journal article·2017-10

A Homogeneous Billet Layer Casting Fabrication Method

FengLi Ren, JunGe Wang, HongHao Ge, Jun Li, Qiaodan Hu, Hari-Babu Nadendla, MingXu Xia, JianGuo Li

Publisher page

Abstract

A novel additive casting approach, termed as layer casting (LC), was proposed to fabricate ingots with homogeneous composition and grain structure distribution. Ingots of Al-4.5 wt pct Cu were fabricated using conventional and novel methods to verify the feasibility of this novel approach. The results show that the novel processing not only alleviates macrosegregation but also reduces the shrinkage cavity and improves the tensile properties of the as-cast condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. H. Bikas, P. Stavropoulos and G. Chryssolouris: Int. J. Adv. Manuf. Technol. 2016, vol. 83, pp. 389-405.10.1007/s00170-015-7576-2 ↗
2. J. P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts and B. Lauwers: J. Mater. Process. Technol. 2004, vol. 149, pp. 616-622.10.1016/j.jmatprotec.2003.11.051 ↗
3. E. Louvis, P. Fox and C. J. Sutcliffe: J. Mater. Process. Technol. 2011, vol. 211, pp. 275-284.10.1016/j.jmatprotec.2010.09.019 ↗
4. A. Ludwig, M. Wu and A. Kharicha: Metall. Mat. Trans. A 2015, vol. 46, pp. 4854-4867.10.1007/s11661-015-2959-4 ↗
5. Y. Tanaka and I. Sato: J. Nucl. Mater. 2011, vol. 417, pp. 854-859.10.1016/j.jnucmat.2010.12.305 ↗
6. D. Li, X. Chen, P. Fu, X. Ma, H. Liu, Y. Chen, Y. Cao, Y. Luan, and Y. Li: Nat. Commun. 2014, vol. 5.10.1038/ncomms6572 ↗
7. H. Ge, F. Ren, J. Li, X. Han, M. Xia and J. Li, Metall. Mat. Trans. A 2017, vol. 48, pp. 1139-1150.10.1007/s11661-016-3910-z ↗
8. H. Ge, J. Li, X. Han, M. Xia and J. Li, J. Mater. Process. Technol.2016, vol. 227, pp. 308-317.10.1016/j.jmatprotec.2015.08.020 ↗
9. M. C. Flemings: Scand J. Metall. 1976, vol. 5, pp. 1-15.
10. K. Tashiro, S. Watanabe, I. Kitagawa and I. Tamura: Trans. Iron and Steel Inst. Jpn. 1983, vol. 23, pp. 312-321.10.2355/isijinternational1966.23.312 ↗
11. S. Qian, X. Hu, Y. Cao, X. Kang and D. Li: Mater. Des. 2015, vol. 87, pp. 205-214.10.1016/j.matdes.2015.07.150 ↗
12. B. Sang, X. Kang and D. Li: J. Mater. Process. Technol. 2010, vol. 210, pp. 703-711.10.1016/j.jmatprotec.2009.12.010 ↗
13. M. Tateno: Trans. Iron Steel Inst. Jpn. 1985, vol. 25, pp. 97-108.10.2355/isijinternational1966.25.97 ↗
14. G. Lesoult: Mater. Sci. Eng. A 2005, vol. 413-414, pp. 19-29.10.1016/j.msea.2005.08.203 ↗
15. J. Li, B. Wang, and J. Li, In 4th International Conference on Advanced Solidification Processes (ICASP-4), Windsor, UK, 2014.
16. J. A. Spittle: Int. Mater. Rev. 2006, vol. 51, pp. 247-269.10.1179/174328006X102493 ↗
17. M. Rappaz and Ch A. Gandin: Acta Metall. Et Mater. 1993, vol. 41, pp. 345-360.10.1016/0956-7151(93)90065-Z ↗
18. M. C. Schneider and C. Beckermann: Metall. Mat. Trans. A 1995, vol. 26, pp. 2373-2388.10.1007/BF02671251 ↗
19. A. Hultgren: Scand. J. Metall. 1973, vol. 2, pp. 217-227.
20. D.M. Stefanescu: In Shape Casting - The John Campbell Symposium - TMS 2005 Annual Meeting, M. Tiryakioglu, and Crepeau P.N., ed. San Francisco, CA, 2005, pp. 295–304.
21. E.O. Hall: Proc. Phys. Soc. Sect. B 1951, vol. 64, pp. 747–753.10.1088/0370-1301/64/9/303 ↗
22. M. Gupta, M. O. Lai and C. Y. Soo: Mater. Sci. Eng. A 1996, vol. 210, pp. 114-122.10.1016/0921-5093(95)10077-6 ↗
23. K. Kubo and R. D. Pehlke: Metall. Trans. B 1985, vol. 16, pp. 359-366.10.1007/BF02679728 ↗