Contribution of Twinning to Low Strain Deformation in a Mg Alloy
Source abstract
Abstract
Deformation twinning plays an important role in the yielding of extruded magnesium alloys, especially when loaded in compression along the extrusion axis. The magnitude of this contribution is not accurately known. The present study employs electron backscatter diffraction to reveal the influence of grain orientation on twin-volume fraction for alloy AZ31 tested in compression to strains between 0.008 and 0.015. For these strains, it is seen that approximately 45 pct of the deformation can be attributed to "tensile" twinning. The variation of twin-volume fraction over different orientation classes correlates closely with the maximum Schmid factors for both tensile twinning and basal slip. These effects are readily explained quantitatively using a mean field crystal plasticity model without recourse to stochastic effects. Encouraged by this, we introduce an analytical approximation based on the uniformity of (axial) work. © 2013 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. E.W. Kelley, W. F. Hosford, Trans. Metall. Soc. AIME 242 (1968) 5–13.
2. E.W. Kelley, W.F. Hosford, Trans. Metall. Soc. AIME 242 (1968) 654–60.
3. R.E. Reed-Hill, Role of Deformation Twinning in Determining the Mechanical Properties of Metals Ch 11, Inhomogeneity of Plastic Deformation, AMS, Metals Park, OH, 1973.
4. L. Jiang, J.J. Jonas, A.A. Luo, A.K. Sachdev, S. Godet, Materials Science and Engineering: A 445-446 (2007) 302-09.10.1016/j.msea.2006.09.069 ↗
5. A. Ghaderi, M.R. Barnett, Acta Materialia 59 (2011) 7824-7839.10.1016/j.actamat.2011.09.018 ↗
6. A. Ghaderi, F. Siska, and M.R. Barnett: Scripta Mater., 2013, vol. 69, pp. 521–24.10.1016/j.scriptamat.2013.06.016 ↗
7. B. Clausen, C.N. Tomé, D.W. Brown, S.R. Agnew, Acta Materialia 56 (2008) 2456-68.10.1016/j.actamat.2008.01.057 ↗
8. O. Muránsky, M.R. Barnett, V. Luzin, S. Vogel, Materials Science and Engineering: A 527 (2010) 1383-94.10.1016/j.msea.2009.10.018 ↗
9. O. Muránsky, D.G. Carr, P. Sittner, E.C. Oliver, International Journal of Plasticity 25 (2009) 1107-27.10.1016/j.ijplas.2008.08.002 ↗
10. H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, C.N. Tomé, International Journal of Solids and Structures 47 (2010) 2905-17.10.1016/j.ijsolstr.2010.06.016 ↗
11. Y.B. Chun, C.H.J. Davies, Materials Science and Engineering: A 528 (2011) 4941-4946.10.1016/j.msea.2011.03.046 ↗
12. I.J. Beyerlein, L. Capolungo, P.E. Marshall, R.J. McCabe, C.N. Tome, Philosophical Magazine 90 (2010) 2161-90.10.1080/14786431003630835 ↗
13. L. Capolungo, P.E. Marshall, R.J. McCabe, I.J. Beyerlein, C.N. Tome, Acta Materialia 57 (2009) 6047-56.10.1016/j.actamat.2009.08.030 ↗
14. Y. Pei, A. Godfrey, J. Jiang, Y.B. Zhang, W. Liu, Q. Liu, Materials Science and Engineering A 550 (2012) 138–45.10.1016/j.msea.2012.04.046 ↗
15. I.J. Beyerlein, R.J. McCabe, C.N. Tomé, Journal of the Mechanics and Physics of Solids 59 (2011) 988-1003.10.1016/j.jmps.2011.02.007 ↗
16. S.R. Niezgoda, I.J. Beyerlein, A.K. Kanjarla, C.N. Tomé, JOM 65 (2013) 419-430.10.1007/s11837-012-0550-7 ↗
17. R.A. Lebensohn and C.N. Tome: Acta Metall. Mater., 1993, vol. 41, pp. 2611-2410.1016/0956-7151(93)90130-K ↗
18. M.R. Barnett, M.D. Nave, A. Ghaderi, Acta Materialia 60 (2012) 1433-43.10.1016/j.actamat.2011.11.022 ↗