Atomistic Simulations of Compression Tests on γ-Precipitate Containing Ni3Al Nanocubes
Source abstract
Abstract
The influence of $$\gamma $$ precipitates on the deformation behavior of $$\gamma '$$ Ni $$3$$ Al nanocubes with {100} side surfaces is investigated by molecular dynamics simulations of uniaxial compression tests at 300 K. The plastic deformation of the nanocubes is caused by the nucleation of Shockley partial dislocations near the cube corners followed by the formation of pseudo-twins. While the dominant deformation mechanisms and the flow stress are not affected by the presence of $$\gamma $$ precipitates, the precipitates reduce the yield stress by up to 10 pct and determine the location of dislocation nucleation. These findings can be rationalized by accounting for the misfit stresses caused by the presence of the $$\gamma $$ precipitates. Within the simulated ranges, the results are independent of cube size, rounding of the cube or precipitate corners, surface roughness, and strain rate. The observed precipitate softening in the dislocation-nucleation-controlled deformation of $$\gamma '$$ Ni $$3$$ Al nanocubes is in stark contrast to the strengthening effect caused by the presence of a $$\gamma $$ phase in the $$\gamma '$$ precipitates in the microstructure of typical Ni- and Co-based superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. R. C. Reed, The Superalloys, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. T. M. Pollock and S. Tin, J. Propul. Power, 2006, vol. 22, 2, pp. 361–374.10.2514/1.18239 ↗
3. A. Prakash, J. Guenole, J. Wang, J. Muller, E. Spiecker, M. J. Mills, I. Povstugar, P. Choi, D. Raabe and E. Bitzek, Acta Mater., 2015, vol. 92, pp. 33–45.10.1016/j.actamat.2015.03.050 ↗
4. R. K. Ham, R. H. Cook and G. R. Purdy, Met. Sci. J., 1972, vol. 6, 1, pp. 73–77.10.1179/030634572790446064 ↗
5. J. Radavich and W. Couts, Trans. ASM, 1961, vol. 54, pp. 591–597.
6. R. K. Ham, R. H. Cook, G. R. Purdy and G. Willoughby, Met. Sci. J., 1972, vol. 6, 1, pp. 205–210.10.1179/030634572790446118 ↗
7. H. F. Merrick, Metall. Trans., 1973, vol. 4, 3, pp. 885–887.10.1007/BF02643103 ↗
8. L. R. Cornwell and G. R. Purdy, Metall. Trans., 1974, vol. 5, 3, pp. 780–781.10.1007/BF02644679 ↗
9. F. Vogel, N. Wanderka, Z. Balogh, M. Ibrahim, P. Stender, G. Schmitz and J. Banhart, Nat. Commun., 2013, vol. 4, pp. 1–7.
10. V. Yardley, I. Povstugar, P. P. Choi, D. Raabe, A. B. Parsa, A. Kostka, C. Somsen, A. Dlouhy, K. Neuking, E. P. George and G. Eggeler, Advanced Engineering Materials, 2016, vol. 18, 9, pp. 1556–1567.10.1002/adem.201600237 ↗
11. W. Tian, T. Sano and M. Nemoto, Scr. Metall., 1986, vol. 20, 6, pp. 933–936.10.1016/0036-9748(86)90469-2 ↗
