Relative Stability of Deformed Cube in Warm and Hot Deformed AA6022: Possible Role of Strain-Induced Boundary Migration
Source abstract
Abstract
AA6022 samples were deformed at different temperatures and strain rates and to respective true strains of 1.0 and 2.0. Though the deformation was immediately followed by quenching, the as-deformed samples contained recrystallized grains. A convention was adopted, based on grain size and in-grain misorientation developments, to distinguish between the deformed and recrystallized grains/orientations. At the highest deformation temperature(s), a clear pattern of increase (with increase in strain) in deformed cube \( \left\{ {001} \right\}\left\langle {100} \right\rangle \) was established. Such a pattern could not be explained from Taylor type deformation texture simulations, even after allowing nonoctahedral as well as octahedral slip. Microstructural observations could link, statistically, the increased cube presence with the presence of thicker deformed cube bands. The process of thickening was hypothesized as strain-induced boundary migration (SIBM) of the deformed cube bands into the adjacent noncube.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: in Thermo-Mechanical Processing of Metallic Materials, R.W. Cahn, ed., Elsevier, Amsterdam, 2007.
2. P.A. Hollinshead and T. Sheppard: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1495–1507.
3. G.B. Sarma and B. Radhakrishnan: Mater. Sci. Eng., A, 2004, vol. 385, pp. 91–104.10.1016/j.msea.2004.06.007 ↗
4. M. Crumbach, G. Gottstein, L. Löchte, D. Piot, J. Driver, C.M. Allen, and J.F. Savoie: Mater. Sci. Forum, 2002, vols. 396–402, pp. 357–64.10.4028/www.scientific.net/MSF.396-402.357 ↗
5. L. Delannay, O.V. Mishin, D. Juul-Jensen, and P. Van Houtte: Acta Mater., 2001, vol. 49, pp. 2441–51.10.1016/S1359-6454(01)00150-1 ↗
6. I. Samajdar, P. Ratchev, B. Verlinden, and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1759–69.10.1016/S1359-6454(01)00083-0 ↗
7. F. Basson and J.H. Driver: Acta Mater., 2000, vol. 48, pp. 2101–15.10.1016/S1359-6454(00)00042-2 ↗
8. A. Akef and J.H. Driver: Mater. Sci. Eng., A, 1999, vol. 132, pp. 245–55.10.1016/0921-5093(91)90381-V ↗
9. J.F. Butler and H. Hu: Mater. Sci. Eng., A, 1989, vol. 114, pp. L29–L33.10.1016/0921-5093(89)90875-7 ↗
10. D. Juul Jensen, R.K. Bolingbroke, H. Shi, R. Shahani, and T. Furu: Mater. Sci. Forum, 1999, vols. 157–162, pp. 1991–96.
11. R.A. Ricks, A. Howe, L.M. Brown, J.H. Beynon, and N. Hansen: Phil. Trans., 1999, vol. 357, pp. 1513–29.10.1098/rsta.1999.0387 ↗
12. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
13. Q. Liu, C. Maurice, J. Driver, and N. Hansen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1998–2333.
14. I. Samajdar, P. Ratchev, B. Verlinden, P. Van Houtte, and P. De Smet: Mater. Sci. Eng., A, 1998, vol. 247, pp. 58–66.10.1016/S0921-5093(97)00773-9 ↗
15. J.A. Wert, Q. Liu, and N. Hansen: Acta Mater., 1997, vol. 45, pp. 2565–76.10.1016/S1359-6454(96)00348-5 ↗
16. S. Panchanadeeswaran, R.D. Doherty, and R. Becker: Acta Mater., 1996, vol. 44, pp. 1233–62.10.1016/1359-6454(95)00186-7 ↗
17. D. Raabe: Acta Metall. Mater., 1995, vol. 43, pp. 1023–28.10.1016/0956-7151(94)00302-X ↗
18. R.K. Bolingbroke, G.J. Marshall, and R.A. Ricks: Mater. Sci. Forum, 1994, vols. 157–162, pp. 1145–52.10.4028/www.scientific.net/MSF.157-162.1145 ↗
