journal article·2009-11

Effect of Yttrium on the Fatigue Behavior of Investment-Cast and Wrought Ti-6Al-4V

Adam L. Pilchak, James C. Williams

Publisher page

Abstract

The effect of yttrium (Y)-containing particles on the microstructure and fatigue behavior of investment-cast and hot isostatically pressed (HIP) Ti-6Al-4V has been investigated. Elemental Y was added to the Ti-6Al-4V melt to obtain a concentration of 200 ppm Y, which is 4 times the amount allowed by current industrial specifications. The observed particles were between 100 nm and 1 μm in diameter, were widely dispersed, and did not agglomerate. High-cycle fatigue tests were conducted and an extensive fractography study revealed that the effect of the particles was negligible compared to the large colony size, and therefore slip length, in the cast material. The fatigue lives were consistent with those in the literature for tests conducted on specimens containing standard concentrations of Y. A section of the casting was extruded to refine the grain size in order to study the effects of the particles on a microstructure with shorter slip lengths. The results of the fractography study on these specimens were not as straightforward. A fine particle was observed at the crack-initiation site of one of the specimens of extruded material and shallow depressions on the size scale of the particles were present in other samples. However, no evidence of Y was detected by energy-dispersive spectroscopy (EDS) and the fatigue lives were on the high end of the scatter band typically encountered in wrought and annealed Ti-6Al-4V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Fatigue and fracture mechanics · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. M.J. Buczek, G.S. Hall, S.R. Seagle, and H.B. Bomberger: Final Technical Report AFML-TR-74-255, Wright Patterson Air Force Base, Dayton OH, 1974, pp. 1–130
2. S.R. Seagle, G.S. Hall, and H.B. Bomberger: in Titanium ’80: Science and Technology: Proc. 4th Int. Conf. Ti, H. Kimura and O. Izumi, eds., Metallurgical Society of AIME, Warrendale, PA, 1980, pp. 2169–75
3. S.R. Seagle: RTI (Retired), Niles, OH, private communication, Apr.–June 2007
4. J. Ault: Precision Castparts Corp., Portland, OR, private communication, 2006–2008
5. H.J. Bunge: Texture Analysis in Materials Science, Butterworth & Co., Berlin, 1982, pp. 55–118
6. D. Eylon: J. Mater. Sci., 1979, vol. 14, pp. 1914–2210.1007/BF00551032 ↗
7. D. Eylon: Trans. TMS-AIME, 1979, vol. 9, pp. 847–55
8. A.L. Pilchak, A. Bhattacharjee, A.H. Rosenberger, and J.C. Williams: Int. J. Fatigue, 2009, vol. 31, pp. 989–9410.1016/j.ijfatigue.2008.03.036 ↗
9. G. Lutjering: Mater. Sci. Eng., A, 1998, vol. 243, pp. 31–4510.1016/S0921-5093(97)00778-8 ↗
10. Precision Castparts Corp., Portland, OR, unpublished research and competition-sensitive internal company reports, 1995–199710.1016/S1359-6128(97)84400-X ↗
11. J. McCarthy: Oregon Graduate Institute, Portland, OR, unpublished research, 1996
12. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 203–04
13. I.L. Dillamore and W.T. Roberts: Metall. Rev., 1965, vol. 10, pp. 271–38010.1179/095066065790138348 ↗
14. L. Zeng and T.R. Bieler: Mater. Sci. Eng., A., 2004, vol. 392, pp. 403–1410.1016/j.msea.2004.09.072 ↗
15. J.C. Williams, R.G. Baggerly, and N.E. Paton: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 837–5010.1007/s11661-002-0153-y ↗
