Making Same, 1992, US Patent 5,145,504.
10. J.C. LaSalvia: Advances in Ceramic Armor IX: Ceram. Eng. Sci. Proc. 2013, vol. 34(5).10.1002/9781118807576 ↗
11. S. Prochazka: Hot Pressed Silicon Carbide, 1974, US Patent 3853566.
12. K.A. Schwetz, and W. Grellner: J. Less-Common Met, 1981, Vol.82, pp. 37–47.10.1016/0022-5088(81)90195-8 ↗
13. H. Wei, Y. Zhang, and X. Deng: J. Cer. Proces. Res, 2011, Vol.12, pp. 599–601.
14. K.A. Schwetz, L.S. Sigl and L. Pfau: J. Solid State Chem, 1997, Vol. 133, pp. 68–76.10.1006/jssc.1997.7316 ↗
15. F. Thevenot: Key Eng. Mater, 1991, Vol. 56–57, pp. 56–88.
16. L. Yun-Han, L. Jiang-Tao, G. Chang-Chun, and B. Xin-De: J. Nucl. Mater, 2002, Vol. 303, pp. 188–195.10.1016/S0022-3115(02)00801-2 ↗
17. S. Ordonez, L. Carvajal, V. Martínez, C. Agurto, J. Marin, and L. Olivares: Mater. Sci. Forum, 2005, Vol. 350, pp. 498–499.
18. A.R. Zurnachyan, S.L. Kharatyan, H.L. Khachatryan, and A.Gh. Kirakosyan: Int. J. Refra. Metal. Hard Mater, 2011, Vol. 29, pp. 250–255.10.1016/j.ijrmhm.2010.11.002 ↗
19. R. Chaim: Mater. Sci. Engg. A. 2007, Vol. 443, pp. 25–32.10.1016/j.msea.2006.07.092 ↗
20. S. Diouf, and A. Molinari: Powd. Tech. 2012, Vol.221, pp. 220–227.10.1016/j.powtec.2012.01.005 ↗
21. M. Suarez, A. Fernandez, J.L. Menendez, R. Torrecillas, H.U. Kessel, J. Hennicke, R. Kirchner, and T. Kessel: Sintering Applications, In Tech 2013, pp. 319–42.
22. M. Zhang, W. Zhang, Y. Zhang, and L. Gao: Mater. Sci. Eng. A, 2012, Vol.552, pp. 410–414.10.1016/j.msea.2012.05.062 ↗
23. G. Magnani, G. Beltrami, G.L. Minoccari, and L. Pilotti: J. Eur. Cer. Soc, 2001, Vol. 21, pp. 633–638.10.1016/S0955-2219(00)00244-2 ↗
24. D.M. Hulbert, D. Jiang, D.V. Dudina, and A.K. Mukherjee: Int. J. Refra. Metal. Hard Mater, 2009, Vol. 27, pp. 367–375.10.1016/j.ijrmhm.2008.09.011 ↗
25. S. Hayun, V. Paris, M.P. Dariel, N. Frage, and E. Zaretzky: J. Eur. Cer. Soc, 2009, Vol.29, pp. 3395–3400.10.1016/j.jeurceramsoc.2009.07.007 ↗
26. F.C. Sahin, B. Apak, I. Akin, H.E. Kanbur, D.H. Genckan, A. Turan, G. Goller, and O. Yucel: Sol. Stat. Sci, 2012, Vol.14, pp. 1660–1663.10.1016/j.solidstatesciences.2012.05.037 ↗
27. F. Thevenot: J. Eur. Cer. Soc. 1990, Vol. 6, pp. 205–225.10.1016/0955-2219(90)90048-K ↗
28. K. Suzuk, and M. Sasaki: J. Eur. Cer. Soc. 2005, Vol. 25, pp. 1611–1618.10.1016/j.jeurceramsoc.2004.06.007 ↗
29. E. Gomez, J. Echeberria, I. Iturriza, and F. Castro: J. Eur. Cer. Soc. 2004, Vol. 24, pp. 2895–2903.10.1016/j.jeurceramsoc.2003.09.002 ↗
30. X. Du, Y. Wang, Z. Zhang, F. Zhang, W. Wang, and Z. Fu: J. Mater. Sci. Eng. A. 2015, Vol. 636, pp. 133–137.10.1016/j.msea.2015.03.049 ↗
31. I.S. Han, K.S. Lee, D.W. Seo, and S.K. Woo: J. Mater. Sci. Lett. 2002, Vol. 21, pp. 703–706.10.1023/A:1015780921024 ↗
32. S. Hayun, N. Frage, and M. P. Dariel: J. Solid State Chem. 2006, Vol. 179, pp. 2875–2879.10.1016/j.jssc.2006.01.031 ↗
33. Y. Feng,W.Z. Hou, H. Zhang, and L. Liu: J. Am. Ceram. Soc. 2010, Vol. 93, pp. 2956–2959.10.1111/j.1551-2916.2010.03931.x ↗
34. R. Telle, and G. Petzow: Pow. Metall. 1986, Vol. 2, pp. 1155–1156.
35. S. Hayun, D. Rittel, N. Frage, and M.P. Dariel: Mater. Sci.Engg. A. 2008, Vol. 487, pp. 405–409.10.1016/j.msea.2007.11.062 ↗
36. S. Hayun, M.P. Dariel, N. Frage, and E. Zaretsky: Act. Mater. 2010, Vol. 58, pp. 1721–1731.10.1016/j.actamat.2009.11.014 ↗
37. K. Niihara, R. Morena, and D. P. H. Hasselman: J. Mater. Sci. Lett, 1982, Vol. 1, pp.13-16.10.1007/BF00724706 ↗
38. M. Blanda, J. Balko, A. Duszova, P. Hvizdos, J. Dusza, and H. Reveron: Acta Met. Slov. Conf, 2013, Vol.3, pp. 270–275.
39. B.M. Moshtaghioun, A.L. Ortiz, D. Gomez-Garcia, and A. D. Rodriguez: J. Euro. Cer. Soc, 2013, Vol. 33, pp. 1395–1401.10.1016/j.jeurceramsoc.2013.01.018 ↗
40. S. Hayun, V. Paris, M.P. Dariel, N. Frage, and E. Zaretzky: J. Europ. Cer. Soc, 2009, Vol. 29, pp. 3395–3400.10.1016/j.jeurceramsoc.2009.07.007 ↗
41. M. Uehara, R. Shiraishi, A. Nogami, N. Enomoto, and J. Hojo: J. Europ. Cer. Soc, 2004, Vol. 24, pp. 409–412.10.1016/S0955-2219(03)00213-9 ↗
42. Z. Zhang, X. Du, J. Wang, W. Wang, Y. Wang, and Z. Fu: Powd. Tech, 2014, Vol. 254, PP. 131–136.10.1016/j.powtec.2013.12.055 ↗