Evolution of Microstructure and Mechanical Properties of As-Cast AlxCrFe2Ni2 High-Entropy Alloys with Al Content
Source abstract
Abstract
This study designed a series of low-cost AlxCrFe2Ni2 high-entropy alloys with different Al contents (x = 0.1-1.0 at.) and investigated their microstructure and mechanical properties. The XRD analysis revealed that, with an increase in the Al content, their crystalline structures changed from the initial single face-centered cubic (FCC) one to FCC plus body-centered cubic (BCC) and ordered BCC (B2) structures. The tensile strength and hardness first increased and then dropped with increasing Al content related to the volume fraction of the FCC/BCC phase. At x = 0.9, the as-cast alloy containing 49.1 pct BCC phase exhibited the highest ultimate tensile strength of 1278 MPa with a 12.6 pct ductility. With an increase in the Al content, the alloy fracture mechanism changed from ductile fracture to brittle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. [1] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299-303.10.1002/adem.200300567 ↗
2. [2] B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, vol. 375–377, pp.213–218.10.1016/j.msea.2003.10.257 ↗
3. [3] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie: Science, 2014, vol. 345, pp. 1153–1158.10.1126/science.1254581 ↗
4. [4] H. Luo, Z. Li, A.M. Mingers, and D. Raabe: Corros. Sci., 2018, vol. 134, pp. 131–139.10.1016/j.corsci.2018.02.031 ↗
5. [5] M.C. Gao, J.W. Yeh, P.K. Liaw, and Y. Zhang: High-entropy alloys: Fundmentals and Applications, 1st ed., Springer, Cham, Switzerland,2016, pp.248-259.10.1007/978-3-319-27013-5 ↗
6. X.H. Du, W.P. Li, H.T. Chang, T. Yang, G.S. Duan, B.L. Wu, J.C. Huang, F.R. Chen, C.T. Liu, W.S. Chuang, Y. Lu, M.L. Sui, and E.W. Huang: Nat. Commun., 2020, vol. 11, pp. 2390.10.1038/s41467-020-16085-z ↗
7. [7] P. Sathiyamoorthi, and H.S. Kim: Progress in Materials Science, 2020, 10.1016/j.pmatsci.2020.100709, In press.10.1016/j.pmatsci.2020.100709 ↗
8. Y. P. Lu, H. T. Huang, X. Z. Gao, C. L. Ren, J. Gao, H. Z. Zhang, S. J. Zheng, Q. Q. Jin, Y. H. Zhao, C. Y. Lu, T. M. Wang, and T. J. Li: J. Mater. Sci. Technol., 2019, vol. 35, pp. 369–373.10.1016/j.jmst.2018.09.034 ↗
9. [9] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu: Prog. Mater. Sci., 2014, vol. 61, pp. 1-93.10.1016/j.pmatsci.2013.10.001 ↗
10. O.N. Senkov, S. Gorsse, and D.B. Miracle: Acta Mater., 2019 vol. 175, pp. 394-405.10.1016/j.actamat.2019.06.032 ↗
11. [11] O.N. Senkov, A.L. Pilchak, and S.L. Semiatin: Metall. Mater. Trans. A, 2018 vol. 49 pp. 2876-2892.10.1007/s11661-018-4646-8 ↗
12. [12] H.T. Jeong, H.K. Park, K. Park, T.W. Na, and W.J. Kim: Mater. Sci. Eng. A, 2019, vol. 756, pp. 528–537.10.1016/j.msea.2019.04.057 ↗
13. [13] W. Wang, W. Wang, S. Wang, Y. Tsai, C. Lai, and J. Yeh: Intermetallics, 2012, vol. 26, pp. 44–51.10.1016/j.intermet.2012.03.005 ↗
14. [14] J.Y. He, W.H. Liu, H. Wang, Y. Wu, X.J. Liu, T.G. Nieh, and Z.P. Lu: Acta Mater., 2014, vol. 62, pp. 105–113.10.1016/j.actamat.2013.09.037 ↗
15. [15] A. Asabre, A. Kostka, O. Stryzhyboroda, J. Pfetzing-Micklich, U. Hecht, and G. Laplanche: Mater. Des., 2019, vol. 184, pp. 108201.10.1016/j.matdes.2019.108201 ↗
16. F. Meng, J. Qiu, and I. Baker: Mater. Sci. Eng. A, 2013, vol. 586, pp. 45–52.10.1016/j.msea.2013.08.005 ↗
