Effect of Build Height on Temperature Evolution and Thermally Induced Residual Stresses in Plasma Arc Additively Manufactured Stainless Steel
Source abstract
Abstract
Plasma arc additive manufacturing (PAM) is receiving an increasing attention because of its efficiency of dimensional size and cost, as compared to other additive manufacturing (AM) techniques. Despite the capacity of building medium to large-scale components by PAM, the heat-transfer behavior could be significantly influenced by component size (or build height) during processing. Understanding this build size effect on heat transfer is critical to predict the microstructure and mechanical properties and optimize the processing parameters. In the present work, the site-specific evolutions of the temperature and residual stresses along the build height were investigated under varying energy densities during PAM processing. A finite element method (FEM) was used to discretize and solve the thermomechanical partial differential equations (expressing the conservation of energy and momentum) governing the plasma arc additive manufacturing process. We studied the transient temperature and subsequent thermally induced residual-stress fields in PAM 304 stainless steel components with different deposition heights. Our study provides general insight into the residual-stress development in wire-based additively manufactured engineering materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. W.E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28.10.1007/s11665-014-0958-z ↗
2. S. Peng, S. Mooraj, R. Feng, L. Liu, J. Ren, Y. Liu, F. Kong, Z. Xiao, C. Zhu and P. K. Liaw, Scripta Materialia, 190, 46-51.10.1016/j.scriptamat.2020.08.028 ↗
3. A. Gross, P. Pantidis, K. Bertoldi, and S. Gerasimidis: J. Mech. Phys. Solids., 2019, vol. 124, pp. 577–98.10.1016/j.jmps.2018.11.007 ↗
4. H. Choo, K.-L. Sham, J. Bohling, A. Ngo, X. Xiao, Y. Ren, P. J. Depond, M. J. Matthews and E. Garlea, Materials & Design, 2019, 164, 107534.10.1016/j.matdes.2018.12.006 ↗
5. H. Choo, M. R. Koehler, L. P. White, Y. Ren, D. Morin and E. Garlea, Materials Science and Engineering: A, 2020, 139637.10.1016/j.msea.2020.139637 ↗
6. S. Kumar, R. Kamath, P. Nandwana, Y. Chen and S. Babu, Materialia, 2020, 14, 100883.10.1016/j.mtla.2020.100883 ↗
7. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, and T.T. Roehling: Nat. Mater., 2018, vol. 17, pp. 63–71.10.1038/nmat5021 ↗
8. J. Li, M. Yi, H. Wu, Q. Fang, Y. Liu, B. Liu, K. Zhou and P. K. Liaw, Materials Science and Engineering: A, 2020, 139736.10.1016/j.msea.2020.139736 ↗
9. E. Cakmak, M. N. Gussev, N. Sridharan, M. H. Seren, K. An, H. Wang and K. A. Terrani, Materials Science and Engineering: A, 2020, 770, 138533.10.1016/j.msea.2019.138533 ↗
10. Y. Zhang, L. Wu, X. Guo, S. Kane, Y. Deng, Y.-G. Jung, J.-H. Lee, and J. Zhang: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1–13.10.1007/s11665-017-2747-y ↗
11. P. Parandoush and D. Lin: Compos. Struct., 2017, vol. 182, pp. 36–53.10.1016/j.compstruct.2017.08.088 ↗
12. B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, M. Hofmann, and D.J. Jarvis: Mater. Des., 2016, vol. 89, pp. 559–67.10.1016/j.matdes.2015.09.115 ↗
13. Y. M. Wang, T. Voisin, J. T. McKeown, J. Ye, N. P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T. T. Roehling, R. T. Ott, M. K. Santala, Philip J. Depond, M. J. Matthews, A. V. Hamza and T. Zhu, Nature Materials, 2018, 17, 63-71.10.1038/nmat5021 ↗
14. J. Ren, C. Mahajan, L. Liu, D. Follette, W. Chen, and S. Mukherjee: Metals., 2019, vol. 9, p. 1029.10.3390/met9101029 ↗
15. C. Li, Z.Y. Liu, X.Y. Fang, and Y.B. Guo: Procedia CIRP., 2018, vol. 71, pp. 348–53.10.1016/j.procir.2018.05.039 ↗
16. J.G. Michopoulos, A.P. Iliopoulos, J.C. Steuben, A.J. Birnbaum, and S.G. Lambrakos: Addit. Manuf., 2018, vol. 22, pp. 784–99.
17. X. Wang and K. Chou, In Proceedings of the 26th International Solid Freeform Fabrication Symposium, (2015), pp. 1463-74.
