journal article·2021-08

Tailoring the Microstructure of Coarse-Grained HAZ in Steel for Large Heat Input Welding: Effect of Ti–Mg–Ce–V Inclusion/Precipitation Particles

Chao Wang, Junjie Hao, Jian Kang, Guo Yuan, R. Devesh K. Misra, Guodong Wang

Publisher page

Abstract

In this study, a novel Ti–Mg–Ce–V-treated steel was designed for large heat input welding. The addition of Ce in Ti → Mg deoxidation process ensured sufficient Ti–Mg–Ce oxide inclusions in steel. The complex precipitation of V further improved the nucleation ability of ferrite. At simulated heat input of 500 kJ/cm, significant austenite pinning effect and intragranular ferrite nucleation were realized concurrently. A fine-grained microstructure with high impact toughness was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J.H. Shim, Y.J. Oh, J.Y. Suh, Y.W. Cho, J.D. Shim, J.S. Byun, and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2115–22.10.1016/S1359-6454(01)00134-3 ↗
2. J.S. Byun, J.H. Shim, Y.W. Cho, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 1593–606.10.1016/S1359-6454(02)00560-8 ↗
3. Y. Kang, S. Jeong, J.H. Kang, and C. Lee: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 2842–54.10.1007/s11661-016-3456-0 ↗
4. K. Nakayama, Y. Kisaka, F. Kimura, and H. Terasaki: Q. J. Jpn. Weld. Soc., 2020, vol. 38, pp. 229–33.10.2207/qjjws.38.229 ↗
5. M.A. Van Ende, M. Guo, R. Dekkers, M. Burty, J. Van Dyck, P.T. Jones, B. Blanpain, and P. Wollants: ISIJ Int., 2009, vol. 49, pp. 1133–40.10.2355/isijinternational.49.1133 ↗
6. M.M. Song, C.L. Hu, B. Song, H.Y. Zhu, Z.L. Xue, and R.S. Xu: Steel Res. Int., 2018, vol. 89, p. 1700355.10.1002/srin.201700355 ↗
7. F. Chai, C.F. Yang, H. Su, Y.Q. Zhang, and Z. Xu: J. Iron Steel Res. Int., 2009, vol. 16, pp. 69–74.10.1016/S1006-706X(09)60013-3 ↗
8. Y. Liu, X.L. Wan, G.Q. Li, Y. Wang, W. Zheng, and Y.H. Hou: Sci. Technol. Weld. Join., 2019, vol. 24, pp. 43–51.10.1080/13621718.2018.1476804 ↗
9. H. Guo, S. Yang, J. Li, M. Zhao, Z. Chen, X. Zhang, and J. Li: JOM., 2018, vol. 70, pp. 1136–42.10.1007/s11837-018-2892-2 ↗
10. Y. Min, X. Li, Z. Yu, C. Liu, and M. Jiang: Steel Res. Int., 2016, vol. 87, pp. 1503–10.10.1002/srin.201500440 ↗
11. C.K. Lin, Y.C. Pan, Y.H.F. Su, G.R. Lin, W.S. Hwang, and J.C. Kuo: Mater. Charact., 2018, vol. 141, pp. 318–27.10.1016/j.matchar.2018.05.005 ↗
12. L.Y. Xu, J. Yang, R.Z. Wang, W.L. Wang, and Y.N. Wang: J. Iron Steel Res. Int., 2018, vol. 25, pp. 433–41.10.1007/s42243-018-0054-y ↗
13. C.K. Lin, Y.H. Su, W.S. Hwang, G.R. Lin, and J.C. Kuo: Mater. Sci. Technol., 2018, vol. 34, pp. 596–606.10.1080/02670836.2017.1421037 ↗
14. K. Sakata and H. Suito: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 1213–23.10.1007/s11661-000-0117-z ↗
15. H. Nako, Y. Okazaki, and J.G. Speer: ISIJ Int., 2015, vol. 55, pp. 250–6.10.2355/isijinternational.55.250 ↗
16. Z. Adabavazeh, W.S. Hwang, and Y.H. Su: Sci. Rep., 2017, vol. 7, p. 46503.10.1038/srep46503 ↗
17. G. Thewlis: Mater. Sci. Technol., 2006, vol. 22, pp. 153–66.10.1179/026708306X81432 ↗
18. M.M. Song, Y.M. Xie, B. Song, Z.L. Xue, N. Nie, C.L. Hu, and R.S. Xu: High Temp. Mater. Process. (Lond.), 2019, vol. 38, pp. 362–69.10.1515/htmp-2017-0175 ↗
19. R. Geng, J. Li, and C. Shi: Ironmak. Steelmak., 2021. https://doi.org/10.1080/03019233.2020.1869411.10.1080/03019233.2020.1869411 ↗
20. J.Y. Cho, D.W. Suh, J.H. Kang, and H.C. Lee: ISIJ Int., 2002, vol. 42, pp. 1321–3.10.2355/isijinternational.42.1321 ↗
21. T. Sharma, N.N. Kumar, R. Mondal, K.V.M. Krishna, I. Samajdar, and V. Kain: J. Mater. Eng. Perform., 2019, vol. 28, pp. 4275–88.10.1007/s11665-019-04173-1 ↗
22. C. Wang, X. Wang, J. Kang, G. Yuan, and G.D. Wang: J. Iron Steel Res. Int., 2020, vol. 27, pp. 440–50.10.1007/s42243-019-00317-8 ↗
23. K. Zhu and Z. Yang: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 2207–13.10.1007/s11661-011-0647-6 ↗
24. L.Y. Xu, J. Yang, R.Z. Wang, Y.N. Wang, and W.L. Wang: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 3354–64.10.1007/s11661-016-3535-2 ↗
25. Z. Wu, W. Zheng, G. Li, H. Matsuura, and F. Tsukihashi: Metall. Mater. Trans. B., 2015, vol. 46B, pp. 1226–41.10.1007/s11663-015-0311-4 ↗
26. Z. Shi, X. Chai, F. Chai, H. Su, T. Pan, Q. Wang, R. Wang, and C. Yang: Mater. Lett., 2016, vol. 175, pp. 266–70.10.1016/j.matlet.2016.04.033 ↗
27. G. Miyamoto, T. Shinyoshi, J. Yamaguchi, T. Furuhara, T. Maki, and R. Uemori: Scripta Mater., 2003, vol. 48, pp. 371–7.10.1016/S1359-6462(02)00451-7 ↗
28. W.Z. Mu, P.G. Jönsson, and K. Nakajima: J. Mater. Sci., 2016, vol. 51, pp. 2168–80.10.1007/s10853-015-9527-6 ↗