journal article·2019-08-15

Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel

M. H. Razmpoosh, E. Biro, F. Goodwin, Y. Zhou

Publisher page

Abstract

During a crash situation, tailor-welded blanks (TWBs) are subjected to local high strain rate (HSR) deformations. Hence, understanding the effects of fiber laser welding on the microstructure and subsequent dynamic (1 to 100 s−1) tensile properties of the recently developed medium-Mn transformation-induced plasticity (TRIP) steel is essential. Electron backscatter diffraction (EBSD) analysis indicated that Mn segregation during rapid solidification of the FZ resulted in retention of austenite within interdendritic regions. Moreover, it was found that the lower stability of retained austenite within the intercritical heat-affected zone (HAZ) resulted in double yielding behavior of the welds due to discontinuous yielding (Luders banding). However, by increasing the strain rate, the second yield point decreased and shifted to higher strains. In the dynamic loading range, the ultimate tensile strength (UTS) and elongation of welds showed positive strain rate sensitivity (SRS). In addition, high-speed thermal camera results indicated that the average temperature decreased with increasing strain rate as a consequence of the balance between TRIP effect suppression and HSR adiabatic heating. The overall increase in elongation of the welds at higher strain rates was attributed to the higher localized softening during pre-failure nonuniform deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. R. Ashiri, S.P.H. Marashi, and Y.D. Park: Weld. Res., 2018, 50, 157–69.
2. R. Ashiri, H. Mostaan, and Y. Park: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 6161–72.10.1007/s11661-018-4900-0 ↗
3. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
4. J.J. Guzman-aguilera, C.J. Martinez-gonzalez, V.H. Baltazar-hernandez, and S. Basak: Mater. Sci. Eng. A, 2018, vol. 718, pp. 216–27.10.1016/j.msea.2018.01.108 ↗
5. I. Hajiannia, M. Shamanian, M. Atapour, and R. Ashiri: SAE Int. J. Mater. Manuf., 2018, 12, 5-1210.4271/05-12-01-0001 ↗
6. I. Hajiannia, M. Shamanian, M. Atapour, E. Ghassemali, R. Ashiri, and F. Lambiase: Cog. Eng., 2018, vol. 5, pp. 1–13.
7. L. Samek, E. De Moor, J. Penning, and B.C. De Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–24.10.1007/s11661-006-0157-0 ↗
8. E.M. Bellhouse and J.R. Mcdermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
9. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Philos. Mag., 2009, vol. 81, pp. 1789–1812.10.1080/01418610108216637 ↗
10. J.E. Jin and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 1680–88.10.1016/j.actamat.2011.12.004 ↗
11. S. Kang, Y. Jung, J. Jun, and Y. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 745–51.10.1016/j.msea.2009.08.048 ↗