19. C. Maurice and J.H. Driver: Acta Metall. Mater., 1993, vol. 41, pp. 1653–64.10.1016/0956-7151(93)90185-U ↗
20. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
21. H. Weiland and J. Hirsch: Text. Microstruct., 1991, vols. 14–18, pp. 647–52.10.1155/TSM.14-18.647 ↗
22. C. Maurice, D. Piot, H. Klocker, and J.H. Driver: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 1039–47.
23. A. Skalli, R. Fortunier, and J.H. Driver: Acta Metall., 1985, vol. 33, pp. 997–1007.10.1016/0001-6160(85)90194-4 ↗
24. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, pp. 1929–39.10.1016/0001-6160(82)90033-5 ↗
25. I.L. Dillamore and H. Katoh: Met. Sci., 1974, vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
26. W.B. Hutchinson, A Oscarsson, and Å Karlsson: Mater. Sci. Technol., 1989, vol. 5, pp. 1118–27.10.1179/mst.1989.5.11.1118 ↗
27. M.H. Alvi, S. Cheong, J.P. Suni, H. Weiland, and A.D. Rollett: Acta Mater., 2008, vol. 56, pp. 3098–3108.10.1016/j.actamat.2008.02.037 ↗
28. S. Raveendra, S. Mishra, K.V. Mani Krishna, H. Weiland, and I. Samajdar: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2760–71.10.1007/s11661-008-9620-4 ↗
29. M. Alvi, S. Cheong, J.P. Suni, H. Weiland, and A.D. Rollett: Mater. Sci. Forum, 2004, vols. 467–470, pp. 357–62.10.4028/www.scientific.net/MSF.467-470.357 ↗
30. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon, Oxford, United Kingdom, 2002.
31. G. Guiglionda, A. Borbely, and J.H. Driver: Acta Mater., 2004, vol. 52, pp. 3413–23.10.1016/j.actamat.2004.03.037 ↗
32. P.J. Hurley and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 3779–93.10.1016/S1359-6454(03)00192-7 ↗
33. T.J. Sabin, G. Winther, and D. Juul-Jensen: Acta Mater., 2003, vol. 51, pp. 3999–4011.10.1016/S1359-6454(03)00220-9 ↗
34. N. Stanford, D. Dunne, and M. Ferry: Mater. Sci. Eng., A, 2003, vol. 348, pp. 154–62.10.1016/S0921-5093(02)00748-7 ↗
35. R.A. Vandermeer and D. Juul-Jensen: Acta Mater., 2003, vol. 51, pp. 3005–18.10.1016/S1359-6454(03)00112-5 ↗
36. R. Sebald and G. Gottstein: Acta Mater., 2002, vol. 50, pp. 1587–98.10.1016/S1359-6454(02)00020-4 ↗
37. M.C. Theyssier and J.H. Driver: Mater. Sci. Eng., A, 1999, vol. 272, pp. 73–82.10.1016/S0921-5093(99)00469-4 ↗
38. I. Samajdar, B. Verlinden, L. Rabet, and P. Van Houtte: Mater. Sci. Eng., A, 1999, vol. 266, pp. 146–54.10.1016/S0921-5093(99)00022-2 ↗
39. I. Samajdar and R.D. Doherty: Acta Mater., 1998, vol. 46, pp. 3145–58.10.1016/S1359-6454(97)00492-8 ↗
40. D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul-Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng., A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
41. O. Daaland and E. Nes: Acta Mater., 1996, vol. 44, pp. 1389–411.10.1016/1359-6454(95)00289-8 ↗
