Microstructure Investigation of Cu-Ni Base Al2O3 Nanocomposites: From Nanoparticles Synthesis to Consolidation
Source abstract
Abstract
Different compositions of Cu-Ni/Al2O3 nanocomposites were prepared by a chemical-based synthesis of co-formed oxides (CuO-NiO-Al2O3) nanoparticles followed by selective hydrogen reduction of the Cu and Ni oxides and finally by consolidation into pellets. The synthesized composites with both phases (metallic and oxide) containing nanoparticles in the 5 to 60 nm range have been systematically produced. Micro- and nanoscale characterization techniques were extensively employed in all stages of the process. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses have shown a heterogeneous distribution of chemical elements resulting in the formation of Cu- and Ni-rich nanoparticles containing Al2O3 phase in a controlled low volume fraction, which later mostly dispersed between the metallic particle and, to a lesser extent, within metallic particles. After consolidation, under uniaxial pressure followed by sintering, the compacted nanocomposite observed in the transmission electron microscope (TEM) revealed that the Al2O3 have been more homogeneously distributed as such: the majority of it at the newly formed grain boundaries of the consolidated pellet and a small part of it within the metallic Cu-Ni matrix. Microhardness measurements demonstrate that dispersion of Al2O3 was successfully achieved as reinforcement phase, yielding up to 100 pct increase in hardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. I. Omar, F. Zucchi, and G. Trabanelli: Surf Coat Technol., 1986, vol. 29, pp. 141–51.10.1016/0257-8972(86)90025-3 ↗
2. L. Durivault, O. Brylev, D. Reyter, M. Sarrazin, D. Bélanger, and L. Roué: J. Alloys Compd., 2007, vol. 432, pp. 323–32.10.1016/j.jallcom.2006.06.023 ↗
3. P.H.K. Charan and G.R. Rao: Micropor. Mesopor. Mater., 2014, vol. 200, pp. 101–09.10.1016/j.micromeso.2014.08.029 ↗
4. J. Chatterjee, M. Bettge, Y. Haik, and C. Chen: J. Mag. Mag. Mater., 2005, vol. 293, pp. 303–09.10.1016/j.jmmm.2005.02.024 ↗
5. J.L. Strudel: Physical Metallurgy, Elsevier Science B.V., Amsterdam, 1996, pp. 2106–06.
6. F. Ren, A. Zhi, D. Zhang, B. Tian, A.A. Volinsky, and X. Shen: J. Alloys Compd., 2015, vol. 633, pp. 323–28.10.1016/j.jallcom.2015.02.057 ↗
7. H. Nasiri, J.V. Khaki, and S.M. Zebarjad: J. Alloys Compd., 2011, vol. 509, pp. 5305–08.10.1016/j.jallcom.2011.01.185 ↗
8. Y. Wu, X. Liu, J. Zhang, J. Qin, and C. Li: Mater. Sci. Eng. A., 2010, vol. 527, pp. 1544–07.10.1016/j.msea.2009.10.041 ↗
9. V. Rajkovic, D. Bozic, A. Devecerski, and M. Jovanovic: Mater. Charact., 2012, vol. 67, pp. 129–37.10.1016/j.matchar.2012.02.022 ↗
10. W.X. Chen, J.P. Tu, L.Y. Wang, H.Y. Gan, Z.D. Xu, and X.B. Zhang: Carbon N. Y., 2003, vol. 41, pp. 215–22.10.1016/S0008-6223(02)00265-8 ↗
11. S.R. Dong, J.P. Tu, and X.B. Zhang: Mater. Sci. Eng. A., 2001, vol. 313, pp. 83–87.10.1016/S0921-5093(01)00963-7 ↗
12. P. Quang, Y.G. Jeong, S.C. Yoon, S.H. Hong, and H.S. Kim: J. Mater. Proces. Technol., 2007, vol. 187–188, pp. 318–20.10.1016/j.jmatprotec.2006.11.116 ↗
13. E. Brocchi, M. Motta, and P.K. Jena: Metall. Trans. B., 2004, vol. 35B, pp. 1107–12.
14. M.A. Cangiano, M.W. Ojeda, A.C. Carreras, J. González, and M. Ruiz: Mater. Charact., 2010, vol. 61, pp. 1135–46.10.1016/j.matchar.2010.07.006 ↗
15. A. Carreras, M. Cangiano, M.W. Ojeda, and M. Ruiz: Mater. Charact., 2015, vol. 101, pp. 40–48.10.1016/j.matchar.2014.12.021 ↗
16. E. Brocchi, F. Moura, and D. Macedo: Miner. Process. Extr. Metall., 2009, vol. 118, pp. 44–48. doi:10.1179/174328508X37538610.1179/174328508X375386 ↗
17. E. Brocchi, R. Navarro, M. Motta, F. Moura, and G. Solórzano: Mater. Chem. Phys., 2013, vol. 140, pp. 273–83.10.1016/j.matchemphys.2013.03.034 ↗
18. O. Cortez, F. Moura, E. Brocchi, R. Navarro, and R. Souza: Metall. Mater. Trans. B., 2014, vol. 45, pp. 2033–39.10.1007/s11663-014-0221-x ↗
19. E. Brocchi, M.S. Motta, I.G. Solórzano, P.K. Jena, and F.J. Moura: J. Metast. Nanocryst. Mater., 2004, vol. 22, pp. 77–82.10.4028/www.scientific.net/JMNM.22.77 ↗
20. F. Shehata, M. Abdelhameed, A. Fathy, and M. Elmahdy: Open J. Met., 2011, vol. 01, pp. 25–33.10.4236/ojmetal.2011.12004 ↗
21. G. Ferk, J. Stergar, M. Drofenik, D. Makovec, A. Hamler, Z. Jagličić, and I. Ban: Mater. Lett., 2014, vol. 124, pp. 39–42.10.1016/j.matlet.2014.03.030 ↗
22. Z. Huaa, Z. Cao, Y. Dengc, Y. Jianga, and S Yanga: Mater. Chem. Phys., 2011, vol. 126, pp. 542–45.10.1016/j.matchemphys.2011.01.033 ↗