journal article·2012-12

Microstructure Formation in a Gas-Atomized Drop of Al-Pb-Sn Immiscible Alloy

Lei Zhao, Jiuzhou Zhao

Publisher page

Abstract

Al-Pb-Sn alloy is rapidly solidified by using the high-pressure gas-atomization technique. A model describing the microstructure evolution in an atomized drop is developed. This model takes into account the concurrent actions of the nucleation, diffusional growth, spatial motions of the minority-phase droplets, and the solidification of the matrix liquid. The microstructure formation in the gas-atomized drop is simulated by coupling the thermodynamic and kinetic calculations. The numerical results show a favorable agreement with the experimental results. They demonstrate that under the rapid cooling conditions of gas atomization, the spatial phase separation due to the Marangoni migration of the minority-phase droplets mainly affects the microstructure formation in a small region close to the atomized drop surface. All the minority-phase droplets are nucleated during the liquid-liquid phase decomposition period. For an Al-(5-9) wt pct Pb-3 wt pct Sn alloy, the average radius and number density of the minority-phase particles depend exponentially on the powder diameter. The microstructure formation process is discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. L. Ratke and S. Diefenbach: Mater. Sci. Eng. R, 1995, vol. 15, pp. 263–347.10.1016/0927-796X(95)00180-8 ↗
2. C.P. Wang, X.J. Liu, R.P. Shi, C. Shen, Y. Wang, I. Ohnuma, R. Kainuma, and K. Ishida: Appl. Phys. Lett., 2007, vol. 91, p. 141904.10.1063/1.2794415 ↗
3. C.P. Wang, X.J. Liu, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2002, vol. 297, pp. 990–93.10.1126/science.1073050 ↗
4. J.J. Guo, C.Z. Zhao, S.P. Wu, Y.Q. Su, and J. Jia: Mater. Sci. Technol., 2004, vol. 20, pp. 653–57.10.1179/026708304225016716 ↗
5. X.Y. Lu, C.D. Cao, M. Kolbe, B. Wei, and D.M. Herlach: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 1101–04.10.1016/j.msea.2003.10.106 ↗
6. J.Z. Zhao and L. Ratke: Scripta Mater., 2004, vol. 50, pp. 543–46.10.1016/j.scriptamat.2003.10.024 ↗
7. J.Z. Zhao: Mater. Sci. Eng. A, 2007, vols. 454–455, pp. 637–40.10.1016/j.msea.2006.11.127 ↗
8. B.C. Luo, H.P. Wang, and B.B. Wei: Chin. Sci. Bull., 2009, vol. 54, pp. 183–88.10.1007/s11434-009-0018-5 ↗
9. M.H. Wu, A. Ludwig, and L. Ratke: Modell. Simul. Mater. Sci. Eng., 2003, vol. 11, pp. 755–69.10.1088/0965-0393/11/5/304 ↗
10. J.Z. Zhao, H.L. Li, and L. Zhao: Acta Metall. Sin., 2009, vol. 45, pp. 1435–40.
11. L. Granasy and L. Ratke: Scripta Mater., 1993, vol. 28, pp. 1329–34.10.1016/0956-716X(93)90477-A ↗
12. J.Z. Zhao, L. Ratke, and B. Feuerbacher: Modell. Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 123–39.10.1088/0965-0393/6/2/003 ↗
13. J.A. Marqusee and J. Ross: J. Chem. Phys., 1984, vol. 80, pp. 536–43.10.1063/1.446427 ↗
14. L.E. Goodrich: Int. J. Heat Mass Trans., 1978, vol. 21, pp. 615–21.10.1016/0017-9310(78)90058-3 ↗
15. W.E. Ranz and W.R. Marshall: Chem. Eng. Prog., 1952, vol. 48, pp. 141–46.
16. P.S. Grant, B. Cantor, and L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3097–108.10.1016/0956-7151(93)90039-U ↗
17. Q.Q. Lu, J.R. Fontaine, and G. Aubertin: Int. J. Heat Mass Trans., 1993, vol. 36, pp. 79–87.10.1016/0017-9310(93)80068-6 ↗
18. R. Clif, J.R. Grace, and M.E. Weber: Bubbles, Drops and Particles, Academic Press, New York, NY, 1978, pp. 111–13.
19. S.V. Patankar: Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, NY, 1980, pp. 1–150.
20. H.L. Lukas, S.G. Fries, and B. Sundman: Computational Thermodynamics: The Calphad Method, Cambridge University Press, Cambridge, MA, 2007, pp. 101–16.10.1017/CBO9780511804137 ↗
21. J-H Shim, H-N Lee, H.P. Ha, Y.W. Cho, and E-P Yoon: J. Alloy. Compd. 2001, vol. 327, pp. 270–74.10.1016/S0925-8388(01)01426-8 ↗
22. O. Redlich and A.T. Kister: Ind. Eng. Chem., 1948, vol. 40, pp. 345–48.10.1021/ie50458a036 ↗
23. A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317–425.10.1016/0364-5916(91)90030-N ↗
24. S-K Yu, F. Sommer, and B. Predel: Z. Metallkd., 1996, vol. 87, pp. 574–80.
25. J. Miettinen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1639–48.10.1007/s11661-002-0173-7 ↗
26. H. Ohtani, K. Okuda, and K. Ishida: J. Phase. Equilib., 1995, vol. 16, pp. 416–29.10.1007/BF02645349 ↗
27. Y.J. Liu and D. Liang: J. Alloy. Compd., 2005, vol. 403, pp. 110–17.10.1016/j.jallcom.2005.05.036 ↗
28. N. Eustathopoulos, D. Chatain, and C. Vahlas: Scripta Metall., 1984, vol. 18, pp. 1–6.10.1016/0036-9748(84)90079-6 ↗
29. F. Falk: Immiscible Liquid Metals and Organics, L. Ratke, ed., DGM Informationsgesellschaft, Oberursel, Germany, 1993, pp. 93–100.
30. M. Merkwitz and W. Hoyer: Z. Metallkd., 1999, vol. 90, pp. 363–70.
31. I. Kaban and W. Hoyer: Phys. Rev. B, 2008, vol. 77, p. 125426.10.1103/PhysRevB.77.125426 ↗
32. G. Kaptay: CALPHAD, 2008, vol. 32, pp. 338–52.10.1016/j.calphad.2007.10.002 ↗
33. C.V. Thompson and F. Spaepen: Acta Metall., 1983, vol. 31, pp. 2021–27.10.1016/0001-6160(83)90019-6 ↗
34. S.Z. Beer: Liquid Metals, Marcel Dekker Inc., New York, NY, 1972, pp. 431–60.
35. A.I. Pommrich, A. Meyer, D. Holland-Moritz, and T. Unruh: Appl. Phys. Lett., 2008, vol. 92, p. 241922.10.1063/1.2947592 ↗
36. A.K. Roy and R.P. Chhabra: Metall. Trans. A, 1988, vol. 19A, pp. 273–79.10.1007/BF02652536 ↗
37. X.P. Su, S. Yang, J.H. Wang, N-Y Tang, F.C. Yin, Z. Li, and M.X. Zhao: J. Phase Equilib. Diffus., 2010, vol. 31, pp. 333–40.10.1007/s11669-010-9726-4 ↗