Confirmation of Dynamically Recrystallized Grains in Hexagonal Zirconium through Local Internal Friction Measurements
Source abstract
Abstract
Fully recrystallized hexagonal Zirconium was subjected to controlled hot compression tests. Deformation above 723 K showed both flow saturation, characteristic of dynamic recovery, and also the presence of fine equiaxed grains, indicating dynamic recrystallization (DRx). Though data from relative work hardening were inconclusive, a combination of transmission Kikuchi diffraction plus transmission electron microscopy clearly confirmed the presence of DRx grains. A separation between the deformed and the DRx grains was not possible with microtexture or nano-indentation data. Local internal friction measurements (or tanδ values), however, clearly distinguished the DRx grains from both statically recrystallized (SRex) and the hot deformed grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. K.L. Murty and I. Charit: Prog. Nucl. Energy, 2006, vol. 48, pp. 325–59.10.1016/j.pnucene.2005.09.011 ↗
2. P. Rudling and B. Kammenzind: Zirconium in the Nuclear Industry: Fourteenth International Symposium, 2005.10.1520/STP1467-EB ↗
3. N. Saibaba: J. Nucl. Mater., 2008, vol. 383, pp. 63–70.10.1016/j.jnucmat.2008.08.045 ↗
4. R.G. Ballinger, G.E. Lucas, and R.M. Pelloux: J. Nucl. Mater., 1984, vol. 126, pp. 53–69.10.1016/0022-3115(84)90532-4 ↗
5. K.V.M. Krishna, S.K. Sahoo, I. Samajdar, S. Neogy, R. Tewari, D. Srivastava, G.K. Dey, G.H. Das, N. Saibaba, and S. Banarjee: J. Nucl. Mater., 2008, vol. 383, pp. 78–85.10.1016/j.jnucmat.2008.08.050 ↗
6. M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, and S.C. Vogel: Acta Mater., 2010, vol. 58, pp. 4053–66.10.1016/j.actamat.2010.03.012 ↗
7. D.L. Bourell and H.J. McQueen: J. Mater. Shap. Technol., 1987, vol. 5, pp. 53–73.10.1007/BF02833686 ↗
8. H. Abe, T. Iwamoto, Y. Yamamoto, S. Nishida, and R. Komatsu: J. Mater. Process. Technol., 2016, vol. 231, pp. 277–87.10.1016/j.jmatprotec.2016.01.001 ↗
9. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty (2007) Thermo-mechanical processing of metallic materials, vol. 11. Elsevier, Amsterdam
10. H.J. McQueen and J.J. Jonas: Recovery and Recrystallization during High Temperature Deformation, vol. 6, Academic Press, Inc., New York 1975.
11. H.J. Mcqueen and J.J. Jonas: J. Appl. Metalwork., 1984, vol. 3, pp. 233–41.10.1007/BF02833651 ↗
12. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
13. K. Huang and R.E. Logé: Mater. Des., 2016, vol. 111, pp. 548–74.10.1016/j.matdes.2016.09.012 ↗
14. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena/F.J. Humphreys and M. Hatherly, 1st ed., Pergamon Oxford, UK, 1995.10.1016/B978-0-08-041884-1.50008-8 ↗
15. G. Gottstein, M. Frommert, M. Goerdeler, and N. Schäfer: Mater. Sci. Eng. A, 2004, 387, pp. 604–08.10.1016/j.msea.2004.02.098 ↗
16. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
17. B. Luan, S. Gao, L. Chai, X. Li, A. Chapuis, and Q. Liu: Mater. Des., 2013, vol. 52, pp. 1065–70.10.1016/j.matdes.2013.06.069 ↗
18. C. Chauvy, P. Barberis, and F. Montheillet: Mater. Sci. Eng. A, 2006, vol. 431, pp. 59–67.10.1016/j.msea.2006.05.031 ↗
19. S.R. Barrabes, M.E. Kassner, M.T. Pérez-Prado, and E. Evangelista: Mater. Sci. Forum, 2004, vol. 467–470, pp. 1145–50.10.4028/www.scientific.net/MSF.467-470.1145 ↗
20. M.T. Pérez-Prado, S.R. Barrabes, M.E. Kassner, and E. Evangelista: Acta Mater., 2005, vol. 53, pp. 581–91.10.1016/j.actamat.2004.10.011 ↗
21. R. Kapoor, G.B. Reddy, and A. Sarkar: Mater. Sci. Eng. A, 2018, vol. 718, pp. 104–10.10.1016/j.msea.2018.01.117 ↗
22. J.K. Chakravartty, R. Kapoor, A. Sarkar, S. Banerjee, P. Barberis, and S.W. Dean: J. ASTM Int., 2010, vol. 7, p. 1–17.10.1520/JAI103003 ↗
23. L.Y. Qian, G. Fang, P. Zeng, and L.X. Wang: Int. J. Press. Vessel. Pip., 2015, vol. 132–133, pp. 43–51.10.1016/j.ijpvp.2015.05.008 ↗
24. S.I. Wright, M.M. Nowell, and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
25. H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, and P.R. Calvillo: Mater. Sci. Eng. A, 2012, vol. 538, pp. 236–45.10.1016/j.msea.2012.01.037 ↗
26. N. Srinivasan, V. Kain, N. Birbilis, K.V. Mani Krishna, S. Shekhawat, and I. Samajdar: Corros. Sci. vol. 100, pp. 544–55, 201510.1016/j.corsci.2015.08.027 ↗
27. G.C. Sneddon, P.W. Trimby, and J.M. Cairney: Mater. Sci. Eng., vol. 110, 1-12, 2016.10.1016/j.mser.2016.10.001 ↗
28. G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
29. A.C. Fischer-Cripps: Nanoindentation, Springer New York, New York, NY, 2004.10.1007/978-1-4757-5943-3 ↗
30. S.R. Cohen and E. Kalfon-Cohen: Beilstein J. Nanotechnol., 2013, vol. 4, pp. 815–33.10.3762/bjnano.4.93 ↗
31. S. Bhowmick, S. Ozden, R.A. Bizão, L.D. Machado, S.A.S. Asif, N.M. Pugno, D.S. Galvão, C.S. Tiwary, and P.M. Ajayan: Carbon N. Y., 2019, vol. 142, pp. 291–9.10.1016/j.carbon.2018.09.075 ↗
32. A. Durgaprasad, S. Giri, S. Lenka, S. Kundu, S. Mishra, S. Chandra, R.D. Doherty, and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4583–97.10.1007/s11661-017-4269-5 ↗
33. S. Bhowmick, Z. Alam, and S.A.S. Asif: Microsc. Microanal., 2016, vol. 22, pp. 1740–1.10.1017/S1431927616009545 ↗
34. B.B. He: Two-Dimensional X-Ray Diffraction, John Wiley & Sons, Inc., Hoboken, NJ, USA, 2009.10.1002/9780470502648 ↗
35. B. Leiss, K. Ullemeyer, and K. Weber: J. Struct. Geol., 2000, 11:1527-2910.1016/S0191-8141(00)00113-9 ↗
36. K. V Mani, R. Raghavan, D. Srivastava, G.K. Dey, S.K. Sahoo, and I. Samjadar: Trans. Indian Inst. Met., 2011, vol. 64, pp. 309–13.10.1007/s12666-011-0063-z ↗
37. V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, A. Satpathy, K.V.M. Krishna, G.K. Dey, D. Srivastav, R. Tewari, and S. Banarjee: J. Nucl. Mater., 2011, vol. 412, pp. 287–93.10.1016/j.jnucmat.2011.02.043 ↗
38. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1223–33.10.1007/s11661-999-0272-9 ↗
39. R.A. Perez, H. Nakajima, and F. Dyment: Mater. Trans., 2003, vol. 44, pp. 2–13.10.2320/matertrans.44.2 ↗
40. C. Zener: Phys. Rev., 1938, vol. 53, pp. 90–9.10.1103/PhysRev.53.90 ↗
41. R.J. McCabe, E.K. Cerreta, A. Misra, G.C. Kaschner, and C.N. Tomé: Philos. Mag., 2006, vol. 86, pp. 3595–611.10.1080/14786430600684500 ↗
42. G.C. Kaschner, C.N. Tomé, I.J. Beyerlein, S.C. Vogel, D.W. Brown, and R.J. McCabe: Acta Mater., 2006, vol. 54, pp. 2887–96.10.1016/j.actamat.2006.02.036 ↗
43. J. Singh, S. Mahesh, S. Roy, G. Kumar, D. Srivastava, G.K. Dey, N. Saibaba, and I. Samajdar: Acta Mater., 2017, vol. 123, pp. 337–49.10.1016/j.actamat.2016.10.049 ↗
44. A. Akhtar: Acta Metall., 1973, vol. 21, pp. 1–11.10.1016/0001-6160(73)90213-7 ↗
45. A.D. Rollett and U.F. Kocks: Solid State Phenom., 1993, vol. 35–36, pp. 1–18.10.4028/www.scientific.net/SSP.35-36.1 ↗
46. S.K. Sahoo, V.D. Hiwarkar, K. V Mani, I. Samajdar, P. Pant, P.K. Pujari, G.K. Dey, D. Srivastav, R. Tiwari, and S. Banerjee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1427–35.10.1016/j.msea.2009.10.066 ↗
47. N. Keskar, S. Mukherjee, K. V Mani, D. Srivastava, G.K. Dey, P. Pant, R.D. Doherty, and I. Samajdar: Acta Mater., 2014, vol. 69, pp. 265–74.10.1016/j.actamat.2014.01.023 ↗
48. S.I. Wright: J. Comput. Microsc. 1993, Vol. 5, pp. 207–21.
49. A. Hadadzadeh, F. Mokdad, M.A. Wells, and D.L. Chen: Mater. Sci. Eng. A, 2018, vol. 709, pp. 285–9.10.1016/j.msea.2017.10.062 ↗
50. H.-J. Bunge: in Texture Analysis in Materials Science, Elsevier, Amsterdam 1982, pp. 351–403.10.1016/B978-0-408-10642-9.50019-2 ↗
51. M.M. Nowell and S.I. Wright: Ultramicroscopy, 2005, vol. 103, pp. 41–58.10.1016/j.ultramic.2004.11.012 ↗
52. S.I. Wright, M.M. Nowell, S.P. Lindeman, P.P. Camus, M. De Graef, and M.A. Jackson: Ultramicroscopy, 2015, vol. 159, pp. 81–94.10.1016/j.ultramic.2015.08.001 ↗
53. M.H. Alvi, S.W. Cheong, H. Weiland, and A.D. Rollett: Mater. Sci. Forum, 2004, vol. 467–470, pp. 357–62.10.4028/www.scientific.net/MSF.467-470.357 ↗
54. A. Lodh, I. Samajdar, R. Tewari, D. Srivastava, G.K. Dey, and P. Pant: Mater. Sci. Forum, 2011, vol. 702–703, pp. 311–4.10.4028/www.scientific.net/MSF.702-703.311 ↗
55. S. V Ramani and P. Rodriguez: Canad. Met. Quart., 1972, vol. 11, pp. 61–7.10.1179/cmq.1972.11.1.61 ↗
56. Y. Yogo, H. Takeuchi, T. Ishikawa, N. Iwata, and K. Nakanishi: Scr. Mater., 2009, vol. 61, pp. 1001–3.10.1016/j.scriptamat.2009.08.003 ↗
57. T.S. Prithiv, P. Bhuyan, S.K. Pradhan, V. Sarma, and S. Mandal: Acta Mater., 2018, vol. 146, pp. 187–201.10.1016/j.actamat.2017.12.045 ↗
58. A. Dehghan-Manshadi, M. Barnett, and P. Hodgson: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1359–70.10.1007/s11661-008-9512-7 ↗
59. C. Zener: Physica, 1949, vol. 15, pp. 111–8.10.1016/0031-8914(49)90033-6 ↗