12. Y. Ma and A. J. Ardell, Acta Mater., 2007, vol. 55, 13, pp. 4419–4427.10.1016/j.actamat.2007.04.008 ↗
13. T. Pretorius, D. Baither and E. Nembach, Acta Mater., 2001, vol. 49, 11, pp. 1981–1985.10.1016/S1359-6454(01)00096-9 ↗
14. A. Takahashi, M. Kawanabe and M. Kikuchi, Adv. Mater. Res., 2008, vol. 33-37, pp. 815–820.10.4028/www.scientific.net/AMR.33-37.815 ↗
15. A. Takahashi, M. Kawanabe, N. Kikai, G. Ronbunshu, A. Hen, Trans. Jpn. Soc. Mech. Eng. A, 2009, vol. 75(753), pp. 595–603.10.1299/kikaia.75.595 ↗
16. A. Takahashi, M. Kawanabe and N. M. Ghoniem, Philos. Mag., 2010, vol. 90, 27-28, pp. 3767–3786.10.1080/14786435.2010.497470 ↗
17. A. Takahashi and Y. Terada, Key Eng. Mater., 2011, vol. 462-463, pp. 425–430.10.4028/www.scientific.net/KEM.462-463.425 ↗
18. D. Mukherji, R. Müller, R. Gilles, P. Strunz, J. Rösler and G. Kostorz, Nanotechnology, 2004, vol. 15, 5, pp. 648–657.10.1088/0957-4484/15/5/042 ↗
19. J. Schloesser, J. Rösler and D. Mukherji, Int. J. Mater. Res., 2011, vol. 102, 5, pp. 532–537.10.3139/146.110504 ↗
20. R. Maaß, L. Meza, B. Gan, S. Tin and J. Greer, Small, 2012, vol. 8, 12, pp. 1869–1875.10.1002/smll.201102603 ↗
21. A. Landefeld, W. M. Mook, J. Rösler and J. Michler, ISRN Nanomater., 2012, vol. 2012, pp. 1–4.10.5402/2012/890486 ↗
22. J. Amodeo, C. Begau and E. Bitzek, Mater. Res. Lett., 2014, vol. 2, 3, pp. 140–145.10.1080/21663831.2013.878884 ↗
23. K. Shreiber and D. Mordehai, Model. Numer. Simul. Mater. Sci., 2015, vol. 23, 8, p. 085004.10.1088/0965-0393/23/8/085004 ↗
24. J. Amodeo and K. Lizoul, Mater. Des., 2017, vol. 135, pp. 223–231.10.1016/j.matdes.2017.09.009 ↗
25. K.K. Sankaran and R.S. Mishra: Metallurgy and Design of Alloys with Hierarchical Microstructures. Elsevier, Amsterdam (2017).
26. IMD: The ITAP Molecular Dynamics Program. http://imd.itap.physik.uni-stuttgart.de, 1996. Accessed 22 Jan 2018.
27. E. Bitzek, P. Koskinen, F. Gähler, M. Moseler and P. Gumbsch, Phys. Rev. Lett., 2006, vol. 97, 17, p. 170201.10.1103/PhysRevLett.97.170201 ↗
28. A. Sedlmayr, E. Bitzek, D. S. Gianola, G. Richter, R. Mö Nig and O. Kraft, Acta Mater., 2012, vol. 60, pp. 3985–3993.10.1016/j.actamat.2012.03.018 ↗
29. A. Prakash, M. Hummel, S. Schmauder and E. Bitzek, MethodsX, 2015, vol. 3, pp. 219–230.10.1016/j.mex.2016.03.002 ↗
30. K. J. Van Vliet, J. Li, T. Zhu, S. Yip and S. Suresh, Phys. Rev. B, 2003, vol. 67, 10, p. 104105.10.1103/PhysRevB.67.104105 ↗
31. W.G. Hoover, Phys. Rev. A, 1985, vol. 31, 3, pp. 1695–1697.10.1103/PhysRevA.31.1695 ↗
32. J. P. Du, C. Y. Wang and T. Yu, Model. Numer. Simul. Mater. Sci., 2013, vol. 21, 1, p. 015007.10.1088/0965-0393/21/1/015007 ↗
