Annealing behavior of submicrocrystalline oxide-bearing iron produced by mechanical alloying
Source abstract
Abstract
The structural changes upon annealing of an ultrafine-grained iron containing dispersed oxides were studied. The starting material was subjected to mechanical milling followed by consolidating bar rolling. The fine-grained microstructures were essentially stable against discontinuous grain growth and/or primary recrystallization during annealing at temperatures up to 800 °C, where the specimens maintain a very fine ferrite grain size. The annealing behavior is mainly characterized by normal grain growth accompanied by recovery. The grain-growth kinetics correlates with the oxide coarsening. Both the grain growth and the oxide coarsening can be enhanced by an increase in the temperature. The static restoration/recrystallization processes operating in the ultrafine-grained matrices, as well as the effect of dispersed oxides particles, are discussed in some detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. H. Gleiter: Progr. Mater. Sci., 1989, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
2. O.A. Kaibyshev: Superplasticity of Alloys, Intermetalics and Ceramics, Springer, Berlin, 1992, pp. 1–36.10.1007/978-3-642-84673-1 ↗
3. C.C. Koch: Nanostr. Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
4. F.J. Humphreys, P.B. Prangnell, J.R. Bowen, A. Gholinia, and C. Harris: Phil. Trans. R. Soc. London, 1999, vol. 357, pp. 1663–81.10.1098/rsta.1999.0395 ↗
5. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
6. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
7. Y. Kimura, S. Takaki, S. Suejima, R. Uemori, and H. Tamehiro: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 176–82.10.2355/isijinternational.39.176 ↗
8. Y. Sakai, M. Ohtaguchi, Y. Kimura, and K. Tsuzaki: in Ultrafine Grained Materials, R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe, eds., TMS, Warrendale, PA, 2000, pp. 361–70.
9. A. Belyakov, Y. Sakai, T. Hara, Y. Kimura, and K. Tsuzaki: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1769–76.10.1007/s11661-001-0153-3 ↗
10. M. Ohtaguchi, K. Tsuzaki, and K. Nagai: in Recrystallization and Related Phenomena (ReX’99), T. Sakai and H.G. Suzuki, eds., The Japan Institute of Metals, Sendai, Japan, 1999, pp. 495–500.
11. D.B. Williams and C.B. Carter: Transmission Electron Microscopy, Plenum Press, New York, NY, 1996, pp. 369–71.10.1007/978-1-4757-2519-3 ↗
12. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
13. A. Belyakov, T. Sakai, H. Miura, and R. Kaibyshev: Phil. Mag. Lett., 2000, vol. 80, pp. 711–18.10.1080/09500830050192927 ↗
14. V.Y. Gertsman, R. Berringer, R.Z. Valiev, and H. Gleiter: Scripta Metall., 1994, vol. 30, pp. 229–34.10.1016/0956-716X(94)90045-0 ↗
15. M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T. Langdon: Phil. Mag. A, 1998, vol. 78, pp. 203–15.10.1080/014186198253769 ↗
16. A. Belyakov, Y. Sakai, T. Hara, Y. Kimura, and K. Tsuzaki: Scripta Mater., 2001, vol. 45, pp. 1213–19.10.1016/S1359-6462(01)01152-6 ↗
17. G. Wiener: Trans. ASM, 1952, vol. 44, pp. 1169–85.
18. P. Hellman and M. Hillert: Scand. J. Metall., 1975, vol. 4, pp. 211–19.
19. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1996, pp. 235–326.
20. K.T. Park, Y.S. Kim, J.G. Lee, and D.H. Shin: Mater. Sci. Eng. A, 2000, vol. A293, pp. 165–72.10.1016/S0921-5093(00)01220-X ↗
21. J.W. Martin: Micromechanics in Particle-Hardened Alloys, Cambridge University Press, Cambridge, 1980, pp. 41–49.
22. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
23. C.S. Smith: Trans. ASM, 1948, vol. 175, pp. 15–51.
24. T. Gladman: Proc. Roy. Soc. London, 1966, vol. 294A, pp. 298–309.
25. E. Hornbogen and U. Koster: in Recrystallization of Metallic Materials, F. Haessner, ed., Verlag, Stuttgart, 1978, pp. 159–94.
26. P.M. Hazzledine, P.B. Hirsch, and N. Louat: in Recrystallization and Grain Growth of Multi-Phase and Particle Containing Materials, N. Hansen, A.R. Jones, and T. Leffers, eds., Riso, Roskilde, 1980, pp. 159–64.
27. A.K. Koul and F.B. Pickering: Acta Metall., 1982, vol. 30, pp. 1303–08.10.1016/0001-6160(82)90149-3 ↗
28. P.A. Manohar, M. Ferry, and T. Chandra: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
29. P.A. Beck, J.C. Kremer, L.J. Demer, and M.L. Holzworth: Trans. AIME, 1948, vol. 175, pp. 372–400.
30. C.M. Sellars and J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–94.10.1016/0036-9748(79)90290-4 ↗
31. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
32. A.J. Ardell: Acta Metall., 1972, vol. 20, pp. 601–09.10.1016/0001-6160(72)90015-6 ↗
33. P.A. Beck: J. Appl. Phys., 1947, vol. 18, pp. 1028–29.10.1063/1.1697575 ↗
34. P.A. Beck: J. Appl. Phys., 1948, vol. 19, pp. 507–09.10.1063/1.1698164 ↗
35. J.E. Burke: J. Appl. Phys., 1947, vol. 18, p. 1028.10.1063/1.1697574 ↗
36. J. Takada, S. Yamamoto, and M. Adachi: Z. Metallkd., 1986, vol. 77, pp. 6–11.
37. R. Barlow and P.J. Grundy: J. Mater. Sci., 1969, vol. 4, pp. 797–801.10.1007/BF00551075 ↗
38. M.J. Gore, M. Grujicic, G.B. Olson, and M. Cohen: Acta Metall., 1989, vol. 37, pp. 2849–54.10.1016/0001-6160(89)90320-9 ↗