journal article·2021-10Open access

Influence of Cold Rotary Swaging on Microstructure and Uniaxial Mechanical Behavior in Alloy 718

Alexander Klumpp, Alexander Kauffmann, Sascha Seils, Stefan Dietrich, Volker Schulze

Abstract

Abstract In this study, the influence of cold rotary swaging on microstructure and mechanical properties of the precipitation-strengthened nickel-based superalloy 718 (Alloy 718) was investigated. The initial stages of work-hardening were characterized by means of microhardness, electron backscatter diffraction (EBSD), and X-ray diffraction (XRD) analyses. Furthermore, attention was devoted to the mechanical behavior at ambient and elevated temperature (550 °C) in uniaxial tension and compression. Rotary swaging to different true strains of maximum$$\varphi = 0.91$$caused a moderate increase of microhardness and enhanced markedly the load-bearing capacity in tension, giving rise to yield strength beyond 2000 MPa. The mechanical strength$$Rp0.2$$in tension subsequent to rotary swaging perfectly correlates with increasing dislocation density$$\rho $$estimated from XRD in the form of a Taylor-like relationship$$Rp0.2 \propto \sqrt{\rho }$$. In compression, transient stress–strain evolution without the occurrence of a clear elastic range and distinct yield phenomenon was observed. Restoration of the elastic range, accompanied by a pronounced increase of microhardness, was obtained by a post-swaging tempering treatment at 600 °C.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. D. Fournier and A. Pineau: Metall. Trans. A, 1977, vol. 8A, pp. 1095–105.10.1007/BF02667395 ↗
2. J.J. Debarbadillo and S.K. Mannan: JOM, 2012, vol. 64(2), pp. 265–70.10.1007/s11837-012-0238-z ↗
3. Y. Mei, Y. Liu, C. Liu, C. Li, L. Yu, Q. Guo, and H. Li: J. Alloys Compd., 2015, vol. 649, pp. 949–60.10.1016/j.jallcom.2015.07.149 ↗
4. Y. Lin, D.G. He, M.S. Chen, X.M. Chen, C.Y. Zhao, X. Ma, and Z.L. Long: Mater. Des., 2016, vol. 97, pp. 13–24.10.1016/j.matdes.2016.02.052 ↗
5. Y.T. Chen, A.C. Yeh, M.Y. Li, and S.M. Kuo: Mater. Des., 2017, vol. 119, pp. 235–43.10.1016/j.matdes.2017.01.069 ↗
6. K. Praveen, G. Sastry, and V. Singh: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 65–78.10.1007/s11661-007-9375-3 ↗
7. S. Kalluri, K. Rao, G. Halford and M. McGaw. In: Superalloys 718, 625, 706 and Various Derivatives, 1997, pp. 595–606.10.7449/1997/Superalloys_1997_595_606 ↗
8. H. Zhang, C. Li, Q. Guo, Z. Ma, Y. Huang, H. Li, and Y. Liu: Mater. Sci. Eng. A, 2018, vol. 722, pp. 136–46.10.1016/j.msea.2018.02.093 ↗
9. J. Oblak, D. Paulonis, and D. Duvall: Metall. Trans., 1974, vol. 5, p. 143–53.10.1007/BF02642938 ↗
10. S. Kalluri, K.B.S. Rao, G.R. Halford, and M. McGaw. In: Superalloys 718, 625, 706 and Various Derivatives, 1994, pp. 593–606.10.7449/1994/Superalloys_1994_593_606 ↗
11. W. Liu, F. Xiao, M. Yao, Z. Chen, Z. Jiang, and S. Wang: Scripta Mater., 1997, vol. 37(1), pp. 53–57.10.1016/S1359-6462(97)00062-6 ↗
12. W. Liu, M. Yao, and Z. Chen: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 31–40.10.1007/s11661-999-0193-7 ↗
13. K. Praveen and V. Singh: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 79–86.10.1007/s11661-007-9378-0 ↗