18. T. Mukherjee, W. Zhang, and T. DebRoy: Comput. Mater. Sci., 2017, vol. 126, pp. 360–72.10.1016/j.commatsci.2016.10.003 ↗
19. G. Vastola, G. Zhang, Q.X. Pei, and Y.W. Zhang: Addit. Manuf., 2016, vol. 12, pp. 231–9.
20. P. Hou, Y. Li, D. Chae, Y. Ren, K. An, and H. Choo: Materialia., 2021, vol. 15, p. 100952.10.1016/j.mtla.2020.100952 ↗
21. W. Chen, T. Voisin, Y. Zhang, J.-B. Florien, C.M. Spadaccini, D.L. McDowell, T. Zhu, and Y.M. Wang: Nat. Commun., 2019, vol. 10, pp. 1–12.10.1038/s41467-018-07882-8 ↗
22. J.D. Roehling, W.L. Smith, T.T. Roehling, B. Vrancken, G.M. Guss, J.T. McKeown, M.R. Hill, and M.J. Matthews: Addit. Manuf., 2019, vol. 28, pp. 228–35.
23. L. Cheng, X. Liang, J. Bai, Q. Chen, J. Lemon, and A. To: Addit. Manuf., 2019, vol. 27, pp. 290–304.
24. J. Gordon, C. Haden, H. Nied, R. Vinci, and D. Harlow: Mater. Sci. Eng., A., 2018, vol. 724, pp. 431–8.10.1016/j.msea.2018.03.075 ↗
25. J. Ning, D.E. Sievers, H. Garmestani, and S.Y. Liang: Appl. Phys. A., 2019, vol. 125, p. 496.10.1007/s00339-019-2782-7 ↗
26. Z. Luo and Y. Zhao: Addit. Manuf., 2018, vol. 21, pp. 318–32.
27. Y. Zhao, Y. Jia, S. Chen, J. Shi and F. Li, Additive Manufacturing, 2020, 32, 100935.10.1016/j.addma.2019.100935 ↗
28. M.-P. Hong and Y.-S. Kim: Materials., 2020, vol. 13, p. 5516.10.3390/ma13235516 ↗
29. P. Ninpetch, P. Kowitwarangkul, S. Mahathanabodee, P. Chalermkarnnon and P. Ratanadecho, In AIP Conference Proceedings, (AIP Publishing LLC: 2020), p. 050002
30. E. Mirkoohi, H.-C. Tran, Y.-L. Lo, Y.-C. Chang, et al.: Curr. Comput.-Aided Drug Des., 2020, vol. 10, p. 337.
31. H.-O. Zhang, F.-R. Kong, G.-L. Wang, and L.-F. Zeng: J. Appl. Phys., 2006, vol. 100, p. 123522.10.1063/1.2399341 ↗
32. L. Johnson, M. Mahmoudi, B. Zhang, R. Seede, X. Huang, J.T. Maier, H.J. Maier, I. Karaman, A. Elwany, and R. Arróyave: Acta Mater., 2019, vol. 176, pp. 199–210.10.1016/j.actamat.2019.07.005 ↗
33. S. Liu, H. Zhu, G. Peng, J. Yin, and X. Zeng: Mater. Des., 2018, vol. 142, pp. 319–28.10.1016/j.matdes.2018.01.022 ↗
34. J. Lin, Y. Lv, Y. Liu, B. Xu, Z. Sun, Z. Li, and Y. Wu: Mater. Des., 2016, vol. 102, pp. 30–40.10.1016/j.matdes.2016.04.018 ↗
35. M. Li, T. Lu, J. Dai, X. Jia, X. Gu, and T. Dai: Mater. Sci. Eng. A., 2020, vol. 770, p. 138523.10.1016/j.msea.2019.138523 ↗
36. M. Megahed, H.-W. Mindt, N. N’Dri, H. Duan, and O. Desmaison: Integrating Materials and Manufacturing Innovation., 2016, vol. 5, pp. 61–93.10.1186/s40192-016-0047-2 ↗
37. T.I. Zohdi: Comput. Mech., 2015, vol. 56, pp. 613–30.10.1007/s00466-015-1191-9 ↗
38. M.S. Sawant, N.K. Jain and S.H. Nikam, Int. J. Mech. Sci., 2019, 164, 105166.10.1016/j.ijmecsci.2019.105166 ↗
39. F. Montevecchi, G. Venturini, N. Grossi, A. Scippa, and G. Campatelli: Addit. Manuf., 2017, vol. 18, pp. 145–55.
40. Y. Liu, Y. Yang, and D. Wang: The International Journal of Advanced Manufacturing Technology., 2016, vol. 87, pp. 647–56.10.1007/s00170-016-8466-y ↗
41. I. Serrano-Munoz, T. Fritsch, T. Mishurova, A. Trofimov, D. Apel, A. Ulbricht, A. Kromm, R. Hesse, A. Evans, and G. Bruno: J. Mater. Sci., 2021, vol. 56, pp. 5845–67.10.1007/s10853-020-05553-y ↗
