journal article·2011-11

Kinetics of Delta-Ferrite to Austenite Phase Transformation in a Two-Phase Fe-Al-C Alloy

Tihe Zhou, Hatem S. Zurob, Elachmi Essadiqi, Benoit Voyzelle

Publisher page

Abstract

The kinetics of delta-ferrite to austenite phase transformation was investigated using a quenching dilatometer in a Fe-Al-C alloy. The results showed that the austenite phase nucleated along the delta grain boundaries. The transformed austenite morphology changed from cellular to Widmanstatten pattern when the holding temperature decreased from 1398 K to 1123 K (1125 °C to 850 °C). Full partitioning of the substitutional alloying elements was observed and the spacing of the austenite plates was controlled by the diffusing distance of the substitutional elements. Interestingly, growth of the austenite front was controlled by the long-range diffusion of carbon from the center of the delta grains to the growing front. Deformation of the delta phase enhanced the nucleation of austenite at existing grain boundaries and newly formed subgrain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steel, Institute of Metals, London, 1997.
2. W. Haensch and C. Klinkenberg: Ironmaking and Steelmaking, 2005, vol. 32 (4), pp. 342–46.10.1179/174328105X47990 ↗
3. R.R. Thridandapani, R.D.K. Misra, T. Mannering, D. Panda, and S. Jansto: Mater. Sci. Eng. A, 2006, vol. 422, pp. 285–91.10.1016/j.msea.2006.02.022 ↗
4. I.D.S. Bott, L.F.C.G. Teixeira, and P.R. Rios: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 443–54.10.1007/s11661-005-0315-9 ↗
5. J. Guo, C. Shang, S. Yang, H. Guo, X. Wang, and X. He: Mater. Design, 2009, vol. 30, pp. 129–34.10.1016/j.matdes.2008.04.038 ↗
6. A.J. DeArdo, M.J. Hua, K.G. Cho, and C.I. Garcia: Mater. Sci. Technol., 2009, vol. 25 (9), pp. 1074–82.10.1179/174328409X455233 ↗
7. M.C. Flemings: Solidification Processing, McGraw-Hill Inc., New York, NY, 1974.
8. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1998.
9. Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705.10.1007/s11663-003-0040-y ↗
10. J.E. Camporredondo-S, A.H. Castillejos-E, F.A. Acosta-G, E.P. Guttérrz-M, and M.A. Herrera-G: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 541–60.10.1007/s11663-004-0054-0 ↗
11. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Chapman & Hall, New York, NY, 1992.10.1007/978-1-4899-3051-4 ↗
12. R.W. Cahn and P. Haasen: Physical Metallurgy, Elsevier Science Publishing Company Inc., New York, 1983.
13. P.P. Suikkanen, J.I. Kömi, and L.P. Karjalainen: Mater. Sci. Forum, 2005, vols. 500–501, pp. 535–42.10.4028/www.scientific.net/MSF.500-501.535 ↗
14. A.A. Gorni and P.R. Mei: J. Mater. Process. Technol., 2004, vols. 155–156, pp. 1513–18.10.1016/j.jmatprotec.2004.04.245 ↗
15. W. Huang and M. Hillert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 480–83.10.1007/BF02648428 ↗
16. T. Zhou, R.J. O’Malley, and H. Zurob: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2112–20.10.1007/s11661-010-0246-y ↗
17. C.-P. Reip, W. Hennig, J. Kempken, and R. Hagmann: Mater. Sci. Forum, 2005, vols. 500–501, pp. 287–94.10.4028/www.scientific.net/MSF.500-501.287 ↗
18. P. Uranga, A.I. Fernández, B. López, and J.M. Rodriguez-Ibabe: Mater. Sci. Forum, 2005, vols. 500–501, pp. 245–52.10.4028/www.scientific.net/MSF.500-501.245 ↗
19. Available from Thermo-calc Software: www.thermocalc.com.
20. M. Kikuchi, T. Urabe, G. Cliff, and G.W. Lorimer: Acta Metall. Mater., 1990, vol. 38 (6), pp. 1115–20.10.1016/0956-7151(90)90184-I ↗
21. H. Yin, T. Emi, and H. Shibata: Acta Mater., 1999, vol. 47 (5), pp. 1523–35.10.1016/S1359-6454(99)00022-1 ↗
22. Z. Liu, Y. Kobayashi, J. Yang, K. Nagai, and M. Kuwabara: ISIJ Int., 2006, vol. 46 (6), pp. 847–53.10.2355/isijinternational.46.847 ↗
23. G.R. Purdy, D.H. Weichert, and J.S. Kirkaldy: Trans. TMS-AIME, 1964, vol. 230, pp. 1025–34.
24. P. Wycliffe, G.R. Purdy, and J.D. Embury: Fundamentals of Dual-Phase Steels, Chicago, IL, 1981, TMS-AIME, Warrendale, PA, 1981, pp. 59–83.
25. M. Kikuchi, M. Kajihara, and S.K. Choi: Mater. Sci. Eng. A, 1991, vol. 146, pp. 131–50.10.1016/0921-5093(91)90273-P ↗
26. J.W. Cahn and W.C. Hagel: Acta Metall., 1963, vol. 11, pp. 561–74.10.1016/0001-6160(63)90090-7 ↗
27. C.R. Hutchinson, R.E. Hackenberg, and G.J. Shiflet: Acta Mater., 2004, vol. 52, pp. 3565–85.10.1016/j.actamat.2004.04.010 ↗
28. F. Zarandi and S. Yue: Mater. Sci. Forum, 2005, vols. 500–501, pp. 115–22.10.4028/www.scientific.net/MSF.500-501.115 ↗