journal article·2018-11

The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys

Md. Shahnewaz Bhuiyan, Hiroyuki Toda, Kazuyuki Shimizu, Hang Su, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Watanabe

Publisher page

Abstract

High-resolution synchrotron X-ray microtomography has been successfully used to evaluate the local crack driving force at arbitrary crack tip locations as a form of CTOD. This is to our knowledge the first experimental evidence in supporting a correlation between the local fracture toughness associated with the corresponding hydrogen-assisted fracture mode including quasi-cleavage, intergranular, and dimple. Our results have revealed that very small CTOD, of about 1.26 μm, is observed when the crack tip is located in the quasi-cleavage fracture. Compared to quasi-cleavage fracture, the CTOD values increase by a factor of 5 when the crack tip is located in intergranular fracture mode and even greater increase in CTOD (of about 18 times) is observed when the crack tip is located in dimple fracture mode. We also observed that the crack propagation process under the influence of hydrogen deviates greatly from that of standard behavior, where stable crack growth is accompanied by a change in crack tip singularity from the HRR to the RDS. It was concluded that the presence of high concentration of hydrogen ahead of the crack tip increases the slip localization, and thereby reduces crack tip blunting. Hence crack continues to grow before the crack tip becomes fully blunt.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. R. Wang: Corros. Sci., 2009, vol. 51, pp. 2803–10.10.1016/j.corsci.2009.07.013 ↗
2. J Sojka, V. Vodarek, I Schindler, A. Wenglorzová: Corros. Sci., 2011, vol. 53(8), pp. 2575–2581.10.1016/j.corsci.2011.04.015 ↗
3. C.S. Marchi, T. Michler, K.A. Nibur, B.P. Somerday: Int. J. Hydrogen Energy., 2010, vol. 35, pp. 9736–9745.10.1016/j.ijhydene.2010.06.018 ↗
4. D.F. Teter, I.M. Robertson, H.K. Birnbaum: Acta. Mater., 2001, vol. 49, pp. 4313–4323.10.1016/S1359-6454(01)00301-9 ↗
5. Q. Liu, M. Zhang, Q. Zhou, A. Atrens: Corros. Sci., 2015, vol. 99, pp. 98–117.10.1016/j.corsci.2015.06.036 ↗
6. M. Hatano, M. Fujinami, K. Arai, H. Fujii, M. Nagumo: Acta Mater., 2014, vol. 67, pp. 342–353.10.1016/j.actamat.2013.12.039 ↗
7. G. Wang, Y. Yan, J. Li, J. Huang, L. Qiao, A.A. Volinsky: Mater. Sci. Eng. A., 2013, vol. 586, pp. 142–148.10.1016/j.msea.2013.07.097 ↗
8. P. Sofronis, H.K. Birnbaum: J. Mech. Phys. Solids., 1995, vol. 43, pp. 49–90.10.1016/0022-5096(94)00056-B ↗
9. D. Delafosse, J.-P. Chateau, A. Chambreuil, T. Magnin: Mater. Sci. Eng. A., 1997, vol. 234–236, pp. 889–892.10.1016/S0921-5093(97)00414-0 ↗
10. A.H.M. Krom, R.W.J. Koers, A. Bakker: J. Mech. Phys. Solids., 1999, vol. 47, pp. 971–992.10.1016/S0022-5096(98)00064-7 ↗
11. J. Lufrano, P. Sofronis, D. Symons: Eng. Fract. Mech., 1998, vol. 59, pp.827–845.10.1016/S0013-7944(97)00142-2 ↗