42. T.L. Bergman, F.P. Incropera, A.S. Lavine, and D.P. DeWitt: Introduction to heat transfer, Wiley, New York, 2011.
43. Y.-H. Siao and C.-D. Wen, Mater. Today Commun. 2021, 27, 102425.10.1016/j.mtcomm.2021.102425 ↗
44. J. Goldak, A. Chakravarti, and M. Bibby: Metall. Trans. B., 1984, vol. 15, pp. 299–305.10.1007/BF02667333 ↗
45. Y. Kawahito, N. Matsumoto, Y. Abe, and S. Katayama: J. Mater. Process. Technol., 2011, vol. 211, pp. 1563–8.10.1016/j.jmatprotec.2011.04.002 ↗
46. M. Tanaka and J.J. Lowke: J. Phys. D Appl. Phys., 2006, vol. 40, p. R1.10.1088/0022-3727/40/1/R01 ↗
47. A. Joseph, D. Harwig, D.F. Farson, and R. Richardson: Sci. Technol. Weld. Joining., 2003, vol. 8, pp. 400–6.10.1179/136217103225005642 ↗
48. J.C. Steuben, A.P. Iliopoulos, and J.G. Michopoulos: Comput. Aided Des., 2016, vol. 77, pp. 107–19.10.1016/j.cad.2016.04.003 ↗
49. J. Chen, X. Yu, R.G. Miller, and Z. Feng: Sci. Technol. Weld. Joining., 2015, vol. 20, pp. 181–8.10.1179/1362171814Y.0000000270 ↗
50. J. Davis, K. Mills and S. Lampman, (ASM International, Materials Park, p. 1063, 1990).
51. C. Ho, West Lafayette, IN, 1996.
52. J. M. Holt, Structural alloys handbook, CINDAS/Purdue University, 1996.
53. J. R. Davis, K. Mills and S. Lampman, ASM International, Materials Park, OH, 1990. 1063, 1990
54. R.G. Keanini and B. Rubinsky: Int. J. Heat Mass Transf., 1993, vol. 36, pp. 3283–98.10.1016/0017-9310(93)90011-T ↗
55. M.H. Farshidianfar, A. Khajepour, and A.P. Gerlich: J. Mater. Process. Technol., 2016, vol. 231, pp. 468–78.10.1016/j.jmatprotec.2016.01.017 ↗
56. P. Nie, O.A. Ojo, and Z. Li: Acta Mater., 2014, vol. 77, pp. 85–95.10.1016/j.actamat.2014.05.039 ↗
57. J. Shao, G. Yu, X. He, S. Li, R. Chen, and Y. Zhao: Opt. Laser Technol., 2019, vol. 119, p. 105662.10.1016/j.optlastec.2019.105662 ↗
58. S. Mooraj, Z. Qi, C. Zhu, J. Ren, S. Peng, L. Liu, S. Zhang, S. Feng, F. Kong, Y. Liu, E. B. Duoss, S. Baker and W. Chen, Nano Research, 2020.
59. C. Kumara, A.R. Balachandramurthi, S. Goel, F. Hanning, and J. Moverare: Materialia., 2020, vol. 13, p. 100862.10.1016/j.mtla.2020.100862 ↗
60. G. Sun, R. Zhou, J. Lu, and J. Mazumder: Acta Mater., 2015, vol. 84, pp. 172–89.10.1016/j.actamat.2014.09.028 ↗
61. A. Bartlett, A.G. Evans, and M. Rühle: Acta Metall. Mater., 1991, vol. 39, pp. 1579–85.10.1016/0956-7151(91)90245-V ↗
62. I. Yadroitsev and I. Yadroitsava: Virtual and Physical Prototyping., 2015, vol. 10, pp. 67–76.10.1080/17452759.2015.1026045 ↗
63. B. Vrancken, R. K. Ganeriwala and M. J. Matthews, Acta Materialia, 2020.
64. T. Mukherjee, J.S. Zuback, W. Zhang, and T. DebRoy: Comput. Mater. Sci., 2018, vol. 143, pp. 325–37.10.1016/j.commatsci.2017.11.026 ↗
65. K. Shah, I.U. Haq, S.A. Shah, F.U. Khan, M.T. Khan, and S. Khan: Sci. World J., 2014, vol. 2014, p. 2014.
66. C. Zhang, Y. Li, M. Gao, and X. Zeng: Mater. Sci. Eng., A., 2018, vol. 711, pp. 415–23.10.1016/j.msea.2017.11.084 ↗
67. W. Woo, D.-K. Kim, E.J. Kingston, V. Luzin, F. Salvemini, and M.R. Hill: Mater. Sci. Eng. A., 2019, vol. 744, pp. 618–29.10.1016/j.msea.2018.12.078 ↗