12. M.H. Razmpoosh, M. Shamanian, and M. Esmailzadeh: Mater. Des., 2015, vol. 67, pp. 571–76.10.1016/j.matdes.2014.10.090 ↗
13. S. Martin, S. Wolf, U. Martin, and L. Kru: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 49–58.10.1007/s11661-014-2684-4 ↗
14. M.H. Razmpoosh, A. Zarei-hanzaki, N. Haghdadi, J. Cho, W. Jae, and S. Heshmati-manesh: Mater. Sci. Eng. A, 2015, vol. 638, pp. 5–14.10.1016/j.msea.2015.03.066 ↗
15. L. Mujica Roncery, S. Weber, and W. Theisen: Scripta Mater., 2012, vol. 66, pp. 997–1001.10.1016/j.scriptamat.2011.11.041 ↗
16. R. Ashiri, M. Shamanian, H.R. Salimijazi, M.A. Haque, J.H. Bae, C.W. Ji, K.G. Chin, and Y. Do Park: Scripta Mater., 2016, vol. 114, pp. 41–47.10.1016/j.scriptamat.2015.11.027 ↗
17. R. Ashiri, M.A. Haque, C.W. Ji, M. Shamanian, H.R. Salimijazi, and Y. Do Park: Scripta Mater., 2015, vol. 109, pp. 6–10.10.1016/j.scriptamat.2015.07.006 ↗
18. C. Beal, X. Kleber, and M. Bouzekri: Scripta Mater., 2012, vol. 66, pp. 1030–33.10.1016/j.scriptamat.2011.12.040 ↗
19. A. Perlade, A. Antoni, R. Besson, D. Caillard, J. Emo, A. Gourgues, P. Maugis, L. Thuinet, Q. Tonizzo, J. Schmitt, A. Perlade, A. Antoni, R. Besson, D. Caillard, J. Emo, A. Gourgues, P. Maugis, and A. Mestrallet: Mater. Sci. Technol. 2019, 35, 219-4010.1080/02670836.2018.1549303 ↗
20. D. Suh and S. Kim: Scripta Mater., 2017, vol. 126, pp. 63–67.10.1016/j.scriptamat.2016.07.013 ↗
21. Z.C. Li, H. Ding, R.D.K. Misra, and Z.H. Cai: Mater. Sci. Eng. A, 2017, vol. 682, pp. 211–19.10.1016/j.msea.2016.11.048 ↗
22. L. Luo, W. Li, L. Wang, S. Zhou, and X. Jin: Mater. Sci. Eng. A, 2017, vol. 682, pp. 698–703.10.1016/j.msea.2016.11.017 ↗
23. Y. Lee, J. Han, Y. Lee, and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843–56.10.1179/1743284714Y.0000000722 ↗
24. Y. Chang, M. Wang, N. Wang, X. Li, C. Wang, and G. Zheng: Mater. Sci. Eng. A, 2018, vol. 721, pp. 179–88.10.1016/j.msea.2018.02.084 ↗
25. B. Sun, F. Fazeli, C. Scott, B. Guo, C. Aranas, X. Chu, M. Jahazi, and S. Yue: Mater. Sci. Eng. A, 2018, vol. 729, pp. 496–507.10.1016/j.msea.2018.04.115 ↗
26. S. Lee and B.C.D.E. Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5018–24.10.1007/s11661-013-1860-2 ↗
27. B.B. He, H.W. Luo, and M.X. Huang: Int. J. Plast., 2016, vol. 78, pp. 173–86.10.1016/j.ijplas.2015.11.004 ↗
28. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229–36.10.1016/j.actamat.2014.10.052 ↗
29. Z.H. Cai, H. Ding, X. Xue, and Q.B. Xin: Mater. Sci. Eng. A, 2013, vol. 560, pp. 388–95.10.1016/j.msea.2012.09.083 ↗
30. C. Lee, J. Jeong, J. Han, S. Lee, S. Lee, and Y. Lee: Acta Mater., 2015, vol. 84, pp. 1–8.10.1016/j.actamat.2014.10.032 ↗
31. C.-H. Kim, J.-K. Choi, M.-J. Kang, and Y.-D. Park: J. Achiev. Mater. Manuf. Eng., 2010, vol. 39 (1), pp. 79–86.
32. M. Xia and Y. Zhou: J. Eng. Mater. Technol., 2018, vol. 130, pp. 1–9.
33. M. Xia, E. Biro, Z. Tian, and Y.N. Zhou: ISIJ Int., 2008, vol. 48, pp. 809–14.10.2355/isijinternational.48.809 ↗