12. S. Wang, M.L. Martin, P. Sofronis, S. Ohnuki, N. Hashimoto, I.M. Robertson: Acta Mater., 2014, vol. 69, pp. 275–282.10.1016/j.actamat.2014.01.060 ↗
13. M. Wang, E Akiyama, K Tsuzaki: Corros. Sci., 2007, vol. 49 (11), pp. 4081–4097.10.1016/j.corsci.2007.03.038 ↗
14. Q. Liu, B. Irwanto, A. Atrens:Mater. Sci. Eng. A, 2014, vol. 617, pp. 200-210.10.1016/j.msea.2014.08.056 ↗
15. R.P. Gangloff and B.P. Somerday (eds.): Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, Woodhead Publishing, Cambridge, 2012.10.1533/9780857095374 ↗
16. J. Albrecht, A.W. Thompson, I.M. Bernstein: Metall. Trans. A, 1979, vol. 10A, pp. 1759-1766.10.1007/BF02811712 ↗
17. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp.861-890.10.1007/BF02654700 ↗
18. D. Nguyen, A.W. Thompson, I.M. Bernstein: Acta Metall., 1987, vol. 35, pp. 2417–2425.10.1016/0001-6160(87)90139-8 ↗
19. R.J. Gest, A.R. Troiano: Corrosion., 1974, vol. 30, pp. 274–279.10.5006/0010-9312-30.8.274 ↗
20. J.R. Pickens, J.R. Gordon, J.A.S. Green: Metall. Mater. Trans. A., 1983, vol. 14, pp. 925–930.10.1007/BF02644298 ↗
21. D.C. Ahn, P. Sofronis, R.H. Dodds Jr: Int. J. Hydrog. Energy, 2007, vol. 32, pp. 3734–3742.10.1016/j.ijhydene.2006.08.047 ↗
22. R.A. Oriani, P.H. Josephic: Acta Mater., 1977, vol. 25, pp. 979–988.10.1016/0001-6160(77)90126-2 ↗
23. H.K. Birnbaum, P. Sofronis: Mater. Sci. Eng. A., 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
24. H. Toda, S. Yamamoto, M. Kobayashi, K. Uesugi, H. Zhang: Acta Mater., 2008, vol. 56, pp. 6027–6039.10.1016/j.actamat.2008.08.022 ↗
25. S. Bhuiyan, Y. Tada, H. Toda, S. Hang, K. Uesugi, A. Takeuchi, N. Sakaguchi: Int. J. Fract., 2016, vol. 200 (1-2), pp. 13–29.10.1007/s10704-016-0092-z ↗
26. M. Kobayashi, H. Toda, Y. Kawai, T. Ohgaki, K. Uesugi: Acta Mater., 2008, vol. 56, pp. 2167–2181.10.1016/j.actamat.2007.12.058 ↗
27. H. Toda, E. Maire, Y. Aoki, M. Kobayashi: J. Strain Analysis, 2011, vol. 46, pp. 549-561.10.1177/0309324711408975 ↗
28. R.O. Ritchie, A.W. Thompson: Metall. Mater. Trans. A., 1985, vol. 16, pp. 233–248.10.1007/BF02816050 ↗
29. H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu, M. Kobayashi: Acta Mater., 2011, vol. 59, pp. 1995–2008.10.1016/j.actamat.2010.11.065 ↗
30. J.R. Rice, W.J. Drugan and T.L. Sham: ASTM STP 700, American Society for Testing and Materials, Philadelphia, PA, 1980, pp. 189–221.10.1520/STP36972S ↗
31. W.J. Drugan, J.R. Rice, T.L. Sham, J. Mech. Phys. Solids, 1982, vol. 30 (6), pp. 447-473.10.1016/0022-5096(82)90027-8 ↗
32. K.S. Chan: Metall. Mater. Trans. A, 1990, vol. 21, pp. 81-86.10.1007/BF02656426 ↗
33. Y.H. Chiao, D.R. Clarke: Acta Metall., 1989, 37, pp. 203–219.10.1016/0001-6160(89)90279-4 ↗
34. G.J. Dienes, A. Paskin: J. Phys. Chem. Solids, 1987, vol. 48, pp. 1015–1033.10.1016/0022-3697(87)90117-X ↗
