journal article·2018-10

Kinetic Behavior and Microstructure of Pearlite Isothermal Transformation Under High Undercooling

Yu Liang, Pingwei Xu, Song Xiang, Yilong Liang, Hu Xiong, Jing Li

Publisher page

Abstract

The kinetic behavior of highly undercooled austenite and its effects on the microstructural evolution and mechanical properties of high-carbon steel are studied. The undercooling degree is increased through a temporary undercooling treatment at the bainite transformation temperature of 380 °C to 450 °C before the pearlite isothermal transformation at 500 °C to 620 °C. The transformation kinetics reveals an increased nose temperature and a rightward shift of the transformation curve under high undercooling conditions. In addition, the undercooling treatment leads to an increased driving force during pearlite transformation, which is responsible for the refined hierarchical structures of pearlite. As a result, a 20 to 40 pct size reduction is achieved for pearlite colonies and lamellae. Such refinement is in turn attributed to an ~ 26 pct increase in reduction in area. This work provides both a new understanding of high-performance fully pearlitic steels for practical applications and new perspectives for potential technological applications in drawing processes for hypoeutectoid steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. [1] Yahyaoui H, Sidhom H, Braham C and Baczmanski A: Mater. Design, 2014, vol. 55, pp. 888-97.10.1016/j.matdes.2013.10.062 ↗
2. Toribio J: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 227-30.10.1016/j.msea.2004.01.084 ↗
3. [3] Elwazri AM, Wanjara P and Yue S: Mat. Sci. Eng. A, 2005, vol. 404, pp. 91-98.10.1016/j.msea.2005.05.051 ↗
4. [4] Zhou S, Zuo Y, Li Z, Wang X and Yong Q: Mater. Charact., 2016, vol. 119, pp. 110-13.10.1016/j.matchar.2016.07.023 ↗
5. [5] Korda AA, Mutoh Y, Miyashita Y and Sadasue T: Mat. Sci. Eng. A, 2006, vol. 428, pp. 262-69.10.1016/j.msea.2006.05.015 ↗
6. [6] Fernández-Vicente A, Carsí M, Peñalba F, Taleff E and Ruano OA: Mat. Sci. Eng. A, 2002, vol. 335, pp. 175-85.10.1016/S0921-5093(01)01916-5 ↗
7. [7] Fernández-Vicente A, Carsí M, Peñalba F and Ruano OA: Fatigue Fract. Eng. M., 2006, vol. 29, pp. 817-28.10.1111/j.1460-2695.2006.01007.x ↗
8. [8] Nam WJ, Bae CM, Oh SJ and Kwon SJ: Scripta Mater., 2000, vol. 42, pp. 457-63.10.1016/S1359-6462(99)00372-3 ↗
9. [9] Wu KM and Bhadeshia HKDH: Scripta Mater., 2012, vol. 67, pp. 53-56.10.1016/j.scriptamat.2012.03.019 ↗
10. [10] Li J and Liu W: J. Magn. Magn. Mater., 2014, vol. 362, pp. 159-64.10.1016/j.jmmm.2014.03.006 ↗
11. [11] Zhang X, Godfrey A, Huang X, Hansen N and Liu Q: Acta Mater., 2011, vol. 59, pp. 3422-30.10.1016/j.actamat.2011.02.017 ↗
12. [12] Zhang X, Hansen N, Godfrey A and Huang X: Acta Mater., 2016, vol. 114, pp. 176-83.10.1016/j.actamat.2016.04.040 ↗