42. O. Engler, H.E. Vatne, and E. Nes: Mater. Sci. Eng., A, 1996, vol. 205, pp. 187–98.10.1016/0921-5093(95)09879-8 ↗
43. M. Ferry and F.J. Humphreys: Acta Mater., 1996, vol. 47, pp. 1293–1308.10.1016/1359-6454(95)00316-9 ↗
44. H.E. Vatne, R. Shahani, and E. Nes: Acta Mater., 1996, vol. 44, pp. 4447–62.10.1016/1359-6454(96)00077-8 ↗
45. H.E. Vatne, T. Furu, R. Ørsund, and E. Nes: Acta Mater., 1996, vol. 44, pp. 4463–73.10.1016/1359-6454(96)00078-X ↗
46. D. Juul-Jensen: Acta Metall. Mater., 1995, vol. 43, pp. 4117–29.10.1016/0956-7151(95)00111-8 ↗
47. R.D. Doherty, K. Kashyap, and S. Panchanadeeswaran: Acta Metall. Mater., 1993, vol. 41, pp. 3029–53.10.1016/0956-7151(93)90117-B ↗
48. B.J. Duggan, K. Lücke, G. Köhlhoff, and C.S. Lee: Acta Metall. Mater., 1993, vol. 41, pp. 1921–27.10.1016/0956-7151(93)90211-A ↗
49. O. Engler and K. Lücke: Scripta Metall. Mater., 1992, vol. 27, pp. 1527–32.10.1016/0956-716X(92)90139-6 ↗
50. J. Hjelen, R. Orsund, and E. Nes: Acta Metall. Mater., 1991, vol. 39, pp. 1377–1404.10.1016/0956-7151(91)90225-P ↗
51. R. Ørsund and E. Nes: Scripta Metall., 1988, vol. 22, pp. 671–76.10.1016/S0036-9748(88)80180-7 ↗
52. F.J. Humphreys and P.N. Kalu: Acta Metall., 1987, vol. 35, pp. 2815–29.10.1016/0001-6160(87)90281-1 ↗
53. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323–44.10.1016/0001-6160(77)90109-2 ↗
54. T. Petterson: Ph.D. Thesis, Nowegian University of Science and Technology (NTNU), Trondheim, Norway, 1999.
55. C.M. Sellars and W.J.McG. Tegart: Int. Metall. Rev., 1972, vol. 17, pp. 1–24.10.1179/095066072790137765 ↗
56. H.J. Bunge: Texture Analysis in Materials Science, Butterworth and Co., London, 1982.
57. P. Van Houtte: The MTM-FHM and MTM_Taylor Software System, version 2, MTM-KULeuven, Belgium, 1995.
58. L.S. Toth and P. Van Houtte: Text. Microstruct., 1992, vol. 19, pp. 229–44.10.1155/TSM.19.229 ↗
59. P. Van Houtte: Text. Microstruct., 1988, vols. 8-9, pp. 313–50.10.1155/TSM.8-9.313 ↗
60. P. Van Houtte, L. Delannay, and I. Samajdar: Text. Microstruct., 1999, vol. 31, pp. 109–49.10.1155/TSM.31.109 ↗
61. N. Rajamohan and J.A. Szpunar: Acta Mater., 2000, vol. 48, pp. 3327–40.10.1016/S1359-6454(00)00154-3 ↗
62. D.D. Sam and B.L. Adams: Metall. Trans. A, 1986, vol. 17A, pp. 513–17.10.1007/BF02643958 ↗
63. J.S. Kallend and Y.C. Huang: Met. Sci., 1984, vol. 18, pp. 381–85.10.1179/030634584790419890 ↗
64. G.R. Stibitz: Phys. Rev., 1937, vol. 49, pp. 862–63.
65. Y. Huang and F.J. Humphreys: Acta Mater., 1999, vol. 47, pp. 2259–68.10.1016/S1359-6454(99)00062-2 ↗
66. Y. Huang and F.J. Humphreys: Acta Mater., 2000, vol. 48, pp. 2017–30.10.1016/S1359-6454(99)00418-8 ↗
67. W.B. Hutchinson: private communication, Corrosion and Metals Research Institute (KIMAB), Stockholm, Sweden.