14. B.J. Bond and R.L. Kennedy. In: Sixth International Special Emphasis Symposium on Superalloys 718, 625, 706 and Derivatives, 2006, pp. 203–11.10.7449/2005/Superalloys_2005_203_211 ↗
15. F.Z. Utyashev, R. Mulyukov, R. Sukhorukov, and V. Valitov: Mater. Sci. Forum Trans. Tech. Publ., 2016, vol. 838, pp. 615–20.10.4028/www.scientific.net/MSF.838-839.615 ↗
16. V. Schulze: Modern Mechanical Surface Treatment: States, Stability, Effects, Wiley, New York, 2006.
17. P.S. Prevéy: In: Proceedings of the 2nd ASM Materials Solutions Conference & Exposition, 2000, pp. 426–34.
18. P.C. Yadav, S. Sahu, A. Subramaniam, and S. Shekhar: Mater. Sci. Eng. A, 2018, vol. 715, pp. 295–306.10.1016/j.msea.2018.01.007 ↗
19. A. Klumpp, S. Maier, H. Chen, M. Fotouhi, R. Schneider, S. Dietrich, K.H. Lang, and V. Schulze: Int. J. Fatigue, 2018, vol. 116, pp. 257–67.10.1016/j.ijfatigue.2018.06.033 ↗
20. D. Worthem, I. Robertson, F. Leckie, D. Socie, and C. Altstetter: Metall. Trans. A, 1990, vol. 21A, pp, 3215–20.10.1007/BF02647316 ↗
21. L. Xiao, D. Chen, and M. Chaturvedi: Scripta Mater., 2005, vol. 52(7), pp. 603–607.10.1016/j.scriptamat.2004.11.023 ↗
22. U.F. Kocks, C.N. Tomé, and H.R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, 2000.
23. A. Benghalem and D. Morri: Acta Metall. Mater., 1994, vol. 42, pp. 4071–81.10.1016/0956-7151(94)90184-8 ↗
24. C. Kumara, D. Deng, J. Moverare, and P. Nylén: Mater. Sci. Technol., 2018, vol. 34(5), pp. 529–37.10.1080/02670836.2018.1426258 ↗
25. G.K. Williamson and R.E. Smallman: Philos. Mag., 1956, vol. 1(1), pp. 34–46.10.1080/14786435608238074 ↗
26. P.J. Withers and H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17(4), pp. 366–75.10.1179/026708301101510087 ↗
27. J. Hoffmeister, V. Schulze, R. Hessert, and G. Koenig: Int. J. Mater. Res., 2012, vol. 103(1), pp. 66–72.10.3139/146.110630 ↗
28. A. Franceschi, J. Stahl, C. Kock, R. Selbmann, S. Ortmann-Ishkina, A. Jobst, M. Merklein, B. Kuhfuß, M. Bergmann, B.A. Behrens et al.: Arch. Appl. Mech., 2021. https://doi.org/10.1007/s00419-021-01903-7.10.1007/s00419-021-01903-7 ↗
29. C.C. Li, J. Flasck, J. Yaker, and W. Leslie: Metall. Trans. A , 1978, vol. 9A, pp. 85–89.10.1007/BF02647175 ↗
30. M. Mataya, M. Carr, and G. Krauss: Mater. Sci. Eng., 1983, vol. 57(2), pp. 205–22.10.1016/0025-5416(83)90211-2 ↗
31. M. Richards, C. Van Tyne, and D. Matlock: Mater. Sci. Eng. A, 2011, vol. 528(27), pp. 7926–32.10.1016/j.msea.2011.07.015 ↗
32. S. Semiatin, P. Fagin, B. Streich, R. Goetz, and V. Venkatesh: In: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, Springer, 2018, pp. 957–75.10.1007/978-3-319-89480-5_64 ↗
33. C. Hale, W. Rollings, and M. Weaver: Mater. Sci. Eng. A, 2001, vol. 300(1–2), pp. 153–64.10.1016/S0921-5093(00)01470-2 ↗
34. S. Nalawade, M. Sundararaman, R. Kishore, and J. Shah: Scripta Mater., 2008, vol. 59(9), pp. 991–94.10.1016/j.scriptamat.2008.07.004 ↗
35. G.I. Taylor: Proc. R. Soc. Lond. Ser. A, 1934, vol. 145, pp. 362–87.10.1098/rspa.1934.0106 ↗
36. C. Blankenship Jr. and M. Henry: Scripta Mater., 1996, vol. 34(9), pp. 1461–66.10.1016/1359-6462(95)00681-8 ↗
37. M. Clavel, D. Fournier, and A. Pineau: Metall. Mater. Trans. A, 1975, vol. 6A, pp. 2305–307.10.1007/BF02818660 ↗
38. L. Zheng, G. Schmitz, Y. Meng, R. Chellali, and R. Schlesiger: Crit. Rev. Solid State Mater. Sci., 2012, vol. 37(3), pp. 181–214.10.1080/10408436.2011.613492 ↗