journal article·2021-02

In Situ Study on Interrupted Growth Behavior and Crystallography of Bainite

Haijiang Hu, Guang Xu, Muhammad Nabeel, Neslihan Dogan, Hatem S. Zurob

Publisher page

Abstract

The growth behavior and crystallographic orientation of bainite in a low carbon steel were investigated by a combination of in situ observation and electron backscattered diffraction. The intersection of different bainitic ferrite (BF) laths was analyzed in detail. The results show that the growth of a given lath stops when it runs into a preexisting lath of bainitic ferrite. Growth resumes, after a short stasis, through the nucleation of a new lath on the other side of the obstructing lath. The newly nucleated lath has been termed BF-clone because it shares the same crystallographic orientation with the prior bainitic lath. The nucleation of the BF-clone is promoted by the accumulated transformation strain in the region where the growing lath intersected the pre-existing lath. During the growth of the bainitic ferrite laths, the transformation strain was accommodated through the formation of twin-related variant pairs, which formed one after another with the identical lengthening rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. [1] H.I. Aaronson, T. Furuhara, J.M. Rigsbee, W.T. Reynolds, J.M. Howe: Metall. Trans. A, 1990, vol. 21, pp. 2369–2409.10.1007/BF02646984 ↗
2. [2] H.K.D.H. Bhadeshia, D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265–1273.10.1016/0001-6160(80)90082-6 ↗
3. [3] M. Hillert, L. Höglund, J. Ågren: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3693–3700.10.1007/s11661-004-0275-5 ↗
4. [4] G.R. Purdy, M.Hillert: Acta Metall., 1984, vol. 32, pp. 823–828.10.1016/0001-6160(84)90018-X ↗
5. [5] S. Thomas, S. Véronique: Acta Mater., 2013, vol. 61, pp. 2639–2648.10.1016/j.actamat.2013.01.044 ↗
6. [6] D. Quidort, Y.J.M. Brechet: Acta Mater., 2001, vol. 49, pp. 4161–4170.10.1016/S1359-6454(01)00316-0 ↗
7. [7] J. Yin, L. Leach, M. Hillert, A. Borgenstam: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3997–4005.10.1007/s11661-017-4196-5 ↗
8. [8] A.M. Ravi, J. Sietsma, M.J. Santofimia: Acta Mater., 2016, vol. 105, pp. 155–164.10.1016/j.actamat.2015.11.044 ↗
9. [9] A.M. Ravi, A. Navarro-López, J. Sietsma, M.J. Santofimia: Acta Mater., 2020, vol. 188, pp. 394–405.10.1016/j.actamat.2020.02.003 ↗
10. [10] S.M.C. Van Bohemen, J. Sietsma: Int. J. Mater. Res., 2008, vol. 99, pp. 739–747.10.3139/146.101695 ↗
11. [11] H. Chen, A. Borgenstam, J. Odqvist, I. Zuazo, M. Goune, J. Ågren, S. van der Zwaag: Acta Mater., 2013, vol. 61, pp. 4512–4523.10.1016/j.actamat.2013.04.020 ↗
12. [12] S. Kundu, A.K. Verma, V. Sharma: Metall. Mat. Trans. A, 2012, vol. 43, pp. 2552–2565.10.1007/s11661-011-0971-x ↗
13. [13] D. Zhang, H. Terasaki, Y. Komizo: J. Alloys Compd., 2009, vol. 484, pp. 929–933.10.1016/j.jallcom.2009.05.074 ↗
14. [14] P. Kolmskog, A. Borgenstam, M. Hillert, P. Hedström, S.S. Babu, H. Terasaki, Y.I. Komizo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4984–4988.10.1007/s11661-012-1342-y ↗
15. [15] G. Xu, F. Liu, L. Wang, H. Hu: Scripta Mater., 2013, vol. 68, pp. 833–836.10.1016/j.scriptamat.2013.01.033 ↗
16. [16] Z. Hu, G. Xu, H. Hu, L. Wang, Z.L. Xue: Int. J. Miner. Metall. Mater., 2014, vol. 21, pp. 371–378.10.1007/s12613-014-0918-5 ↗