34. D. Parkes, D. Westerbaan, S.S. Nayak, Y. Zhou, F. Goodwin, S. Bhole, and D.L. Chen: Mater. Des., 2014, vol. 56, pp. 193–99.10.1016/j.matdes.2013.10.087 ↗
35. W. Xu, D. Westerbaan, S.S. Nayak, D.L. Chen, F. Goodwin, E. Biro, and Y. Zhou: Mater. Sci. Eng. A, 2012, vol. 553, pp. 51–58.10.1016/j.msea.2012.05.091 ↗
36. N. Lun, D.C. Saha, A. Macwan, H. Pan, L. Wang, F. Goodwin, and Y. Zhou: Mater. Des., 2017, vol. 131, pp. 450–59.10.1016/j.matdes.2017.06.037 ↗
37. J. Talonen, P. Nenonen, G. Pape, and H. Hänninen: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 421–32.10.1007/s11661-005-0313-y ↗
38. R. Alturk, C.M. Enloe, F. Abu-farha, and T.W. Brown: JOM, 2018, vol. 70, pp. 894–905.10.1007/s11837-018-2830-3 ↗
39. R. Rana, E.D.E. Moor, J.G. Speer, and D.K. Matlock: JOM, 2018, vol. 70, pp. 706–13.10.1007/s11837-018-2779-2 ↗
40. J.T. Benzing, W.A. Poling, D.T. Pierce, J. Bentley, K.O. Findley, D. Raabe, and J.E. Wittig: Mater. Sci. Eng. A, 2018, vol. 711, pp. 78–92.10.1016/j.msea.2017.11.017 ↗
41. H.K. Yang, Z.J. Zhang, Y.Z. Tian, and Z.F. Zhang: Mater. Sci. Eng. A, 2017, vol. 690, pp. 146–57.10.1016/j.msea.2017.02.014 ↗
42. “Weld Specifications Laser Welds-Butt Joints GM4485M,” General Motors Engineering Standards, General Motors, 2002.
43. M.W.R. Smerd, S. Winkler, and C. Salisbury: Int. J. Impact Eng., 2005, vol. 32, pp. 541–60.10.1016/j.ijimpeng.2005.04.013 ↗
44. A. Bardelcik, M.J. Worswick, S. Winkler, and M.A. Wells: Int. J. Impact Eng., 2012, vol. 50, pp. 49–62.10.1016/j.ijimpeng.2012.06.007 ↗
45. C. Wang, J. Shi, C.Y. Wang, W.J. Hui, and M.Q. Wang: ISIJ Int., 2011, vol. 51, pp. 651–56.10.2355/isijinternational.51.651 ↗
46. R. Zhang, W.Q. Cao, Z.J. Peng, J. Shi, H. Dong, and C.X. Huang: Mater. Sci. Eng. A, 2013, vol. 583, pp. 84–88.10.1016/j.msea.2013.06.067 ↗
47. X. Li, R. Song, N. Zhou, and J. Li: Scripta Mater., 2018, vol. 154, pp. 30–33.10.1016/j.scriptamat.2018.05.016 ↗
48. Y. Yang, Z. Mi, M. Xu, Q. Xiu, J. Li, and H. Jiang: Mater. Sci. Eng. A, 2018, vol. 725, pp. 389–97.10.1016/j.msea.2018.04.041 ↗
49. D.C. Saha, E. Biro, A.P. Gerlich, and Y. Zhou: Mater. Sci. Eng. A, 2016, vol. 673, pp. 467–75.10.1016/j.msea.2016.07.092 ↗
50. B.S. Seong, E.J. Shin, Y.S. Han, C.H. Lee, Y.J. Kim, and S.J. Kim: Physica B 2004, 350, 467–69.10.1016/j.physb.2004.03.122 ↗
51. L. Fu, Z. Li, H. Wang, and A. Shan: Scripta Mater., 2012, vol. 67, pp. 297–300.10.1016/j.scriptamat.2012.05.010 ↗
52. M. Xia, Z. Tian, L. Zhao, and Y.N. Zhou: ISIJ Int., 2008, vol. 48, pp. 483–88.10.2355/isijinternational.48.483 ↗
53. W. Guo, Z. Wan, P. Peng, Q. Jia, G. Zou, and Y. Peng: J. Mater. Process. Technol., 2018, vol. 256, pp. 229–38.10.1016/j.jmatprotec.2018.02.015 ↗
54. Z. He, Y. He, Y. Ling, Q. Wu, Y. Gao, and L. Li: J. Mater. Process. Technol., 2012, vol. 212, pp. 2141–47.10.1016/j.jmatprotec.2012.05.020 ↗