33. D. Faken and H. Jónsson, Comput. Mater. Sci., 1994, vol. 2, 2, pp. 279–286.10.1016/0927-0256(94)90109-0 ↗
34. G. J. Ackland and A. P. Jones, Phys. Rev. B, 2006, vol. 73, 5, p. 054104.10.1103/PhysRevB.73.054104 ↗
35. C. Begau: AtomViewer. http://homepage.ruhr-uni-bochum.de/Christoph.Begau, 2014. Accessed 22 Jan 2018.
36. C. Hartley and Y. Mishin, Acta Mater., 2005, vol. 53, 5, pp. 1313–1321.10.1016/j.actamat.2004.11.027 ↗
37. C. Begau, A. Hartmaier, E. George and G. Pharr, Acta Mater., 2011, vol. 59, 3, pp. 934–942.10.1016/j.actamat.2010.10.016 ↗
38. C. Begau, J. Hua and A. Hartmaier, J. Mech. Phys. Solids, 2012, vol. 60, 4, pp. 711–722.10.1016/j.jmps.2011.12.005 ↗
39. J.P. Hirth and J. Lothe: Theory of Dislocations. Wiley, New York, 1982.
40. M. P. Allen and D. J. Tildesley, Computer Simulation of Liquids, Clarendon Press: Oxford, UK, 1996.
41. A. Prakash and E. Bitzek, Materials, 2017, vol. 10, 1, p. 88.10.3390/ma10010088 ↗
42. A. Stukowski, Model. Numer. Simul. , 2010, vol. 18, 1, p. 015012.10.1088/0965-0393/18/1/015012 ↗
43. J. R. Greer and J. T. M. De Hosson, Prog. Mater. Sci., 2011, vol. 56, 6, pp. 654–724.10.1016/j.pmatsci.2011.01.005 ↗
44. B. Gan, H. Murakami, R. Maaß, L. Meza, J. Greer, T. Ohmura, and S. Tin: Superalloys 2012, Proceedings of 12th International Symposium, Wiley, Hoboken, 2012, pp. 83–91.10.1002/9781118516430.ch9 ↗
45. A. Frøseth, H. Van Swygenhoven and P. Derlet, Acta Mater., 2004, vol. 52, 8, pp. 2259–2268.10.1016/j.actamat.2004.01.017 ↗
46. H. Van Swygenhoven, P. M. Derlet and A. G. Frøseth, Nat. Mater., 2004, vol. 3, 6, pp. 399–403.10.1038/nmat1136 ↗
47. H. Van Swygenhoven, P. Derlet and A. Frøseth, Acta Mater., 2006, vol. 54, 7, pp. 1975–1983.10.1016/j.actamat.2005.12.026 ↗
48. Z. Jin, S. Dunham, H. Gleiter, H. Hahn and P. Gumbsch, Scr. Mater., 2011, vol. 64, 7, pp. 605–608.10.1016/j.scriptamat.2010.11.033 ↗
49. M. Kolbe, Mater. Sci. Eng., A, 2001, vol. 319-321, pp. 383–387.10.1016/S0921-5093(01)00944-3 ↗
50. L. Kovarik, R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang and M. Mills, Prog. Mater. Sci., 2009, vol. 54, 6, pp. 839–873.10.1016/j.pmatsci.2009.03.010 ↗
51. W. Gerberich, E. Tadmor, J. Kysar, J. Zimmerman, A. Minor, I. Szlufarska, J. Amodeo, B. Devincre, E. Hintsala and R. Ballarini, J. Vac. Sci. Technol., 2017, vol. 35, 6.10.1116/1.5003378 ↗
52. L. E. Murr, Interfacial phenomena in metals and alloys, Addison-Wesley, MA, 1975.
53. H. Karnthaler, E. Mühlbacher and C. Rentenberger, Acta Mater., 1996, vol. 44, 2, pp. 547–560.10.1016/1359-6454(95)00191-3 ↗
54. A. J. Ardell and M. Pozuelo, Intermetallics, 2017, vol. 88, pp. 81–90.10.1016/j.intermet.2017.05.010 ↗
55. R. Unocic, N. Zhou, L. Kovarik, C. Shen, Y. Wang and M. Mills, Acta Mater., 2011, vol. 59, 19, pp. 7325–7339.10.1016/j.actamat.2011.07.069 ↗
56. N. Zhou, C. Shen, M.J. Mills, J. Li, Y. Wang: Acta Mater., 2011, vol. 59(9), pp. 3484–3497.10.1016/j.actamat.2011.02.022 ↗