35. A. Paskin, B. Massoumzadeh, K. Shukla, K. Sieradzki: Acta Metall., 1985, vol. 33, pp. 1987–1996.10.1016/0001-6160(85)90121-X ↗
36. T. Zhu, W. Yang, T. Guo: Acta Mater., 1996, vol. 44, pp. 3049–3058.10.1016/1359-6454(95)00436-X ↗
37. P. Sofronis, R.M. McMeeking: J. Mech. Phys. Solids., 1989, vol. 37, pp. 317–350.10.1016/0022-5096(89)90002-1 ↗
38. J. Lufrano, P. Sofronis, H.K. Birnbaum: J. Mech. Phys. Solids., 1996, vol. 44, pp. 179–205.10.1016/0022-5096(95)00075-5 ↗
39. P. Sofronis, J. Lufrano: Mater. Sci. Eng. A., 1999, vol. 260, pp. 41–47.10.1016/S0921-5093(98)00982-4 ↗
40. P. Sofronis: J. Mech. Phys. Solids., 1995, vol. 43, pp. 1385–1407.10.1016/0022-5096(95)00037-J ↗
41. R. Matsumoto, S. Taketomi, S. Matsumoto, N. Miyazaki: Int. J. Hydrogen Energy., 2009, vol. 34, pp. 9576–9584.10.1016/j.ijhydene.2009.09.052 ↗
42. P.J. Ferreira, I.M. Robertson, H.K. Birnbaum: Acta Mater., 1999, vol. 47, pp. 2991–2998.10.1016/S1359-6454(99)00156-1 ↗
43. D.P. Abraham, C.J. Altstetter: Matall. Mater. Trans. A, 1995, vol. 26, pp. 2859-2871.10.1007/BF02669644 ↗
44. S. Jani, M. Marek, R.F. Hochman, E.I. Meletis, Metall. Trans. A., 1991, vol. 22, pp. 1453-1461.10.1007/BF02660677 ↗
45. S.P. Lynch: Acta. Metall., 1988, vol. 36, pp. 2639–2661.10.1016/0001-6160(88)90113-7 ↗
46. S.P. Lynch: Acta Metall., 1984, vol. 32, pp. 79–90.10.1016/0001-6160(84)90204-9 ↗
47. M. Dadfarnia, M.L. Martin, A. Nagao, P. Sofronis, I.M. Robertson: J. Mech. Phys. Solids., 2015, vol. 78, pp. 511–525.10.1016/j.jmps.2015.03.002 ↗
48. J.K. Tien, R.J. Richards, O. Buck, H.L. Marcus: Scr. Met., 1975, vol. 9, pp. 1097–1101.10.1016/0036-9748(75)90287-2 ↗
49. J. Tien, A.W. Thompson, I.M. Bernstein: Mater. Trans. A., 1976, vol. 7, pp. 1–9.
50. M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–1606.10.1016/j.actamat.2010.11.024 ↗
51. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, I.M. Robertson: Procedia Mater. Sci., 2014, vol. 3, pp. 1700–1705.10.1016/j.mspro.2014.06.274 ↗
52. A. Nagao, M.L. Martin, M. Dadfarnia, P. Sofronis, I.M. Robertson: Acta Mater., 2014, vol. 74, pp. 244–254.10.1016/j.actamat.2014.04.051 ↗
53. T. Neeraj, R. Srinivasan, J. Li, Acta. Mater., 2011, vol. 60, pp. 5160–5171.10.1016/j.actamat.2012.06.014 ↗
54. S. Li, Y. Li, Y.C. Lo, T. Neeraj, R. Srinivasan, X. Ding: Int. J. Plast., 2015, vol. 74, pp. 175–191.10.1016/j.ijplas.2015.05.017 ↗
55. P. Novak, R. Yuan, B.P. Somerday, P. Sofronis, R.O. Ritchie: J. Mech. Phys. Solids., 2010, vol. 58, pp. 206–226.10.1016/j.jmps.2009.10.005 ↗
56. T. Izumi, G. Itoh: Mater. Trans:Jpn. Inst. Met., 2011, vol. 52, pp. 130–134.
57. E.K. Gang Lu: Phys. Rev. Lett., 2005, vol. 94, pp. 155501.10.1103/PhysRevLett.94.155501 ↗
58. G. Lu, Q. Zhang, N. Kioussis, E. Kaxiras: Phys. Rev. Lett., 2001, vol. 87, pp. 098801–098804.
59. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, K.E. Nygren: Mater. Trans., 2015, vol. 46, pp. 2323–2341.10.1007/s11661-015-2836-1 ↗