60. E.J. Savino and E.A. Bisogni: J. Nucl. Mater., 1974, vol. 50, pp. 298–308.10.1016/0022-3115(74)90099-3 ↗
61. A.J. Bedford, P.G. Fuller, and D.R. Miller: J. Nucl. Mater., 1972, vol. 43, pp. 164–74.10.1016/0022-3115(72)90150-X ↗
62. L.T. Miyada-Naborikawa and R. De Batist: Phys. Status Solidi, 1985, vol. 191, pp. 191–98.10.1002/pssa.2210890119 ↗
63. T.O. Erinosho and F.P.E. Dunne: Int. J. Plast., 2015, vol. 71, pp. 170–94.10.1016/j.ijplas.2015.05.008 ↗
64. T.M. Poletika, G.N. Narimanov, and S.V. Kolosov: J. Appl. Mech. Tech. Phys., 2003, vol. 44, pp. 262–70.10.1023/A:1022508829963 ↗
65. S.K. Sahoo: Ph. D. Thesis: Heterogeneous deformation in zirconium-based alloys, 2009, Indian Institute of Technology, Bombay
66. A.A. Salem, S.R. Kalidindi, and R.D. Doherty: Acta Mater., 2003, vol. 51, pp. 4225–37.10.1016/S1359-6454(03)00239-8 ↗
67. C. Chauvy, P. Barbéris, and F. Montheillet: Mater. Sci. Forum, 2004, vol. 467–470, pp. 1151–6.10.4028/www.scientific.net/MSF.467-470.1151 ↗
68. H. Hallberg, M. Wallin, and M. Ristinmaa: Comput. Mater. Sci., 2010, vol. 49, pp. 25–34.10.1016/j.commatsci.2010.04.012 ↗
69. S.H. Zahiri, C.H.J. Davies, and P.D. Hodgson: Scr. Mater., 2005, vol. 52, pp. 299–304.10.1016/j.scriptamat.2004.10.011 ↗
70. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
71. J. Horváth, F. Dyment, and H. Mehrer: J. Nucl. Mater., 1984, vol. 126, pp. 206–14.10.1016/0022-3115(84)90030-8 ↗
72. C. Zener: Phys. Rev., 1947, vol. 71, pp. 34–8.10.1103/PhysRev.71.34 ↗
73. A.H. Barnes and C. Zener: Phys. Rev., 1940, vol. 58, pp. 87–87.10.1103/PhysRev.58.87 ↗
74. C. Zener and J.H. Hollomon: J. Appl. Phys., 1946, vol. 17, pp. 69–82.10.1063/1.1707696 ↗
75. C. Zener: Phys. Rev., 1941, vol. 60, pp. 455–57.10.1103/PhysRev.60.455 ↗
76. F. Povolo and E.A. Bisogni: Acta Metall., 1967, vol. 15, pp. 701–6.10.1016/0001-6160(67)90350-1 ↗
77. R. den Buurman and A.P. Snoep: Acta Metall., 1972, vol. 20, pp. 407–13.10.1016/0001-6160(72)90035-1 ↗
78. J.E. Doherty and D.F. Gibbons: Acta Metall., 1971, vol. 19, pp. 275–82.10.1016/0001-6160(71)90093-9 ↗
79. L. Parrini and R. Schaller: Acta Mater., 1996, vol. 44, pp. 4881–8.10.1016/S1359-6454(96)00091-2 ↗
80. R.. R. Hasiguti, N. Igata, and G. Kamoshita: Acta Metall., 1962, vol. 10, pp. 442–7.10.1016/0001-6160(62)90023-8 ↗
81. C.A. Schuh: Nanoindentation Studies of Materials, vol. 9, 2006, 32-40.
82. R. Foschia, M. Jobin, and S. Hengsberger: Micron, 2009, vol. 40, pp. 51–5.10.1016/j.micron.2008.03.013 ↗
83. P.P. Pal-val, M. Hamersky, Z. Trojanova, and P. Lukac: Phys. Status Solidi, 1991, vol. 13, pp. 13–6.10.1002/pssa.2211250141 ↗
84. S. Feng, L. Qi, F. Zhao, S. Pan, G. Li, M. Ma, and R. Liu: J. Mater., 2015, vol. 80, pp. 36–40.10.1016/j.matdes.2015.05.015 ↗
85. Y. Kogure, T. Kosugi, T. Nozaki, and M. Doyama: Mater. Sci. Eng. A, 2009, 521, pp. 30–33.10.1016/j.msea.2008.12.057 ↗