16. T.R. Bieler and S.L. Semiatin: Int. J. Plast., 2002, vol. 18, pp. 1165–8910.1016/S0749-6419(01)00057-2 ↗
17. D. C. Slavik, J.A. Wert, and R.P. Gangloff: J. Mater. Res., 1983, vol. 8 (10), pp. 2482–9110.1557/JMR.1993.2482 ↗
18. V. Sinha, M.J. Mills, and J.C. Williams: J. Mater. Sci., 2007, vol. 42 (19), pp. 8334–4110.1007/s10853-006-0252-z ↗
19. C.D. Beachem and R.M.N. Pelloux: Fracture Toughness Testing and Its Applications, ASTM-STP-381, ASTM, Philadelphia, PA, 1965, pp. 210–4510.1520/STP26590S ↗
20. C.C. Wojcik, K.S. Chan, and D.A. Koss: Acta Metall., 1988, vol. 36 (5), pp. 1261–7010.1016/0001-6160(88)90278-7 ↗
21. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 143 and 152–54
22. A.L. Pilchak, A. Bhattacharjee, R.E.A. Williams, and J.C. Williams: Proc. 12th Int. Conf. on Fracture, Ottawa, QC, Canada, 2009, in press
23. A. Melander and A. Gustavsson: Int. J. Fatigue, 1996, vol. 18 (6), pp. 389–9910.1016/0142-1123(96)00069-2 ↗
24. A. Melander and P. Olund: Mater. Sci. Technol., 1999, vol. 15, pp. 555–6210.1179/026708399101506094 ↗
25. T. Sakai, Y. Sato, Y. Nagano, M. Takeda, and N. Oguma: Int. J. Fatigue, 2006, vol. 28, pp. 1547–4410.1016/j.ijfatigue.2005.04.018 ↗
26. Z.G. Yang, J.M. Zhang, S.X. Li, G.Y. Li, W.J. Hui, and Y.Q. Weng: Mater. Sci. Eng., A, 2006, vol. 427, pp. 167–7410.1016/j.msea.2006.04.068 ↗
27. J.M. Zhang, S.X. Li, Z.G. Yang, G.Y. Li, W.J. Hui, and Y.Q. Weng: Int. J. Fatigue, 2007, vol. 29, pp. 765–7110.1016/j.ijfatigue.2006.06.004 ↗
28. Y. Furuya, H. Hirukawa, T. Kimura, and M. Hayaishi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1722–3010.1007/s11661-007-9225-3 ↗
29. G.T. Hahn, M.F. Kanninen, and A.R. Rosenfield: Ann. Rev. Mater. Sci., 1972, vol. 2, pp. 381–40410.1146/annurev.ms.02.080172.002121 ↗
30. P.J. Laz, K.S. Chan, R.C. McClung, and G.R. Leverant: Fatigue Fract. Eng. Mater. Struct., 2003, vol. 26, pp. 1145–5710.1046/j.1460-2695.2003.00714.x ↗
31. G. Lutjering and J.C. Williams: Titanium, Springer-Verlag, New York, NY, 2003, pp. 58–6910.1007/978-3-540-71398-2 ↗
32. S. Li and R. Ahuja: J. Appl. Phys., 2005, vol. 97, art. no. 103711, 6 pp10.1063/1.1897838 ↗
33. Y.U. Wang, Y.M. Jin, and A.G. Khachaturyan: J. Appl. Phys., 2002, vol. 92 (3), pp. 1351–6010.1063/1.1492859 ↗
34. A.L. Pilchak, N. Zhou, Y. Wang, and J.C. Williams: The Ohio State University, Columbus, OH, unpublished research, 2008
35. Materials Properties Handbook: Titanium Alloys, R. Boyer, G. Welsch, and E.W. Collings, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, p. 553
36. A.L. Pilchak: Doctoral Dissertation, The Ohio State University, Columbus, OH, 2009
37. D. Eylon: J. Mater. Sci., 1979, vol. 14, pp. 1914–2210.1007/BF00551032 ↗
38. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 401–0810.1007/s11661-006-9061-x ↗
39. A.L. Pilchak, Z.T. Li, J.J. Fisher, A.P. Reynolds, M.C. Juhas, and J.C. Williams: in Friction Stir Welding and Processing IV, R.S. Mishra, M.W. Mahoney, T.J. Lienert, and K.V. Jata, eds., TMS, Warrendale, PA, 2007, pp. 419–27
40. A.L. Pilchak, D.M. Norfleet, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1519–2410.1007/s11661-007-9236-0 ↗
41. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Proc. 11th World Ti 2007 Conf., M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama, eds., Kyoto, Japan, 2007, pp. 1723–26