journal article·2019-08-15

Lift-Off of Surface Oxides During Galvanizing of a Dual-Phase Steel in a Galvannealing Bath

K. F. Chen, I. Aslam, B. Li, R. L. Martens, J. R. Goodwin, F. E. Goodwin, M. F. Horstemeyer

Publisher page

Abstract

Focused ion beam (FIB) and transmission electron microscopy (TEM) were used to characterize the interfacial structure of a dual-phase steel after galvanizing in a galvannealing bath with a dissolved aluminum concentration of 0.125 wt pct. Improved specimen preparation overcame preferential milling difficulties so that the interface region of the zinc-coated steel specimen was well preserved. The results show that the surface MnO oxide, a product of heat treating prior to galvanizing, was lifted off the surface of the substrate and subsequently entrapped in the Zn-Fe phase during galvanizing. A discontinuous inhibition layer was formed directly on top of the substrate. In regions where the inhibition layer was absent, Zn-Fe crystals grew directly on top of the substrate. This behavior significantly differs from the parallel study in which a DP steel was galvanized in a Zn bath with a higher Al concentration, where no lift-off of the MnO oxide was observed and the inhibition layer grew directly on top of the MnO oxide film. Possible mechanisms that are responsible for these significant differences were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. R. Kuziak, R. Kawalla, and S. Waengler: Arch. Civ. Mech. Eng., 2008, vol. 8, pp. 103–117.10.1016/S1644-9665(12)60197-6 ↗
2. A. Mayyas, A. Qattawi, M. Omar, and D. Shan: Renew. Sustain. Energy Rev., 2012, vol. 16, pp. 1845–1862.10.1016/j.rser.2012.01.012 ↗
3. O. Kwon, K.Y. Lee, G.S. Kim, and K.G. Chin: in Materials Science Forum, vol. 638, Trans Tech Publ, 2010, pp. 136–41.10.4028/www.scientific.net/MSF.638-642.136 ↗
4. A. Grajcar, R. Kuziak, and W. Zalecki: Arch. Civ. Mech. Eng., 2012, vol. 12, pp. 334–341.10.1016/j.acme.2012.06.011 ↗
5. H. Liu, F. Li, W. Shi, S. Swaminathan, Y. He, M. Rohwerder, and L. Li: Surf. Coat. Technol., 2012, vol. 206, pp. 3428–3436.10.1016/j.surfcoat.2012.02.001 ↗
6. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
7. L. Cho, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4484–4498.10.1007/s11661-014-2394-y ↗
8. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Surf. Interface Anal. Int. J. Devoted Dev. Appl. Tech. Anal. Surf. Interfaces Thin Films, 2003, vol. 35, pp. 1004–14.10.1002/sia.1639 ↗
9. Y. Kim, J. Lee, K.-S. Shin, S.-H. Jeon, and K.-G. Chin: Mater. Charact., 2014, vol. 89, pp. 138–145.10.1016/j.matchar.2014.01.012 ↗
10. L. Cho, S.J. Lee, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 362–371.10.1007/s11661-012-1392-1 ↗
11. S. Alibeigi and J.R. McDermid: in Proceedings of the Galvatech, vol. 13, 2013, pp. 24–26.
12. N.L. Okamoto, J. Okumura, M. Higashi, and H. Inui: Acta Mater., 2017, vol. 129, pp. 290–299.10.1016/j.actamat.2017.02.060 ↗
13. M.S. Kim, J.H. Kwak, J.S. Kim, Y.H. Liu, N. Gao, and N.-Y. Tang: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1903–10.10.1007/s11661-009-9880-7 ↗
14. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
15. R. Kavitha and J.R. McDermid: Surf. Coat. Technol., 2012, vol. 212, pp. 152–158.10.1016/j.surfcoat.2012.09.038 ↗