17. [17] T. Furuhara, S. Abe, G. Miyamoto: Mat. Trans., 2018, vol. 59, pp. 214–223.10.2320/matertrans.MC201714 ↗
18. [18] G. Mao, R. Cao, X. Guo, Y. Jiang, J. Chen: Metall. Mat. Trans. A, 2017, vol. 48, pp. 5783–5798.10.1007/s11661-017-4348-7 ↗
19. [19] H. Beladi, V. Tari, I.B. Timokhina, P. Cizek, G.S. Rohrer, A.D. Rollett, P.D. Hodgson: Acta Mater., 2017, vol. 127, pp. 426–437.10.1016/j.actamat.2017.01.058 ↗
20. [20] S. Motomura, Y. Soejima, T. Miyoshi, T. Hara, T. Omori, R. Kainuma, M. Nishida: Microscopy, 2016, vol. 65, pp. 159–168.10.1093/jmicro/dfv363 ↗
21. H.K.D.H. Bhadeshia, D.V. Edmonds: Metall. Trans. A, 1979, 10, 895–907.10.1007/BF02658309 ↗
22. [22] H. Kitahara, R. Ueji, N. Tsuji, Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–1288.10.1016/j.actamat.2005.11.001 ↗
23. [23] T. Nyyssönen, P. Peura, V. Kuokkala: Metall. Mat. Trans. A, 2018, vol. 49, pp. 6426–6441.10.1007/s11661-018-4904-9 ↗
24. [24] H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992, pp. 1–450.
25. [25] E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia, M. Thuvander: Mater. Charact., 2008, vol. 59, pp. 877–882.10.1016/j.matchar.2007.07.011 ↗
26. L. Leach: Modeling bainite formation in steels, PhD thesis, KTH Royal Institute of Technology, 2018.
27. [27] R. Trivedi, G.M. Pound: J. Appl. Phys., 1967, vol. 38, pp. 3569–3576.10.1063/1.1710174 ↗
28. Thermo-Calc Software TCFE10 Steels/Fe-alloys database version 10.
29. [29] J. Ågren: Scripta Metall., 1986, vol. 20, pp. 1507–1510.10.1016/0036-9748(86)90384-4 ↗
30. [30] S. Sainis, H. Farahani, E. Gamsjäger, S. Van der Zwaag: Metals, 2018, vol. 8, pp. 498–529.10.3390/met8070498 ↗
31. [31] H. Beladi, Y. Adachi, I. Timokhina, P.D. Hodgson: Scripta Mater., 2009, vol. 60, pp. 455–458.10.1016/j.scriptamat.2008.11.030 ↗
32. [32] V. Tari, A.D. Rollett, H. Beladi: J. Appl. Cryst., 2013, vol. 46, pp. 210–215.10.1107/S002188981204914X ↗
33. [33] K. Verbeken, L. Barbe, D. Raabe: ISIJ Int., 2009, vol. 49, pp. 1601–1609.10.2355/isijinternational.49.1601 ↗
34. [34] T. Nyyssönen, M. Isakov, P. Peura, V.-T. Kuokkala: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2587–2590.10.1007/s11661-016-3462-2 ↗
35. [35] E. Swallow, H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1996, vol. 12, pp. 121–125.10.1179/mst.1996.12.2.121 ↗
36. [36] G. Miyamoto, A. Shibata, T. Maki, T. Furuhara: Acta Mater., 2009, vol. 57, pp. 1120–1131.10.1016/j.actamat.2008.10.050 ↗
37. [37] X.L. Wan, H.H. Wang, L. Cheng, K.M. Wu: Mater. Charact., 2012, vol. 67, pp. 41–51.10.1016/j.matchar.2012.02.007 ↗
38. [38] S. Morito, X. Huang, T. Furuhara, T. Maki, N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–5331.10.1016/j.actamat.2006.07.009 ↗
39. [39] S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–1799.10.1016/S1359-6454(02)00577-3 ↗
40. [40] A. Lambert-Perlade, A.F. Gourgues, A. Pinueau: Acta Mater., 2004, vol. 52, pp. 2337–2348.10.1016/j.actamat.2004.01.025 ↗
41. [41] V. Pancholi, M. Krishnan, I. Samajdar, V. Yadav, N.B. Ballal: Acta Mater., 2008, vol. 56, pp. 2037–2050.10.1016/j.actamat.2007.12.057 ↗
42. [42] N. Takayama, G. Miyamoto, T. Furuhara: Acta Mater., 2012, vol. 60, pp. 2387–2396.10.1016/j.actamat.2011.12.018 ↗
43. [43] B.B. Wu, Z.Q. Wang, Y.S. Yu, X.L. Wang, C.J. Shang, R.D.K. Misra: Scripta Mater., 2019, vol. 170, pp. 43–47.10.1016/j.scriptamat.2019.05.016 ↗