17. [17] X. Jin, Y. Liang, J. Bi, and B. Li: J. Alloys Compd., 2019, vol. 798, pp. 243–248.10.1016/j.jallcom.2019.05.211 ↗
18. [18] U. Sunkari, S.R. Reddy, K.S. Athira, S. Chatterjee, and P.P. Bhattacharjee: Mater. Sci. Eng. A, 2020, vol. 793, pp. 139897.10.1016/j.msea.2020.139897 ↗
19. [19] K.S. Ming, X.F. Bi, and J. Wang: Scr. Mater., 2017, vol. 137, pp. 88-93.10.1016/j.scriptamat.2017.05.019 ↗
20. [20] D.X. Wei, X.Q. Li, W.C. Heng, Y. Koizumi, F. He, W.M. Choi, B.J. Lee, H.S. Kim, H. Kato, and A. Chiba: Mater. Res. Lett., 2019, vol. 7, pp. 82-88.10.1080/21663831.2018.1553803 ↗
21. [21] N. Liu, W. Ding, X.J. Wang, C. Mu, J.J. Du, and L.X. Liu: Metall. Mater. Trans. A, 2020, vol. 51, pp. 2990–2997.10.1007/s11661-020-05751-y ↗
22. [22] Y. Koizumi, T. Nukaya, S. Suzuki, S. Kurosu, Y. Li, H. Matsumoto, K. Sato, Y. Tanaka, A. Chiba: Acta Mater., 60 (2012), pp. 2901-2915.10.1016/j.actamat.2012.01.054 ↗
23. [23] C. Niu, A.J. Zaddach, C.C. Koch, D.L. Irving: J. Alloy. Compd., 672 (2016), pp. 510–520.10.1016/j.jallcom.2016.02.108 ↗
24. [24] Z.G. Zhu, K.H. Ma, X. Yang, C.H. Shek: J. Alloys Compd., 695 (2017), pp. 2945–2950.10.1016/j.jallcom.2016.11.376 ↗
25. [25] Y. Dong, X.X. Gao, Y.P. Lu, T.M. Wang, and T.J. Li: Mater. Lett., 2016, vol. 169, pp. 62–64.10.1016/j.matlet.2016.01.096 ↗
26. [26] M. Ogura, T. Fukushima, R. Zeller, and P.H. Dederichs: J. Alloys Compd., 2017, vol. 715, pp. 454–459.10.1016/j.jallcom.2017.04.318 ↗
27. [27] S. Elkatatny, M.A.H. Gepreel, A. Hamada, K. Nakamura, K. Yamanaka, and A. Chiba: Mater. Sci. Eng. A, 2019, vol. 759, pp. 380–390.10.1016/j.msea.2019.05.056 ↗
28. ASTM E112-13, Standard test methods for determining average grain size, West Conshohocken, PA(US), ASTM International, February 2014.
29. ASTM E8/E8M-13a, Standard test methods for tension testing of metallic materials, West Conshohocken, PA(US), ASTM International, May 2015.
30. [30] L.J. Santodonato, Y. Zhang, M. Feygenson, C.M. Parish, M.C. Gao, R.J.K. Weber, J.C. Neuefeind, Z.Tang, and P.K. Liaw: Nat. Commun., 2015, vol. 6, pp. 5964-5976.10.1038/ncomms6964 ↗
31. [31] H. K. D.H. Bhadeshia, and R. W. K. Honeycombe, Steels: microstructure and properties, 3rd ed. Oxford, Elsevier, 2006, pp. 71-93.10.1016/B978-075068084-4/50006-6 ↗
32. [32] K. Zhang, and Z. Fu: Intermetallics, 2012, vol. 22, pp. 24–32.10.1016/j.intermet.2011.10.010 ↗
33. [33] S. Guo, and C.T. Liu: Prog. Nat. Sci.: Mater. Int., 2011, vol. 21, pp. 433–446.10.1016/S1002-0071(12)60080-X ↗
34. [34] S. Guo, C. Ng, J. Lu, and C.T. Liu: J. Appl. Phys., 2011, vol. 109, pp. 103505.10.1063/1.3587228 ↗
35. [35] X. Yang, and Y. Zhang: Mater. Chem. Phys., 2012, vol. 132, pp. 233–238.10.1016/j.matchemphys.2011.11.021 ↗
36. [36] Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, and P.K. Liaw: Adv. Eng. Mater., 2008, vol. 10, pp. 534–538.10.1002/adem.200700240 ↗
37. [37] I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3552–3560.10.1016/j.msea.2010.02.041 ↗
38. [38] E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1223–1233.10.1007/s11661-999-0272-9 ↗
39. [39] S. Hong, S.Y. Shin, H.S. Kim, S. Lee, S.K. Kim, K.G. Chin, and N.J. Kim: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1870–1883.10.1007/s11661-011-1007-2 ↗
40. [40] X.Z. Gao, Y.P. Lu, B. Zhang, N.N. Liang, G.Z. Wu, G. Sha, J.Z. Liu, and Y.H. Zhao: Acta Mater., 2017, vol. 141, pp. 59–66.10.1016/j.actamat.2017.07.041 ↗