16. M. Blumenau, M. Norden, F. Friedel, and K. Peters: Surf. Coat. Technol., 2011, vol. 205, pp. 3319–27.10.1016/j.surfcoat.2010.11.053 ↗
17. G.M. Song, T. Vystavel, N. van der Pers, J.T.M. De Hosson, and W.G. Sloof: Acta Mater., 2012, vol. 60, pp. 2973–81.10.1016/j.actamat.2012.02.003 ↗
18. R. Sagl, A. Jarosik, D. Stifter, and G. Angeli: Corros. Sci., 2013, vol. 70, pp. 268–275.10.1016/j.corsci.2013.01.039 ↗
19. I. Aslam, B. Li, R.L. Martens, J.R. Goodwin, H.J. Rhee, and F. Goodwin: Mater. Charact., 2016, vol. 120, pp. 63–8.10.1016/j.matchar.2016.08.014 ↗
20. M. Blumenau, M. Norden, F. Friedel, and K. Peters: Surf. Coat. Technol., 2010, vol. 205, pp. 828–34.10.1016/j.surfcoat.2010.07.123 ↗
21. K.-K. Wang, C.-W. Hsu, L. Chang, D. Gan, and K.-C. Yang: Appl. Surf. Sci., 2013, vol. 285, pp. 458–68.10.1016/j.apsusc.2013.08.077 ↗
22. E.M. Bellhouse, A.I.M. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 147–156.10.1016/j.msea.2006.09.117 ↗
23. G.S. Mousavi and J.R. McDermid: Surf. Coat. Technol.
24. L. Cho, M.S. Kim, Y.H. Kim, and B.C.D. Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5081–95.10.1007/s11661-013-1867-8 ↗
25. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, and S. Yamaguchi: ISIJ Int., 2009, vol. 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
26. R. Sagl, A. Jarosik, G. Angeli, T. Haunschmied, G. Hesser, and D. Stifter: Acta Mater., 2014, vol. 72, pp. 192–9.10.1016/j.actamat.2014.03.037 ↗
27. N. Gao, D.Y.H. Liu, N.-Y. Tang, R. Park, and M.-S. Kim: Genova, Italy, Associazione Italiana di Metallurgia, Milan, 2011, pp. 123–30.
28. K.-C. Lin, P.-W. Chu, C.-S. Lin, and H.-B. Chen: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2690–2698.10.1007/s11661-013-1612-3 ↗
29. M. Blumenau, M. Norden, F. Friedel, and K. Peters: Surf. Coat. Technol., 2011, vol. 206, pp. 559–67.10.1016/j.surfcoat.2011.07.088 ↗
30. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2753–2768.10.1007/s11661-011-0685-0 ↗
31. S. Frenznick, S. Swaminathan, M. Stratmann, and M. Rohwerder: J. Mater. Sci., 2010, vol. 45, pp. 2106–2111.10.1007/s10853-009-4147-7 ↗
32. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne, and S. Claessens: Rev. Métallurgie–International J. Metall., 2004, vol. 101, pp. 831–837.10.1051/metal:2004154 ↗
33. E. Baril and G. L’Espérance: Metall. Mater. Trans. A, 1999, vol. 30, pp. 681–695.10.1007/s11661-999-1000-1 ↗
34. L. Chen, R. Fourmentin, and J.R. McDermid: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2128–2142.10.1007/s11661-008-9552-z ↗
35. E.T. McDevitt, Y. Morimoto, and M. Meshii: in 4 Conference on Zinc and Zinc Alloy Coated Steel Sheet, 1998.
36. D. Paik, M. Hong, and Y. Jin: in Galvatech, vol. 4, 2004, pp. 481–90.
37. S. Dionne: JOM, 2006, vol. 58, pp. 32–40.10.1007/s11837-006-0157-y ↗
38. Y. Morimoto, E. Mcdevitt, and M. Meshii: ISIJ Int., 1997, vol. 37, pp. 906–13.10.2355/isijinternational.37.906 ↗
39. I. Hertveldt, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1225–1232.10.1007/s11661-000-0118-y ↗
40. D.Y.H. Liu and N.-Y. Tang: Galvatech '04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL. AIST, Warrendale, PA, 2004, pp. 1155–64.
41. Y. Li, S. Jiang, X. Yuan, B. Chen, and Q. Zhang: Surf. Interface Anal., 2012, vol. 44, pp. 472–7.10.1002/sia.3829 ↗
42. Y.F. Gong, H.S. Kim, and B.C.D. Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