13. [13] Zhang X, Godfrey A, Hansen N and Huang X: Acta Mater., 2013, vol. 61, pp. 4898-909.10.1016/j.actamat.2013.04.057 ↗
14. [14] Li Y, Raabe D, Herbig M, Choi PP, Goto S, Kostka A, Yarita H, Borchers C and Kirchheim R: Phys. Rev. Lett., 2014, vol. 113, pp. 106104.10.1103/PhysRevLett.113.106104 ↗
15. [15] Yi HL: Mat. Sci. Eng. A, 2010, vol. 527, pp. 7600-04.10.1016/j.msea.2010.08.009 ↗
16. [16] Miyamoto G, Karube Y and Furuhara T: Acta Mater., 2016, vol. 103, pp. 370-81.10.1016/j.actamat.2015.10.032 ↗
17. [17] Wang B, Liu Z, Zhou X, Wang G and Misra RDK: Mat. Sci. Eng. A, 2013, vol. 575, pp. 189-98.10.1016/j.msea.2013.02.071 ↗
18. [18] Wang B, Liu Z, Zhou X, Wang G and Misra RDK: Mat. Sci. Eng. A, 2013, vol. 588, pp. 167-74.10.1016/j.msea.2013.09.012 ↗
19. [19] Bhadeshia HKDH: Materials Science Forum, 1998, vol. 284-286, pp. 39-50.
20. [20] Aranda MM, Kim B, Rementeria R, Capdevila C and Andrés CGD: Metall. Trans. A, 2014, vol. 45, pp. 1778-86.10.1007/s11661-013-1996-0 ↗
21. [21] Zhang Y, He C, Zhao X, Zuo L, Esling C and He J: J. Magn. Magn. Mater., 2004, vol. 284, pp. 287-93.10.1016/j.jmmm.2004.06.048 ↗
22. [22] Frye JJH, Stansbury EE and McElroy DL: Trans. AIME, 1953, vol. 219-224, pp. 3-47.
23. [23] Hutchinson CR, Hackenberg RE and Shiflet GJ: Acta Mater., 2004, vol. 52, pp. 3565-85.10.1016/j.actamat.2004.04.010 ↗
24. [24] Aranda MM, Rementeria R, Poplawsky J, Urones-Garrote E and Capdevila C: Scripta Mater., 2015, vol. 104, pp. 67-70.10.1016/j.scriptamat.2015.04.005 ↗
25. [25] Rahnama A and Qin RS: Mat. Sci. Eng. A, 2015, vol. 627, pp. 145-52.10.1016/j.msea.2014.12.084 ↗
26. [26] Liu S, Zhang F, Yang Z, Wang M and Zheng C: Mater. Design, 2016, vol. 93, pp. 73-80.10.1016/j.matdes.2015.12.134 ↗
27. [27] Lian FL, Liu HJ, Sun JJ, Sun XJ, Guo SW, Liu YN and Du LX: J. Mater. Res., 2013, vol. 28, pp. 757-65.10.1557/jmr.2012.397 ↗
28. [28] Zheng CS, Li LF, Yang WY and Sun ZQ: Acta Metall. Sin., 2013, vol. 49, pp. 257-64.10.3724/SP.J.1037.2012.00503 ↗
29. [29] Dunstan DJ and Bushby AJ: Int. J. Plasticity, 2014, vol. 53, pp. 56-65.10.1016/j.ijplas.2013.07.004 ↗
30. [30] Galindo-Nava EI and Rivera-Díaz-del-Castillo PEJ: Acta Mater., 2015, vol. 98, pp. 81-93.10.1016/j.actamat.2015.07.018 ↗
31. [31] Fan L, Zhou D, Wang T, Li S and Wang Q: Mat. Sci. Eng. A, 2014, vol. 590, pp. 224-31.10.1016/j.msea.2013.10.037 ↗
32. Walentek A, Seefeldt M, Verlinden B, Aernoudt E and Van HP: J. Microsc. Oxf., 2006, vol. 224, pp. 256.10.1111/j.1365-2818.2006.01702.x ↗
33. [33] Hu T, Ma K, Topping TD, Saller B, Yousefiani A, Schoenung JM and Lavernia EJ: Scripta Mater., 2014, vol. 78-79, pp. 25-28.10.1016/j.scriptamat.2014.01.020 ↗
34. [34] Hyzak JM and Bernstein IM: Metall. Trans. A, 1976, vol. 7, pp. 1217-24.10.1007/BF02656606 ↗
35. [35] Zhu YT and Liao X: Nat. Mater., 2004, vol. 3, pp. 351.10.1038/nmat1141 ↗
36. [36] Toribio J, González B, Matos J and Ayaso F: Metals, 2016, vol. 6, pp. 318.10.3390/met6120318 ↗