An Investigation of the Development of Coarse Grains During β Annealing of Hot-Forged Ti-6Al-4V
Source abstract
Abstract
Process variables contributing to the development of non-uniform, coarse grains during β annealing following subtransus conventional forging of the α/β titanium alloy Ti-6Al-4V were investigated using subscale laboratory experiments and simulations of the evolution of the β-phase crystallographic texture. Forging trials comprised the nominally plane-strain sidepressing of cylindrical preforms using a furnace (preheat) temperature of either 1172 K, 1186 K, or 1227 K (899 °C, 913 °C, or 954 °C) and diametral reductions between 40 and 70 pct. Following hot working, cross sections of each workpiece were β annealed for 1 h at 1311 K (1038 °C). Bands of β grains whose size were at least twice that in the surrounding matrix were found to be prevalent in regions whose deformation was close to plane strain for forging experiments involving the highest level of reduction and the highest preheat temperature. Electron backscatter diffraction (EBSD) analysis of the forged-and-heat-treated samples indicated that such regions had developed a strong rotated-cube β microtexture during forging (and the early stages of annealing). This promoted the enhanced growth of a small volume fraction of highly-misoriented grains. These observations were interpreted in the context of coupled (continuum) finite-element method simulations of metal flow during forging and viscoplastic, self-consistent calculations of the concomitant evolution of deformation texture to elucidate the interdependence of forging temperature, phase fractions, strain partitioning between the two phases, and texture evolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. G. Lütjering, Mater. Sci. Eng. A, 1998, vol. A243, pp. 32-45.10.1016/S0921-5093(97)00778-8 ↗
2. G. Luetjering and J.C. Williams: Titanium, Springer, Berlin, 2007.
3. T. Altan, F.W. Boulger, J.R. Becker, N. Akgerman, and H.J. Henning: Forging Equipment, Materials, and Practices, Report MCIC-HB-03, Metals and Ceramics Information Center, Battelle’s Columbus Laboratories, Columbus, OH, 1973.
4. A.M. Sabroff, F.W. Boulger, and H.J. Henning: Forging Materials and Practices, Rheinhold Book Company, New York, 1968.
5. T. Altan: Metal Forming: Fundamentals and Applications, American Society for Metals, Materials Park, OH, 1983.
6. A.L. Pilchak, S. Srivatsa, N.C. Levkulich, V. Sinha, E.J. Payton, and S.L. Semiatin: in MATEC Web of Conferences, 2020, vol. 321.10.1051/matecconf/202032112007 ↗
7. N.E. Byres, J. Quinta da Fonseca, B. Dod, and P.B. Prangnell: in MATEC Web of Conferences, 2020, vol. 321.10.1051/matecconf/202032112043 ↗
8. D. Solas, A. Paris, A.L. Helbert, T. Baudin, F. Brisset, B. Dod, and R. Forestie: in MATEC Web of Conferences, 2020, vol. 321.
9. S.L. Semiatin, Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2593-2625.10.1007/s11661-020-05625-3 ↗
10. N. Bozzolo, A. Agnoli, N. Soua, M. Bernacki, and R.E. Log, Mater. Sci. Forum, 2013, vol. 753, pp. 321-324.10.4028/www.scientific.net/MSF.753.321 ↗
11. V.M. Miller, A.E. Johnson, C.J. Torbet, and T.M. Pollock, Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1566-1574.10.1007/s11661-016-3329-6 ↗
12. K. Li, T. Zou, D. Li, Y. Peng, and D. Shu, Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5734-5749.10.1007/s11661-019-05453-0 ↗
13. P.A. Beck, M.L. Holzworth, and P.R. Sperry, Trans. TMS-AIME, 1949, vol. 180, pp. 163-192.
14. C.G. Dunn and J.L. Walter, in Recrystallization, Grain Growth, and Textures, H. Margolin, ed., ASM, Metals park, OH, 1966, pp. 461–521.
15. M. Hillert, Acta Metall., 1965, vol. 13, pp. 227-238.10.1016/0001-6160(65)90200-2 ↗
16. J Humphreys, G.S. Rohrer, and A. Rollett: Recrystallization and related Annealing Phenomena, Third Edition, Elsevier, Amsterdam, 2017.
17. J.W. Martin, R.D. Doherty, B. Cantor: Stability of Microstructure in Metallic Systems, Second Edition, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
18. G. Abbruzzese, K. Lucke, Acta Metall. 1986, vol.34, pp. 905-914.10.1016/0001-6160(86)90064-7 ↗
19. H. Eichelkraut, G. Abbruzzese, K. Lucke, Acta Metall., 1988, vol. 36, pp. 55-68.10.1016/0001-6160(88)90028-4 ↗
20. O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin, Acta Mater., 2003, vol. 51, pp. 1019-1034.10.1016/S1359-6454(02)00505-0 ↗
21. A.L. Pilchak, G.A. Sargent, and S.L. Semiatin, Metall. Mater. Trans. A, 2018, vol. 49A, pp. 908-919.10.1007/s11661-017-4444-8 ↗
22. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
23. P.J. Noell and E.M. Taleff, Metall. Mater. Trans. A, 2019, vol. 50A, pp. 4608-4619.10.1007/s11661-019-05370-2 ↗
24. O.M. Ivasishin, S.V. Shevchenko, and S.L. Semiatin, Scripta Mater., 2004, vol. 50, pp. 1241-1245.10.1016/j.scriptamat.2004.01.036 ↗
25. E.J. Payton, A.R.C. Gerlt, and A.L. Pilchak: in Proc. Seventh Inter. Conf. on Recrystallization and Grain Growth, J. Phys.: Conf. Ser. 1270 (2019) 012046.10.1088/1742-6596/1270/1/012046 ↗
26. A.L. Pilchak and J.C. Williams, Met. Mater. Trans. A, 2011, vol. 42A, pp. 773-794.10.1007/s11661-010-0434-9 ↗
27. R.A. Lebensohn and C.N. Tome, Acta Metal. Mater., 1993, vol. 41(9), pp. 2611-2624.
28. D. Dunst and H. Mecking, Zeitschrift fur Metallkunde, 1996, vol. 87, pp. 498-507.
29. D. Raabe, Materials Technology, vol. 66, no. 5, 1995, pp. 222-229.
30. D. Raabe and K. Lucke, Materials Science Forum Vols. 157-162 (1994) pp 597-6110.4028/www.scientific.net/MSF.157-162.597 ↗
31. D. Raabe, F. Roters, V. Marx, Texture and Microstructures, 1996, vols. 26-27, pp. 611-635.10.1155/TSM.26-27.611 ↗
32. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds.: Handbook of Workability and Process Design, ASM International, Materials Park, OH, 2003.
33. L. Morris: M.S. Thesis, AFIT-ENY-MS-18-M-310,, Air Force Institute of Technology, Wright-Patterson Air Force base, OH, https://scholar.afit.edu/etd/1780/